FCC ID PD9512ANXM
Intel Wi-Fi/WiMax Link 5150
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 512ANXM
Latest application date: 2008-09-16
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2496-2690 MHz | Original Equipment | 2008-09-16 |
| 5180-5240 MHz | Original Equipment | 2008-09-16 |
| 2412-2462 MHz | Original Equipment | 2008-09-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2008-09-16 | PDF 731.5 KB |
| Internal Photos | Internal Photos | 2008-09-16 | PDF 1.7 MB |
| External Photos | External Photos | 2008-09-16 | PDF 765 KB |
| Label and Location | ID Label/Location Info | 2008-09-16 | PDF 557.1 KB |
| Test Setup Photos | Test Setup Photos | 2008-09-16 | PDF 2.1 MB |
| DFS Test Report | Test Report | 2008-09-16 | PDF 186.4 KB |
| Test Report | Test Report | 2008-09-16 | PDF 1.8 MB |
| Test Report | Test Report | 2008-09-16 | PDF 577.6 KB |
| Test Report | Test Report | 2008-09-16 | PDF 1.3 MB |
| Test Report | Test Report | 2008-09-16 | PDF 2.5 MB |
| Attestation Statement | Attestation Statements | 2008-09-16 | PDF 251 KB |
| Authorization Letter | Cover Letter(s) | 2008-09-16 | PDF 288.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2008-09-16 | PDF 379.4 KB |
| Cover Letter | Cover Letter(s) | 2008-09-16 | PDF 24.4 KB |
| Cover Letter | Cover Letter(s) | 2008-09-16 | PDF 24.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2008-09-16 | PDF 22.6 KB |
| RF Exposure MPE | RF Exposure Info | 2008-09-16 | PDF 118.5 KB |
Application Information
| Application ID | fhDeiQzg3Ot/+D0r0bOb4w== |
|---|---|
| Final Action Date | 2008-09-16 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008035131 |
| Model | 512ANXM |
| Frequency Range | 2496-2690 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Intel Wi-Fi/WiMax Link 5150 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| Technical Contact | Johnny Candelas, Aegis Labs, Johnny@aegislabsinc.com  , 949-454-8295 |
| Test Firm | Steve Kuiper, AEGIS Labs, Inc., steve@aegislabsinc.com , 949-454-8295 |
| TCB Email | Hotline@atcb.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.258W. Only those antenna(s) as shown in this filing with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of at least 20cm from persons to satisfy RF exposure requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fhDeiQzg3Ot/+D0r0bOb4w== | 2008-09-16 | Original Equipment |
| 6bgbiV98+/InhmaVYEVSKg== | 2008-09-16 | Original Equipment |
| 1rjIvvtQc2aHqQZ19WyMGg== | 2008-09-16 | Original Equipment |
| +VDdilTHrQf+oG3+mg1Ufg== | 2008-09-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 2412-2462 MHz | 0.632 | 15C | CC | ||
| 2496-2690 MHz | 0.205 | 2.5ppm | 9M16G7D | 27 | CC |
| 2496-2690 MHz | 0.2 | 2.5ppm | 9M13W7D | 27 | CC |
| 2496-2690 MHz | 0.24 | 2.5ppm | 4M59G7D | 27 | CC |
| 2496-2690 MHz | 0.242 | 2.5ppm | 4M51W7D | 27 | CC |
| 5180-5240 MHz | 0.046 | 15E | CC, ND | ||
| 5260-5320 MHz | 0.048 | 15E | CC, ND | ||
| 5500-5700 MHz | 0.047 | 15E | CC, ND | ||
| 5725-5850 MHz | 0.338 | 15C | CC |
Grants
TCB Grant - Application fhDeiQzg3Ot/+D0r0bOb4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 27 | 2496.0 - 2690.0 | 0.205 | 2.5 PM | 9M16G7D |
| CC | 27 | 2496.0 - 2690.0 | 0.2 | 2.5 PM | 9M13W7D |
| CC | 27 | 2496.0 - 2690.0 | 0.24 | 2.5 PM | 4M59G7D |
| CC | 27 | 2496.0 - 2690.0 | 0.242 | 2.5 PM | 4M51W7D |
| Single Modular |
| Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.258W. Only those antenna(s) as shown in this filing with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of at least 20cm from persons to satisfy RF exposure requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fhDeiQzg3Ot/+D0r0bOb4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 27 | 2496.0 - 2690.0 | 0.205 | 2.5 PM | 9M16G7D |
| CC | 27 | 2496.0 - 2690.0 | 0.2 | 2.5 PM | 9M13W7D |
| CC | 27 | 2496.0 - 2690.0 | 0.24 | 2.5 PM | 4M59G7D |
| CC | 27 | 2496.0 - 2690.0 | 0.242 | 2.5 PM | 4M51W7D |
| Single Modular |
| Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.258W. Only those antenna(s) as shown in this filing with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of at least 20cm from persons to satisfy RF exposure requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.046 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.047 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 6bgbiV98+/InhmaVYEVSKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.046 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.047 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1rjIvvtQc2aHqQZ19WyMGg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.632 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.338 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +VDdilTHrQf+oG3+mg1Ufg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/16/2008 Application Dated: 09/15/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9512ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi/WiMax Link 5150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.632 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.338 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |