FCC ID PD9533ANXM
Intel WiFi/WiMax Link 5350
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 533ANXM
Latest application date: 2008-05-11
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2501-2685 MHz | Original Equipment | 2008-05-11 |
| 5180-5240 MHz | Original Equipment | 2008-05-11 |
| 2412-2462 MHz | Original Equipment | 2008-05-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual user guide | Users Manual | 2008-05-11 | PDF 764.3 KB |
| Manual wimax guide | Users Manual | 2008-05-11 | PDF 731.5 KB |
| WiMax user guide | Users Manual | 2008-05-11 | PDF 731.5 KB |
| Internal photos | Internal Photos | 2008-05-11 | PDF 388.8 KB |
| External photos | External Photos | 2008-05-11 | PDF 200 KB |
| FCC ID label | ID Label/Location Info | 2008-05-11 | PDF 16.7 KB |
| Label location | ID Label/Location Info | 2008-05-11 | PDF 125.6 KB |
| Set up photos | Test Setup Photos | 2008-05-11 | PDF 728.8 KB |
| Setup photos | Test Setup Photos | 2008-05-11 | PDF 728.8 KB |
| DFS test report | Test Report | 2008-05-11 | PDF 1.2 MB |
| Test report | Test Report | 2008-05-11 | PDF 2.8 MB |
| Test report | Test Report | 2008-05-11 | PDF 581.5 KB |
| Test report 1 | Test Report | 2008-05-11 | PDF 1.3 MB |
| Test report 2 | Test Report | 2008-05-11 | PDF 2.9 MB |
| Cover letter | Cover Letter(s) | 2008-05-11 | PDF 23.8 KB |
| POA | Cover Letter(s) | 2008-05-11 | PDF 131.7 KB |
| Request for confidentiality | Cover Letter(s) | 2008-05-11 | PDF 137.4 KB |
| Request for modular approval | Cover Letter(s) | 2008-05-11 | PDF 188.2 KB |
| MPE | RF Exposure Info | 2008-05-11 | PDF 123.7 KB |
Application Information
| Application ID | eGYoe2OwOWTQy9SqS3mwSQ== |
|---|---|
| Final Action Date | 2008-05-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008035131 |
| Model | 533ANXM |
| Frequency Range | 2501-2685 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Intel WiFi/WiMax Link 5350 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.242W. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a minimum seperation distance of at least 20cm from persons to satisfy rf exposure requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eGYoe2OwOWTQy9SqS3mwSQ== | 2008-05-11 | Original Equipment |
| RpehEfU/UQdf5aabp+iBtA== | 2008-05-11 | Original Equipment |
| EoUBa0Ag9Rjvto5EYTbg0A== | 2008-05-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2412-2462 MHz | 0.211 | 15C | CC, MO | ||
| 2501-2685 MHz | 0.211 | 2.5ppm | 9M13G7D | 27 | |
| 2501-2685 MHz | 0.21 | 2.5ppm | 9M10W7D | 27 | |
| 2501-2685 MHz | 0.207 | 2.5ppm | 4M54G7D | 27 | |
| 2501-2685 MHz | 0.206 | 2.5ppm | 4M50W7D | 27 | |
| 5180-5240 MHz | 0.048 | 15E | CC, MO | ||
| 5260-5320 MHz | 0.048 | 15E | CC, MO, ND | ||
| 5500-5700 MHz | 0.048 | 15E | CC, MO, ND | ||
| 5745-5825 MHz | 0.312 | 15C | CC, MO |
Grants
TCB Grant - Application RpehEfU/UQdf5aabp+iBtA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.048 |
| Single Modular |
| Power Output listed is Conducted. Modular approval. MIMO3x3. This device may operate in the Client only configuration. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application RpehEfU/UQdf5aabp+iBtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.048 |
| Single Modular |
| Power Output listed is Conducted. Modular approval. MIMO3x3. This device may operate in the Client only configuration. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.211 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.312 |
| Single Modular |
| Power Output listed is conducted. Modular approval. MIMO3x3. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application EoUBa0Ag9Rjvto5EYTbg0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.211 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.312 |
| Single Modular |
| Power Output listed is conducted. Modular approval. MIMO3x3. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2501.0 - 2685.0 | 0.211 | 2.5 PM | 9M13G7D | |
| 27 | 2501.0 - 2685.0 | 0.21 | 2.5 PM | 9M10W7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 2.5 PM | 4M54G7D | |
| 27 | 2501.0 - 2685.0 | 0.206 | 2.5 PM | 4M50W7D |
| Single Modular |
| Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.242W. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a minimum seperation distance of at least 20cm from persons to satisfy rf exposure requirements. |
EAS Grant - Application eGYoe2OwOWTQy9SqS3mwSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/11/2008 Application Dated: 04/29/2008 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9533ANXM |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel WiFi/WiMax Link 5350 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2501.0 - 2685.0 | 0.211 | 2.5 PM | 9M13G7D | |
| 27 | 2501.0 - 2685.0 | 0.21 | 2.5 PM | 9M10W7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 2.5 PM | 4M54G7D | |
| 27 | 2501.0 - 2685.0 | 0.206 | 2.5 PM | 4M50W7D |
| Single Modular |
| Output is at the antenna terminal of the device. Modular Transmitter. Max EIRP is 0.242W. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a minimum seperation distance of at least 20cm from persons to satisfy rf exposure requirements. |
| Mail To: |