FCC ID PD9612BNXH
Intel Centrino Wireless-N+WiMax 6150
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 612BNXH
Latest application date: 2011-06-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2498.5-2687.5 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-29 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-29 |
| 2498.5-2687.5 MHz | Original Equipment | 2010-09-27 |
| 2412-2462 MHz | Original Equipment | 2010-09-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-06-29 | PDF 223.5 KB |
| User Manual | Users Manual | 2011-03-23 | PDF 751.9 KB |
| Internal Photos | Internal Photos | 2011-03-23 | PDF 5 MB |
| External Photos | External Photos | 2011-03-23 | PDF 4.8 MB |
| Label and Location | ID Label/Location Info | 2010-09-27 | PDF 472.8 KB |
| Test Setup Photos | Test Setup Photos | 2011-03-23 | PDF 890.8 KB |
| Test Setup Photos 1 | Test Setup Photos | 2011-03-22 | PDF 1.2 MB |
| Test Setup Photos 1 | Test Setup Photos | 2011-03-22 | PDF 1 MB |
| Test Setup Photos 2 | Test Setup Photos | 2011-03-22 | PDF 1.2 MB |
| Test Setup Photos 2 | Test Setup Photos | 2011-03-22 | PDF 1 MB |
| Test Report DTS | Test Report | 2010-09-27 | PDF 726.2 KB |
| Test Report JBP | Test Report | 2010-09-27 | PDF 286.7 KB |
| Test Report TNB | Test Report | 2010-09-27 | PDF 563.9 KB |
| Agency Letter | Cover Letter(s) | 2011-06-29 | PDF 16.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-06-29 | PDF 17.2 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-06-29 | PDF 16.3 KB |
| Authorization Letter | Cover Letter(s) | 2010-09-27 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2010-09-27 | PDF 109.7 KB |
| Confidentiality Letter Rev | Cover Letter(s) | 2010-09-27 | PDF 109.7 KB |
| Cover Letter | Cover Letter(s) | 2010-09-27 | PDF 161.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2010-09-27 | PDF 21.5 KB |
| RF Exposure SAR Report Revised | RF Exposure Info | 2011-06-29 | PDF 2.5 MB |
| RF Exposure MPE | RF Exposure Info | 2010-09-27 | PDF 22 KB |
Application Information
| Application ID | noQpUvxFBIEPOVvXvvQDxg== |
|---|---|
| Final Action Date | 2011-06-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 612BNXH |
| Frequency Range | 2498.5-2687.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Intel Centrino Wireless-N+WiMax 6150 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| Technical Contact | Jay Moulton, RF Exposure Lab, info@rfexposurelab.com  , 760-471-2100 |
| Test Firm | David Bare, National Technical Systems - Silicon Valley, david.bare@nts.com  , 510-578-3500 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval Transmitter. Power output is at the antenna terminal of the device. Max EIRP is 0.589W.This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 18mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 18mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 18mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.375 W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| noQpUvxFBIEPOVvXvvQDxg== | 2011-06-29 | Class II permissive change or modification of presently authorized equipment |
| 2rk9zMLE7CME3xZObb93HA== | 2011-06-29 | Class II permissive change or modification of presently authorized equipment |
| TTborS4DmSyN/FbZsLWcnQ== | 2010-09-27 | Original Equipment |
| KAIq3i2kIALPjGztRkGg8A== | 2010-09-27 | Original Equipment |
| +QG7AtIhcIgDgfxBv9QR6w== | 2010-09-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TTborS4DmSyN/FbZsLWcnQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2010 Application Dated: 09/24/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2498.5 - 2687.5 | 0.263 | 2.5 PM | 4M50D2W | |
| 27 | 2501.0 - 2685.0 | 0.229 | 2.5 PM | 9M40D2W |
| Modular Approval Transmitter. Power output is at the antenna terminal of the device. Max EIRP is 0.589W. Only those antenna(s) as shown in this filing with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. |
EAS Grant - Application TTborS4DmSyN/FbZsLWcnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2010 Application Dated: 09/24/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2498.5 - 2687.5 | 0.263 | 2.5 PM | 4M50D2W | |
| 27 | 2501.0 - 2685.0 | 0.229 | 2.5 PM | 9M40D2W |
| Modular Approval Transmitter. Power output is at the antenna terminal of the device. Max EIRP is 0.589W. Only those antenna(s) as shown in this filing with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/29/2011 Application Dated: 06/29/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2498.5 - 2687.5 | 0.263 | 2.5 PM | 4M50D2W | |
| 27 | 2501.0 - 2685.0 | 0.229 | 2.5 PM | 9M40D2W |
| Modular Approval Transmitter. Power output is at the antenna terminal of the device. Max EIRP is 0.589W.This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 18mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 18mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 18mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.375 W/kg |
EAS Grant - Application noQpUvxFBIEPOVvXvvQDxg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/29/2011 Application Dated: 06/29/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2498.5 - 2687.5 | 0.263 | 2.5 PM | 4M50D2W | |
| 27 | 2501.0 - 2685.0 | 0.229 | 2.5 PM | 9M40D2W |
| Modular Approval Transmitter. Power output is at the antenna terminal of the device. Max EIRP is 0.589W.This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 18mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 18mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 18mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.375 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2010 Application Dated: 09/23/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.059 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KAIq3i2kIALPjGztRkGg8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2010 Application Dated: 09/23/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.059 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/29/2011 Application Dated: 06/29/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.059 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 18mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 18mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 18mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.375 W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2rk9zMLE7CME3xZObb93HA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/29/2011 Application Dated: 06/29/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.06 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.059 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 18mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 18mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 18mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.375 W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2010 Application Dated: 09/23/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application +QG7AtIhcIgDgfxBv9QR6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2010 Application Dated: 09/23/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9612BNXH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Wireless-N+WiMax 6150 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: |