FCC ID PD962205ANHU

FCC ID	PD962205ANHU
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	PD9
Product Code	62205ANHU
Applicant Business	Intel Corporation 🇺🇸
Related Domains	intel.com
Equipment Class	Intel Centrino Advanced-N 6205
Test Firm	National Technical Systems

Frequency Range	Application Purpose	Final Action Date
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2016-05-25
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2016-05-25
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2011-07-15
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2011-07-15
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2011-06-28
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2011-06-28
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2011-05-25
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2011-05-25
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2011-03-23
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2011-03-23
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2011-03-04
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2011-03-04
2421-2462 MHz	Original Equipment	2010-09-14
5180-5230 MHz	Original Equipment	2010-09-14

Document	Type	Available	File
User Manaul	Users Manual	2016-05-25	PDF 71.7 KB
User Manual	Users Manual	2011-08-05	PDF 1.2 MB
User Manual	Users Manual	2011-08-05	PDF 2.9 MB
User Manual 1	Users Manual	2011-08-05	PDF 1.8 MB
User Manual 2	Users Manual	2011-08-05	PDF 942.1 KB
User Manual 1	Users Manual	2011-06-28	PDF 751.9 KB
User Manual 2	Users Manual	2011-06-28	PDF 19.5 KB
User Manual	Users Manual	2011-05-25	PDF 223.5 KB
User Manual	Users Manual	2011-03-13	PDF 751.9 KB
Internal Photos	Internal Photos	2011-03-13	PDF 763.7 KB
External Photos	External Photos	2010-09-14	PDF 745.2 KB
Label and Location	ID Label/Location Info	2011-07-15	PDF 713.9 KB
Label and Location	ID Label/Location Info	2010-09-14	PDF 872 KB
Test Setup Photos	Test Setup Photos	2011-08-05	PDF 258.6 KB
Test Setup Photos	Test Setup Photos	2011-08-05	PDF 413.1 KB
Test Setup Photos	Test Setup Photos	2011-08-05	PDF 507.3 KB
Test Setup Photos	Test Setup Photos	2011-06-28	PDF 3.3 MB
Test Setup Photos	Test Setup Photos	2011-03-13	PDF 337.3 KB
Test Setup Photos	Test Setup Photos	2011-03-13	PDF 1.6 MB
Test Report	Test Report	2011-06-28	PDF 462.4 KB
Test Report	Test Report	2011-06-28	PDF 483.5 KB
SAR Test Report	Test Report	2011-03-23	PDF 3.5 MB
Test Report	Test Report	2010-09-14	PDF 319.1 KB
Test Report DFS	Test Report	2010-09-14	PDF 315 KB
Test Report DTS	Test Report	2010-09-14	PDF 1.6 MB
Test Report NII	Test Report	2010-09-14	PDF 1.7 MB
Hardware Antenna Attestation	Attestation Statements	2016-05-25	PDF 230.8 KB
Passive Scan Letter	Attestation Statements	2016-05-25	PDF 16.4 KB
Passive Scan Attestation	Attestation Statements	2011-07-15	PDF 113.5 KB
Attestation Letter Passive Scan	Attestation Statements	2011-06-28	PDF 113.5 KB
Attestation Letter Passive Scan	Attestation Statements	2011-05-25	PDF 74.3 KB
Attestation Letter Passive Scan	Attestation Statements	2011-03-23	PDF 86.5 KB
New Passive Scan Attestation	Attestation Statements	2011-03-23	PDF 37.7 KB
Attestation Letter Passive Scan	Attestation Statements	2011-03-04	PDF 37.6 KB
Channel Attestation Letter	Attestation Statements	2011-03-04	PDF 37.7 KB
Modular Approval Letter	Attestation Statements	2010-09-14	PDF 22.1 KB
Passive Scan Attestation	Attestation Statements	2010-09-14	PDF 16.4 KB
Permissive Change Letter	Cover Letter(s)	2016-05-25	PDF 253.9 KB
Software Security Letter	Cover Letter(s)	2016-05-25	PDF 458.1 KB
Authorization Letter	Cover Letter(s)	2011-07-15	PDF 17.3 KB
Confidentiality Letter	Cover Letter(s)	2011-07-15	PDF 20.2 KB
Permissive Change Letter	Cover Letter(s)	2011-07-15	PDF 16.6 KB
Agency Letter	Cover Letter(s)	2011-06-28	PDF 16.3 KB
Confidentiality Letter	Cover Letter(s)	2011-06-28	PDF 19.6 KB
Permissive Change Letter	Cover Letter(s)	2011-06-28	PDF 53.2 KB
Agency Letter	Cover Letter(s)	2011-05-25	PDF 16.7 KB
Confidentiality Letter	Cover Letter(s)	2011-05-25	PDF 17.3 KB
Permissive Change Letter	Cover Letter(s)	2011-05-25	PDF 16 KB
Request for superced	Cover Letter(s)	2011-05-25	PDF 21.9 KB
Supercede request	Cover Letter(s)	2011-05-25	PDF 21.9 KB
Authorization Letter	Cover Letter(s)	2011-03-23	PDF 16.6 KB
Confidentiality Letter	Cover Letter(s)	2011-03-23	PDF 19.8 KB
Permissive Change Letter	Cover Letter(s)	2011-03-23	PDF 16.1 KB
Authorization Letter	Cover Letter(s)	2011-03-04	PDF 16.9 KB
Confidentiality Letter	Cover Letter(s)	2011-03-04	PDF 19.8 KB
Permissive Change Letter	Cover Letter(s)	2011-03-04	PDF 16.1 KB
Authorization Letter	Cover Letter(s)	2010-09-14	PDF 16.3 KB
Confidentiality Letter	Cover Letter(s)	2010-09-14	PDF 20.1 KB
Cover Letter	Cover Letter(s)	2010-09-14	PDF 157.1 KB
RF SAR Report	RF Exposure Info	2011-07-15	PDF 2.3 MB
RF Exposure MPE	RF Exposure Info	2011-06-28	PDF 24.1 KB
RF Exposure MPE Info	RF Exposure Info	2011-06-28	PDF 24.1 KB
Rev SAR Pt I	RF Exposure Info	2011-05-25	PDF 2.7 MB
Rev SAR Pt II	RF Exposure Info	2011-05-25	PDF 3.1 MB
Rev SAR report Part I	RF Exposure Info	2011-05-25	PDF 2.7 MB
Rev SAR report Part II	RF Exposure Info	2011-05-25	PDF 3.1 MB
SAR Report	RF Exposure Info	2011-03-04	PDF 2.6 MB
RF Exposure Antenna Info	RF Exposure Info	2010-09-14	PDF 1 MB

Application ID	DnAAZt+xNZBk48mG4E40dw==
Final Action Date	2016-05-25
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0008035131
Model	62205ANHU
Frequency Range	2412-2462 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	Intel Centrino Advanced-N 6205
Responsible Party	Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com , 803-315-6704
Technical Contact	Steven Hackett, Intel Mobile Communications, Steven.C.Hackett@Intel.com , 8032162344
Test Firm	David Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Email	Hotline@acbcert.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power Output listed is conducted. This filing is a modular approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band.

Application ID	Date	Purpose
DnAAZt+xNZBk48mG4E40dw==	2016-05-25	Class II permissive change or modification of presently authorized equipment
1lY0wKwFSCdEIUR8Uc4zwA==	2016-05-25	Class II permissive change or modification of presently authorized equipment
IOdf2s3THzC1oAesuswsHw==	2011-07-15	Class II permissive change or modification of presently authorized equipment
F9NHPR+d1zMELeUs1SMCUw==	2011-07-15	Class II permissive change or modification of presently authorized equipment
stFP3SJJPflFDz9t9GS5VA==	2011-06-28	Class II permissive change or modification of presently authorized equipment
YQYg1p2/tZYCMsT63CGhRA==	2011-06-28	Class II permissive change or modification of presently authorized equipment
hb09AiXfZiHaQQwQzU21AA==	2011-05-25	Class II permissive change or modification of presently authorized equipment
AA9twK/FkCQUMjnFDzSfwQ==	2011-05-25	Class II permissive change or modification of presently authorized equipment
lT4Dsv2tBNlc0rbz6HsnTQ==	2011-03-23	Class II permissive change or modification of presently authorized equipment
1DqAnjbqLa15ueWCnwu+Og==	2011-03-23	Class II permissive change or modification of presently authorized equipment
x4HALvGcFfddZyfkSOMMtQ==	2011-03-04	Class II permissive change or modification of presently authorized equipment
PT0wavgMk5Cpy3zASWPXwg==	2011-03-04	Class II permissive change or modification of presently authorized equipment
u2FMMF5rgJw4aA234pf6RA==	2010-09-14	Original Equipment
MQ/p0SgPwTw2yoa1Y8xf8g==	2010-09-14	Original Equipment
0DrFY1xtVxg3OhTcfb1HNg==	2010-09-14	Original Equipment

Frequency	Output	Rules	Grant Notes
2412-2462 MHz	0.117	15C	CC, MO
2421-2462 MHz	0.117	15C	CC, MO
2422-2452 MHz	0.032	15C	CC, MO
2422-2452 MHz	0.033	15C	CC, MO
5180-5240 MHz	0.032	15E	38, CC, MO
5180-5230 MHz	0.032	15E	CC, MO
5180-5240 MHz	0.032	15E	CC, MO
5190-5230 MHz	0.03	15E	38, CC, MO
5190-5230 MHz	0.03	15E	CC, MO
5260-5320 MHz	0.028	15E	38, CC, MO, ND
5260-5320 MHz	0.028	15E	CC, MO, ND
5270-5310 MHz	0.029	15E	38, CC, MO, ND
5270-5310 MHz	0.029	15E	CC, MO, ND
5500-5700 MHz	0.033	15E	38, CC, MO, ND
5500-5700 MHz	0.033	15E	CC, MO, ND
5500-5700 MHz	0.33	15E	CC, MO, ND
5510-5670 MHz	0.034	15E	38, CC, MO, ND
5510-5670 MHz	0.034	15E	CC, MO, ND
5745-5825 MHz	0.036	15C	CC, MO
5745-5825 MHz	0.036	15E	49, CC, MO, ND
5755-5795 MHz	0.12	15C	CC, MO
5755-5795 MHz	0.12	15E	49, CC, MO, ND

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/28/2011

Application Dated: 06/28/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.033
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 06/28/2011

Application Dated: 06/28/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.033
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application x4HALvGcFfddZyfkSOMMtQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/04/2011

Application Dated: 03/04/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 03/04/2011

Application Dated: 03/04/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application u2FMMF5rgJw4aA234pf6RA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Intel Centrino Advanced-N 6205

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

TCB Grant - Application stFP3SJJPflFDz9t9GS5VA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/28/2011

Application Dated: 06/28/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 06/28/2011

Application Dated: 06/28/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application PT0wavgMk5Cpy3zASWPXwg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/04/2011

Application Dated: 03/04/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 03/04/2011

Application Dated: 03/04/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MQ/p0SgPwTw2yoa1Y8xf8g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2421.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2421.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lT4Dsv2tBNlc0rbz6HsnTQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/23/2011

Application Dated: 03/22/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 03/23/2011

Application Dated: 03/22/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application IOdf2s3THzC1oAesuswsHw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/15/2011

Application Dated: 07/14/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 07/15/2011

Application Dated: 07/14/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application hb09AiXfZiHaQQwQzU21AA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 05/25/2011

Application Dated: 05/25/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 05/25/2011

Application Dated: 05/25/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F9NHPR+d1zMELeUs1SMCUw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/15/2011

Application Dated: 07/14/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.33
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 07/15/2011

Application Dated: 07/14/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.33
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DnAAZt+xNZBk48mG4E40dw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 05/25/2016

Application Dated: 05/25/2016

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032

Power Output listed is conducted. This filing is a modular approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 05/25/2016

Application Dated: 05/25/2016

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032

Power Output listed is conducted. This filing is a modular approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application AA9twK/FkCQUMjnFDzSfwQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 05/25/2011

Application Dated: 05/25/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 05/25/2011

Application Dated: 05/25/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 1lY0wKwFSCdEIUR8Uc4zwA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 05/25/2016

Application Dated: 05/25/2016

Intel Corporation

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.032
38 CC MO	15E	5190.0 - 5230.0	0.03
38 CC MO ND	15E	5260.0 - 5320.0	0.028
38 CC MO ND	15E	5270.0 - 5310.0	0.029
38 CC MO ND	15E	5500.0 - 5700.0	0.033
38 CC MO ND	15E	5510.0 - 5670.0	0.034
49 CC MO ND	15E	5745.0 - 5825.0	0.036
49 CC MO ND	15E	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 05/25/2016

Application Dated: 05/25/2016

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.032
38 CC MO	15E	5190.0 - 5230.0	0.03
38 CC MO ND	15E	5260.0 - 5320.0	0.028
38 CC MO ND	15E	5270.0 - 5310.0	0.029
38 CC MO ND	15E	5500.0 - 5700.0	0.033
38 CC MO ND	15E	5510.0 - 5670.0	0.034
49 CC MO ND	15E	5745.0 - 5825.0	0.036
49 CC MO ND	15E	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49:	The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 1DqAnjbqLa15ueWCnwu+Og==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 03/23/2011

Application Dated: 03/22/2011

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 03/23/2011

Application Dated: 03/22/2011

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Digital Transmission System
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0 - 2462.0	0.117
CC MO	15C	2422.0 - 2452.0	0.032
CC MO	15C	5745.0 - 5825.0	0.036
CC MO	15C	5755.0 - 5795.0	0.12

Power Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0DrFY1xtVxg3OhTcfb1HNg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Intel Mobile Communications

100 Center Point Circle

Suite 200

Columbia, SC 29210

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5230.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Mobile Communications
100 Center Point Circle Suite 200
Columbia, SC 29210
United States

Date of Grant: 09/14/2010

Application Dated: 09/13/2010

Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PD962205ANHU

Name of Grantee:	Intel Mobile Communications

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Centrino Advanced-N 6205
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5230.0	0.032
CC MO	15E	5190.0 - 5230.0	0.03
CC MO ND	15E	5260.0 - 5320.0	0.028
CC MO ND	15E	5270.0 - 5310.0	0.029
CC MO ND	15E	5500.0 - 5700.0	0.033
CC MO ND	15E	5510.0 - 5670.0	0.034

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

Intel Centrino Advanced-N 6205

by Intel Corporation

Grantee Code: PD9 Product Code: 62205ANHU

Latest application date: 2016-05-25

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application YQYg1p2/tZYCMsT63CGhRA==

EAS Grant - Application YQYg1p2/tZYCMsT63CGhRA==

TCB Grant - Application x4HALvGcFfddZyfkSOMMtQ==

EAS Grant - Application x4HALvGcFfddZyfkSOMMtQ==

TCB Grant - Application u2FMMF5rgJw4aA234pf6RA==

EAS Grant - Application u2FMMF5rgJw4aA234pf6RA==

TCB Grant - Application stFP3SJJPflFDz9t9GS5VA==

EAS Grant - Application stFP3SJJPflFDz9t9GS5VA==

TCB Grant - Application PT0wavgMk5Cpy3zASWPXwg==

EAS Grant - Application PT0wavgMk5Cpy3zASWPXwg==

TCB Grant - Application MQ/p0SgPwTw2yoa1Y8xf8g==

EAS Grant - Application MQ/p0SgPwTw2yoa1Y8xf8g==

TCB Grant - Application lT4Dsv2tBNlc0rbz6HsnTQ==

EAS Grant - Application lT4Dsv2tBNlc0rbz6HsnTQ==

TCB Grant - Application IOdf2s3THzC1oAesuswsHw==

EAS Grant - Application IOdf2s3THzC1oAesuswsHw==

TCB Grant - Application hb09AiXfZiHaQQwQzU21AA==

EAS Grant - Application hb09AiXfZiHaQQwQzU21AA==

TCB Grant - Application F9NHPR+d1zMELeUs1SMCUw==

EAS Grant - Application F9NHPR+d1zMELeUs1SMCUw==

TCB Grant - Application DnAAZt+xNZBk48mG4E40dw==

EAS Grant - Application DnAAZt+xNZBk48mG4E40dw==

TCB Grant - Application AA9twK/FkCQUMjnFDzSfwQ==

EAS Grant - Application AA9twK/FkCQUMjnFDzSfwQ==

TCB Grant - Application 1lY0wKwFSCdEIUR8Uc4zwA==

EAS Grant - Application 1lY0wKwFSCdEIUR8Uc4zwA==

TCB Grant - Application 1DqAnjbqLa15ueWCnwu+Og==

EAS Grant - Application 1DqAnjbqLa15ueWCnwu+Og==

TCB Grant - Application 0DrFY1xtVxg3OhTcfb1HNg==

EAS Grant - Application 0DrFY1xtVxg3OhTcfb1HNg==