FCC ID PD962230ANH
Intel Centrino Advanced-N 6230
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 62230ANH
Latest application date: 2012-04-05
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-04-05 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-04-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-04-05 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-07 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-07 |
| 5180-5240 MHz | Original Equipment | 2010-10-21 |
| 2412-2462 MHz | Original Equipment | 2010-10-21 |
| 2402-2480 MHz | Original Equipment | 2010-10-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-06-07 | PDF 223.4 KB |
| User Manual | Users Manual | 2011-04-18 | PDF 223.5 KB |
| Internal Photos | Internal Photos | 2012-04-05 | PDF 891.3 KB |
| Internal Photos | Internal Photos | 2011-04-18 | PDF 1.7 MB |
| External Photos | External Photos | 2012-04-05 | PDF 267.7 KB |
| External Photos | External Photos | 2011-04-18 | PDF 1.7 MB |
| Label and Location | ID Label/Location Info | 2010-10-21 | PDF 288.1 KB |
| Test Setup Photos | Test Setup Photos | 2012-04-05 | PDF 196.1 KB |
| Test Setup Photos | Test Setup Photos | 2011-04-18 | PDF 977 KB |
| Test Setup Photos DFS | Test Setup Photos | 2011-04-18 | PDF 1.4 MB |
| Test Setup Photos NII | Test Setup Photos | 2011-04-18 | PDF 719.9 KB |
| Test Report 1 | Test Report | 2012-04-05 | PDF 4 MB |
| Test Report 2 | Test Report | 2012-04-05 | PDF 3.8 MB |
| Test Report 3 | Test Report | 2012-04-05 | PDF 2.2 MB |
| Test Report DSS | Test Report | 2012-04-05 | PDF 1.4 MB |
| Test Repot DTS | Test Report | 2012-04-05 | PDF 3.5 MB |
| Test Report DFS | Test Report | 2010-10-21 | PDF 292.6 KB |
| Test Report DSS | Test Report | 2010-10-21 | PDF 832.5 KB |
| Test Report DTS | Test Report | 2010-10-21 | PDF 2 MB |
| Test Report JBP | Test Report | 2010-10-21 | PDF 297.6 KB |
| Test Report NII | Test Report | 2010-10-21 | PDF 1.9 MB |
| Attestation Letter Passive Scan | Attestation Statements | 2012-04-05 | PDF 17.8 KB |
| Attestation Letter Passive Scan | Attestation Statements | 2011-06-07 | PDF 16.5 KB |
| Passive Scan Attestation | Attestation Statements | 2010-10-21 | PDF 16.4 KB |
| Authorization Letter | Cover Letter(s) | 2012-04-05 | PDF 21.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2012-04-05 | PDF 19.5 KB |
| Permissive Change Letter | Cover Letter(s) | 2012-04-05 | PDF 16.2 KB |
| Authorization Letter | Cover Letter(s) | 2011-06-07 | PDF 16.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-06-07 | PDF 17.2 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-06-07 | PDF 16 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-06-07 | PDF 16.9 KB |
| Request for supercede | Cover Letter(s) | 2011-06-07 | PDF 22.8 KB |
| supercede request | Cover Letter(s) | 2011-06-07 | PDF 22.8 KB |
| Authorization Letter | Cover Letter(s) | 2010-10-21 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2010-10-21 | PDF 150 KB |
| Cover Letter | Cover Letter(s) | 2010-10-21 | PDF 159.8 KB |
| Modular Approval Letter | Cover Letter(s) | 2010-10-21 | PDF 21.5 KB |
| RF Exposure Info MPE | RF Exposure Info | 2012-04-05 | PDF 74.9 KB |
| RF Exposure MPE | RF Exposure Info | 2012-04-05 | PDF 74.9 KB |
| Rev SAR | RF Exposure Info | 2011-06-07 | PDF 2.1 MB |
| rev SAR report | RF Exposure Info | 2011-06-07 | PDF 2.1 MB |
| RF Exposure MPE | RF Exposure Info | 2010-10-21 | PDF 29.9 KB |
Application Information
| Application ID | rC3irn3FmCaGkLKaUJ38SQ== |
|---|---|
| Final Action Date | 2012-04-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 62230ANH |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Intel Centrino Advanced-N 6230 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| Technical Contact | Sabina Chen, QuieTek Corporation, sabinachen@quietek.com  , 886 2 8601 3788 |
| Test Firm | Vincent Lin, Quietek Corporation, Vincent@quietek.com , 886-2-8601-3788 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 20cm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg. This permissive change is for addition of new antenna, antenna type is different with the original application at 20cm distance. Antenna type: Dipole antenna Air802 Antenna: ANRD245X05-RTP with Amphenol Connector: 901-10097 and Hirose Cable: U.FL-2LP-04N1-A-(100). This antenna is intended for use with stationary desktop systems and not intended for portable conditions subject to SAR evaluation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rC3irn3FmCaGkLKaUJ38SQ== | 2012-04-05 | Class II permissive change or modification of presently authorized equipment |
| jPnCDy/Cd0eY/RqqXZlqCw== | 2012-04-05 | Class II permissive change or modification of presently authorized equipment |
| 3NSDrphO6Vu2tnyhduOUBA== | 2012-04-05 | Class II permissive change or modification of presently authorized equipment |
| SG4xSYnLUiJPaINbTVT/Sg== | 2011-06-07 | Class II permissive change or modification of presently authorized equipment |
| LXVf1RXte4cSdNmvtDQ9JA== | 2011-06-07 | Class II permissive change or modification of presently authorized equipment |
| DEAMyzcjDFUWG/Y6DRxfwA== | 2010-10-21 | Original Equipment |
| BEAb216FSd6p0OTG7rcC1A== | 2010-10-21 | Original Equipment |
| 8e73uFkJxealF6YHhVqnfA== | 2010-10-21 | Original Equipment |
| 4K2+mljVkW2Jc1VVpWzUcQ== | 2010-10-21 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2402-2480 MHz | 0.004 | 15C | CC |
| 2412-2462 MHz | 0.049 | 15C | CC, MO |
| 2412-2462 MHz | 0.038 | 15C | CC, MO |
| 2412-2462 MHz | 0.041 | 15C | CC, MO |
| 2422-2452 MHz | 0.034 | 15C | CC, MO |
| 5180-5240 MHz | 0.045 | 15E | CC, MO |
| 5180-5240 MHz | 0.042 | 15E | CC, MO |
| 5190-5230 MHz | 0.044 | 15E | CC, MO |
| 5260-5320 MHz | 0.046 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.044 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.04 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.045 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.044 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.044 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.0398 | 15C | CC, MO |
| 5745-5825 MHz | 0.04 | 15C | CC, MO |
| 5755-5795 MHz | 0.246 | 15C | CC, MO |
| 5755-5795 MHz | 0.025 | 15C | CC, MO |
Grants
TCB Grant - Application SG4xSYnLUiJPaINbTVT/Sg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/07/2011 Application Dated: 06/07/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application SG4xSYnLUiJPaINbTVT/Sg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/07/2011 Application Dated: 06/07/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 20cm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg. This permissive change is for addition of new antenna, antenna type is different with the original application at 20cm distance. Antenna type: Dipole antenna Air802 Antenna: ANRD245X05-RTP with Amphenol Connector: 901-10097 and Hirose Cable: U.FL-2LP-04N1-A-(100). This antenna is intended for use with stationary desktop systems and not intended for portable conditions subject to SAR evaluation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rC3irn3FmCaGkLKaUJ38SQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 20cm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg. This permissive change is for addition of new antenna, antenna type is different with the original application at 20cm distance. Antenna type: Dipole antenna Air802 Antenna: ANRD245X05-RTP with Amphenol Connector: 901-10097 and Hirose Cable: U.FL-2LP-04N1-A-(100). This antenna is intended for use with stationary desktop systems and not intended for portable conditions subject to SAR evaluation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/07/2011 Application Dated: 06/07/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LXVf1RXte4cSdNmvtDQ9JA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/07/2011 Application Dated: 06/07/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 20cm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg This permissive change is for addition of new antenna, antenna type is different with the original application at 20cm distance. Antenna type: Dipole antenna Air802 Antenna: ANRD245X05-RTP with Amphenol Connector: 901-10097 and Hirose Cable: U.FL-2LP-04N1-A-(100). This antenna is intended for use with stationary desktop systems and not intended for portable conditions subject to SAR evaluation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jPnCDy/Cd0eY/RqqXZlqCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 20cm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg This permissive change is for addition of new antenna, antenna type is different with the original application at 20cm distance. Antenna type: Dipole antenna Air802 Antenna: ANRD245X05-RTP with Amphenol Connector: 901-10097 and Hirose Cable: U.FL-2LP-04N1-A-(100). This antenna is intended for use with stationary desktop systems and not intended for portable conditions subject to SAR evaluation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application DEAMyzcjDFUWG/Y6DRxfwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0398 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application BEAb216FSd6p0OTG7rcC1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0398 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6230 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application 8e73uFkJxealF6YHhVqnfA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4K2+mljVkW2Jc1VVpWzUcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/21/2010 Application Dated: 10/20/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3NSDrphO6Vu2tnyhduOUBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/05/2012 Application Dated: 04/03/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |