FCC ID PD962230ANHU
Intel Centrino Advanced-N 6230
by Intel Mobile Communications
Grantee Code: PD9 Product Code: 62230ANHU
Latest application date: 2012-02-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-14 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-14 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-04-07 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-04-07 |
| 5180-5240 MHz | Original Equipment | 2010-10-25 |
| 2402-2480 MHz | Original Equipment | 2010-10-25 |
| 2412-2462 MHz | Original Equipment | 2010-10-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual 1 | Users Manual | 2012-08-11 | PDF 2.4 MB |
| User Manual 2 | Users Manual | 2012-08-11 | PDF 1.8 MB |
| User Manual 1 | Users Manual | 2011-10-04 | PDF 1.8 MB |
| User Manual 2 | Users Manual | 2011-10-04 | PDF 223.5 KB |
| User Manual | Users Manual | 2011-06-08 | PDF 223.4 KB |
| User Manual | Users Manual | 2011-04-23 | PDF 223.5 KB |
| Internal Photos | Internal Photos | 2011-04-23 | PDF 1.7 MB |
| External Photos | External Photos | 2011-04-23 | PDF 1.7 MB |
| Label and Location | ID Label/Location Info | 2012-02-14 | PDF 323.5 KB |
| Label Drawing | ID Label/Location Info | 2011-04-07 | PDF 284.4 KB |
| Label Location | ID Label/Location Info | 2011-04-07 | PDF 449.8 KB |
| Label and Location | ID Label/Location Info | 2010-10-25 | PDF 284.4 KB |
| Test Setup Photos WNC | Test Setup Photos | 2012-08-11 | PDF 508.7 KB |
| Test Setup Photos Yaego | Test Setup Photos | 2012-08-11 | PDF 509.9 KB |
| Test Setup Photos | Test Setup Photos | 2011-10-04 | PDF 638 KB |
| Test Setup Photos | Test Setup Photos | 2011-04-23 | PDF 977 KB |
| Test Setup Photos | Test Setup Photos | 2011-04-23 | PDF 719.9 KB |
| Test Setup Photos DFS | Test Setup Photos | 2011-04-23 | PDF 1.4 MB |
| Test Report DFS | Test Report | 2010-10-25 | PDF 292.6 KB |
| Test Report DSS | Test Report | 2010-10-25 | PDF 832.5 KB |
| Test Report DTS | Test Report | 2010-10-25 | PDF 2 MB |
| Test Report JBP | Test Report | 2010-10-25 | PDF 297.6 KB |
| Test Report NII | Test Report | 2010-10-25 | PDF 1.9 MB |
| Channel Attestation | Attestation Statements | 2012-02-14 | PDF 17.8 KB |
| Attestation Letter Passive Scan | Attestation Statements | 2011-06-08 | PDF 16.5 KB |
| Channel Attestation Letter | Attestation Statements | 2011-04-07 | PDF 17.8 KB |
| Passive Scan Attestation | Attestation Statements | 2010-10-25 | PDF 16.4 KB |
| Agency Letter | Cover Letter(s) | 2012-02-14 | PDF 16.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2012-02-14 | PDF 20.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2012-02-14 | PDF 16.8 KB |
| Agency Letter | Cover Letter(s) | 2011-06-08 | PDF 16.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-06-08 | PDF 17.2 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-06-08 | PDF 16 KB |
| supercede request | Cover Letter(s) | 2011-06-08 | PDF 22.1 KB |
| Authorization Letter | Cover Letter(s) | 2011-04-07 | PDF 16.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-04-07 | PDF 19.8 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-04-07 | PDF 16.1 KB |
| Authorization Letter | Cover Letter(s) | 2010-10-25 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2010-10-25 | PDF 148.3 KB |
| Cover Letter | Cover Letter(s) | 2010-10-25 | PDF 160.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2010-10-25 | PDF 22.2 KB |
| RF Exposure SAR Report WNC Ant | RF Exposure Info | 2012-02-14 | PDF 1.9 MB |
| RF Exposure SAR Report Yaego Ant | RF Exposure Info | 2012-02-14 | PDF 2 MB |
| Rev SAR report | RF Exposure Info | 2011-06-08 | PDF 2.1 MB |
| Rev SAR reprot | RF Exposure Info | 2011-06-08 | PDF 2.1 MB |
| RF SAR Report | RF Exposure Info | 2011-04-07 | PDF 2.9 MB |
| RF Exposure MPE | RF Exposure Info | 2010-10-25 | PDF 29.9 KB |
Application Information
| Application ID | 4NPZM5ExUQvgRsJbF+QA9g== |
|---|---|
| Final Action Date | 2012-02-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 62230ANHU |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Centrino Advanced-N 6230 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-216-2344 |
| Technical Contact | Ricardo Orejas, AT4 Wireless, rorejas@at4wireless.com  , 34952619317 |
| Test Firm | Juan Carlos Soler Claros, AT4 wireless S.A., jsoler@at4wireless.com , 34-9562-619100 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/11/2012 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 5.9mm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 5.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4NPZM5ExUQvgRsJbF+QA9g== | 2012-02-14 | Class II permissive change or modification of presently authorized equipment |
| 0lBLRCyQRf/TcO1NQkm7nw== | 2012-02-14 | Class II permissive change or modification of presently authorized equipment |
| XkhjJEMllomNJKgjmZhS9w== | 2011-06-08 | Class II permissive change or modification of presently authorized equipment |
| 72GBLvFRO5KbpsFu+w3a6Q== | 2011-06-08 | Class II permissive change or modification of presently authorized equipment |
| ii5M7xmhu6RN7/aePrEe7A== | 2011-04-07 | Class II permissive change or modification of presently authorized equipment |
| Db+sC3Tn48ElyiL01/nZdQ== | 2011-04-07 | Class II permissive change or modification of presently authorized equipment |
| nmh5SWh2wfNOn+UAwELLRg== | 2010-10-25 | Original Equipment |
| N9vvi9rOtRsAwqK2kUG2eg== | 2010-10-25 | Original Equipment |
| 1U1HoyZf4PPE645GJp/N2A== | 2010-10-25 | Original Equipment |
| +zDntiBBzug8Wujf4LdIjA== | 2010-10-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.004 | 15C | CC |
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2412-2462 MHz | 0.049 | 15C | MO |
| 2412-2462 MHz | 0.049 | 15C | CC, MO |
| 2412-2462 MHz | 0.038 | 15C | CC, MO |
| 2412-2462 MHz | 0.041 | 15C | CC, MO |
| 2422-2452 MHz | 0.034 | 15C | CC, MO |
| 5180-5240 MHz | 0.045 | 15E | CC, MO |
| 5180-5240 MHz | 0.042 | 15E | CC, MO |
| 5190-5230 MHz | 0.044 | 15E | CC, MO |
| 5260-5320 MHz | 0.046 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.044 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.04 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.045 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.044 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.044 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.0398 | 15C | CC, MO |
| 5745-5825 MHz | 0.04 | 15C | CC, MO |
| 5755-5795 MHz | 0.246 | 15C | CC, MO |
| 5755-5795 MHz | 0.025 | 15C | CC, MO |
Grants
TCB Grant - Application XkhjJEMllomNJKgjmZhS9w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/08/2011 Application Dated: 06/08/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application XkhjJEMllomNJKgjmZhS9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/08/2011 Application Dated: 06/08/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application nmh5SWh2wfNOn+UAwELLRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6230 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application N9vvi9rOtRsAwqK2kUG2eg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/07/2011 Application Dated: 04/07/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR value is Body: 0.113 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ii5M7xmhu6RN7/aePrEe7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/07/2011 Application Dated: 04/07/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR value is Body: 0.113 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/07/2011 Application Dated: 04/07/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR value is Body: 0.113 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Db+sC3Tn48ElyiL01/nZdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/07/2011 Application Dated: 04/07/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR value is Body: 0.113 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/08/2011 Application Dated: 06/08/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 72GBLvFRO5KbpsFu+w3a6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/08/2011 Application Dated: 06/08/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.383 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/14/2012 Application Dated: 02/13/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 5.9mm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 5.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 4NPZM5ExUQvgRsJbF+QA9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 02/14/2012 Application Dated: 02/13/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.025 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 5.9mm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 5.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1U1HoyZf4PPE645GJp/N2A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/14/2012 Application Dated: 02/13/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 5.9mm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 5.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0lBLRCyQRf/TcO1NQkm7nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 02/14/2012 Application Dated: 02/13/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.042 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.044 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 5.9mm for the host Laptop/Notebook described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 5.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in portable configurations as described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into the host described in this filing may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into the host product. The highest measured body SAR value at 5.9mm antenna-to-user separation distance in the Laptop/Notebook host described in this filing is 1.17W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0398 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +zDntiBBzug8Wujf4LdIjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/25/2010 Application Dated: 10/25/2010 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD962230ANHU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6230 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.038 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0398 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing and the final host device must utilize a Bios Locking features as documented. End users and OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |