FCC ID PD96235ANH
Intel Centrino Advanced-N 6235
by Intel Corporation
Grantee Code: PD9 Product Code: 6235ANH
Latest application date: 2016-05-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-15 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-18 |
| 2402-2480 MHz | Original Equipment | 2011-10-11 |
| 2402-2480 MHz | Original Equipment | 2011-10-11 |
| 5180-5240 MHz | Original Equipment | 2011-10-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manaul | Users Manual | 2016-05-24 | PDF 71.7 KB |
| User Manual 1 | Users Manual | 2013-06-15 | PDF 2.2 MB |
| User Manual 2 | Users Manual | 2013-06-15 | PDF 4.2 MB |
| User Manual | Users Manual | 2013-01-15 | PDF 343.8 KB |
| User Manual | Users Manual | 2012-04-08 | PDF 186.7 KB |
| Internal Photos | Internal Photos | 2012-04-08 | PDF 564.8 KB |
| External Photos | External Photos | 2012-04-08 | PDF 788.8 KB |
| Label and Location | ID Label/Location Info | 2012-12-18 | PDF 319.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-06-15 | PDF 272 KB |
| Test Setup Photos | Test Setup Photos | 2012-04-08 | PDF 977 KB |
| Test Setup Photos | Test Setup Photos | 2012-04-08 | PDF 826.8 KB |
| Test Report DFS | Test Report | 2011-10-11 | PDF 229.2 KB |
| Test Report DSS | Test Report | 2011-10-11 | PDF 594.4 KB |
| Test Report DTS | Test Report | 2011-10-11 | PDF 1.7 MB |
| Test Report JBP | Test Report | 2011-10-11 | PDF 212.7 KB |
| Test Report NII | Test Report | 2011-10-11 | PDF 1.4 MB |
| Hardware Antenna Attestation | Attestation Statements | 2016-05-24 | PDF 265.6 KB |
| Passive Scan Letter | Attestation Statements | 2016-05-24 | PDF 17.9 KB |
| Attestation Statement | Attestation Statements | 2013-01-15 | PDF 22 KB |
| Passive Scan Attestation Letter | Attestation Statements | 2013-01-15 | PDF 79.5 KB |
| Attestation Letter Passive Scan | Attestation Statements | 2012-12-20 | PDF 79.5 KB |
| Attestation Statement | Cover Letter(s) | 2012-12-20 | PDF 22 KB |
| Modular Approval Letter | Cover Letter(s) | 2011-10-11 | PDF 16.6 KB |
| Passive Scan Attestation | Attestation Statements | 2011-10-11 | PDF 17.8 KB |
| request for error correction | Attestation Statements | 2011-10-11 | PDF 94.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2016-05-24 | PDF 255.6 KB |
| Software Security Letter | Cover Letter(s) | 2016-05-24 | PDF 457.7 KB |
| Agency Letter | Cover Letter(s) | 2013-01-15 | PDF 16.5 KB |
| Authorization Letter | Cover Letter(s) | 2013-01-15 | PDF 16.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-01-15 | PDF 17.2 KB |
| Permissive Change Letter | Cover Letter(s) | 2013-01-15 | PDF 16.1 KB |
| Agency Letter | Cover Letter(s) | 2012-12-18 | PDF 16.6 KB |
| Authorization Letter | Cover Letter(s) | 2012-12-18 | PDF 16.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2012-12-18 | PDF 18 KB |
| Permissive Change Letter | Cover Letter(s) | 2012-12-18 | PDF 16.3 KB |
| Authorization Letter | Cover Letter(s) | 2011-10-11 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-10-11 | PDF 20.2 KB |
| Cover Letter | Cover Letter(s) | 2011-10-11 | PDF 27.4 KB |
| RF Exposure SAR Report | RF Exposure Info | 2013-01-15 | PDF 2.6 MB |
| RF Exposure SAR Report Rev B | RF Exposure Info | 2012-12-20 | PDF 2.5 MB |
| RF Exposure SAR Report | RF Exposure Info | 2012-12-18 | PDF 2.4 MB |
| RF Exposure Info MPE | RF Exposure Info | 2011-10-11 | PDF 59.9 KB |
| RF Exposure SAR | RF Exposure Info | 2011-10-11 | PDF 2.6 MB |
Application Information
| Application ID | r170nCqBT+iD3IiadIlDJw== |
|---|---|
| Final Action Date | 2016-05-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 6235ANH |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Centrino Advanced-N 6235 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Technical Contact | Steven Hackett, Intel Mobile Communications, Steven.C.Hackett@Intel.com , 8032162344 |
| Test Firm | David Bare, National Technical Systems, david.bare@nts.com  , 510-578-3500 |
| TCB Email | Hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| r170nCqBT+iD3IiadIlDJw== | 2016-05-24 | Class II permissive change or modification of presently authorized equipment |
| BaQHmoTvECa586csYUvFUw== | 2016-05-24 | Class II permissive change or modification of presently authorized equipment |
| GaT8woJMraL/3kqYgp1nMg== | 2013-01-15 | Class II permissive change or modification of presently authorized equipment |
| 5FmhEDaoEfFUwhsmLiJ2PQ== | 2013-01-15 | Class II permissive change or modification of presently authorized equipment |
| H/cZURoyALN0OqQcOt/YRA== | 2012-12-20 | Class II permissive change or modification of presently authorized equipment |
| FYcYr66u9fKAaC5sBtczwA== | 2012-12-20 | Class II permissive change or modification of presently authorized equipment |
| ZRzJcoI14vFjwhoF9D219Q== | 2012-12-18 | Class II permissive change or modification of presently authorized equipment |
| V0g//A7T4B6bohRMyO62BA== | 2012-12-18 | Class II permissive change or modification of presently authorized equipment |
| 1E7XsxLKIhreY1fLYMeQIg== | 2012-12-18 | Class II permissive change or modification of presently authorized equipment |
| ivxuCawToDSQorpIAUdU/Q== | 2011-10-11 | Original Equipment |
| fI+qC1H0YhdQcngQmzrdIw== | 2011-10-11 | Original Equipment |
| SkmjZdxAvyyXEtHl9uR4yg== | 2011-10-11 | Original Equipment |
| +v7wukxxGCn+qom/wRZGqg== | 2011-10-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0048 | 15C | CC |
| 2402-2480 MHz | 0.0040000 | 15C | CC |
| 2412-2462 MHz | 0.049 | 15C | CC, MO |
| 2422-2452 MHz | 0.034 | 15C | CC, MO |
| 5180-5240 MHz | 0.045 | 15E | 38, CC, MO |
| 5180-5240 MHz | 0.045 | 15E | CC, MO |
| 5190-5230 MHz | 0.044 | 15E | 38, CC, MO |
| 5190-5230 MHz | 0.044 | 15E | CC, MO |
| 5260-5320 MHz | 0.046 | 15E | 38, CC, MO, ND |
| 5260-5320 MHz | 0.046 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.04 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.04 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.045 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.045 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.044 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.044 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.04 | 15C | CC, MO |
| 5745-5825 MHz | 0.04 | 15E | 49, CC, MO, ND |
| 5755-5795 MHz | 0.246 | 15C | CC, MO |
| 5755-5795 MHz | 0.246 | 15E | 49, CC, MO, ND |
Grants
TCB Grant - Application ZRzJcoI14vFjwhoF9D219Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance for the platform specified in this filing is: 1.21 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ZRzJcoI14vFjwhoF9D219Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance for the platform specified in this filing is: 1.21 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application V0g//A7T4B6bohRMyO62BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SkmjZdxAvyyXEtHl9uR4yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/24/2016 Application Dated: 05/24/2016 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0048 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application r170nCqBT+iD3IiadIlDJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/24/2016 Application Dated: 05/24/2016 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0048 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ivxuCawToDSQorpIAUdU/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/20/2012 Application Dated: 12/20/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application H/cZURoyALN0OqQcOt/YRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/20/2012 Application Dated: 12/20/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/15/2013 Application Dated: 01/11/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application GaT8woJMraL/3kqYgp1nMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/15/2013 Application Dated: 01/11/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/20/2012 Application Dated: 12/20/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.56 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application FYcYr66u9fKAaC5sBtczwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/20/2012 Application Dated: 12/20/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.56 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fI+qC1H0YhdQcngQmzrdIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/24/2016 Application Dated: 05/24/2016 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.04 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application BaQHmoTvECa586csYUvFUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/24/2016 Application Dated: 05/24/2016 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.04 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.246 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/15/2013 Application Dated: 01/11/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5FmhEDaoEfFUwhsmLiJ2PQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/15/2013 Application Dated: 01/11/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance for the platform specified in this filing is: 0.99 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1E7XsxLKIhreY1fLYMeQIg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2012 Application Dated: 12/17/2012 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.049 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.04 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.246 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0048 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance for the platform specified in this filing is: 0.99 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +v7wukxxGCn+qom/wRZGqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/11/2011 Application Dated: 10/11/2011 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD96235ANH |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Centrino Advanced-N 6235 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.044 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.046 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.04 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.045 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.044 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |