FCC ID PD97260HU
Model 7260HMW Wireless Network Adapter
by Intel Corporation
Grantee Code: PD9 Product Code: 7260HU
Latest application date: 2016-05-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-14 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-03-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-11-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-11-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-11-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-04-29 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-04-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-04-29 |
| 2402-2480 MHz | Original Equipment | 2013-04-04 |
| 5180-5240 MHz | Original Equipment | 2013-04-04 |
| 2402-2480 MHz | Original Equipment | 2013-04-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manaul | Users Manual | 2016-05-09 | PDF 612.7 KB |
| User Manual | Users Manual | 2014-09-06 | PDF 1.8 MB |
| User Manual | Users Manual | 2014-03-02 | PDF 1.6 MB |
| User Manual 1 | Users Manual | 2014-02-23 | PDF 4.2 MB |
| User Manual 2 | Users Manual | 2014-02-23 | PDF 2.6 MB |
| User Manuau 1 | Users Manual | 2014-02-23 | PDF 4.2 MB |
| User Manual | Users Manual | 2013-09-29 | PDF 356.8 KB |
| Internal Photos | Internal Photos | 2013-11-27 | PDF 115.5 KB |
| Internal Photos | Internal Photos | 2013-09-29 | PDF 41.9 KB |
| External Photos | External Photos | 2013-11-27 | PDF 101.3 KB |
| External Photos | External Photos | 2013-09-29 | PDF 261.8 KB |
| Label and Location | ID Label/Location Info | 2014-03-14 | PDF 62.6 KB |
| Label and Location | ID Label/Location Info | 2013-08-27 | PDF 119.7 KB |
| Label and Location | ID Label/Location Info | 2013-04-04 | PDF 640.9 KB |
| Test Setup Photos SAR | Test Setup Photos | 2014-09-06 | PDF 811.8 KB |
| Test Setup Photos | Test Setup Photos | 2014-05-25 | PDF 227.4 KB |
| Test Setup Photos SAR Rev | Test Setup Photos | 2014-03-02 | PDF 2.2 MB |
| Test Setup Photos | Test Setup Photos | 2014-02-23 | PDF 654.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-09-29 | PDF 3.8 MB |
| Test Setup Photos DSS | Test Setup Photos | 2013-09-29 | PDF 2.3 MB |
| Test Setup Photos DTS | Test Setup Photos | 2013-09-29 | PDF 2.3 MB |
| Test Setup Photos NII | Test Setup Photos | 2013-09-29 | PDF 2.3 MB |
| Test Setup Photos SAR | Test Setup Photos | 2013-09-29 | PDF 393.4 KB |
| Test Report DTS LE BT | Test Report | 2013-11-27 | PDF 1,007.2 KB |
| Test Repot DTS | Test Report | 2013-11-27 | PDF 3.1 MB |
| Test Repot NII | Test Report | 2013-11-27 | PDF 5.2 MB |
| Test Report DSS | Test Report | 2013-04-04 | PDF 884.9 KB |
| Test Report DTS | Test Report | 2013-04-04 | PDF 4.8 MB |
| Test Report JBP | Test Report | 2013-04-04 | PDF 764.6 KB |
| Test Report NII | Test Report | 2013-04-04 | PDF 5.9 MB |
| Hardware Antenna Attestation | Attestation Statements | 2016-05-09 | PDF 149.7 KB |
| Hardware Antenna Attestation | Cover Letter(s) | 2016-05-09 | PDF 149.7 KB |
| Passive Scan Letter | Attestation Statements | 2016-05-09 | PDF 18.4 KB |
| Software Security Description | Attestation Statements | 2016-05-09 | PDF 216.2 KB |
| Passive Scan Attestation Letter | Attestation Statements | 2014-03-14 | PDF 23.6 KB |
| Attestation Letter Passive Scan | Attestation Statements | 2013-11-27 | PDF 18.1 KB |
| Attestation Passive Scan DFS | Attestation Statements | 2013-09-04 | PDF 23.6 KB |
| Attestation Passive Scan Letter | Attestation Statements | 2013-08-27 | PDF 23.6 KB |
| Attestation Letter Passive Scan | Attestation Statements | 2013-04-29 | PDF 18.3 KB |
| Attestation Statement | Attestation Statements | 2013-04-29 | PDF 89.5 KB |
| FCC ID Differences Attestation | Attestation Statements | 2013-04-04 | PDF 16.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2013-04-04 | PDF 16.9 KB |
| Passive Scan Letter | Cover Letter(s) | 2013-04-04 | PDF 18.3 KB |
| Tune Up Attestation | Attestation Statements | 2013-04-04 | PDF 15.6 KB |
| Permissive Change Letter | Cover Letter(s) | 2016-05-09 | PDF 139.5 KB |
| Software Security Letter | Cover Letter(s) | 2016-05-09 | PDF 216.2 KB |
| Authorization Letter | Cover Letter(s) | 2014-03-14 | PDF 16.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-03-14 | PDF 24.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2014-03-14 | PDF 21.6 KB |
| Agency Letter | Cover Letter(s) | 2013-11-27 | PDF 16.3 KB |
| Authorization Letter | Cover Letter(s) | 2013-11-27 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-11-27 | PDF 17 KB |
| Permissive Change Letter | Cover Letter(s) | 2013-11-27 | PDF 16.2 KB |
| Authorization Letter | Cover Letter(s) | 2013-09-04 | PDF 21.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-09-04 | PDF 24.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2013-09-04 | PDF 21.6 KB |
| Agency Letter | Cover Letter(s) | 2013-08-27 | PDF 21.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-08-27 | PDF 24.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2013-08-27 | PDF 21.5 KB |
| Agency Letter | Cover Letter(s) | 2013-04-29 | PDF 16.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-04-29 | PDF 17.4 KB |
| Permissive Change Letter | Cover Letter(s) | 2013-04-29 | PDF 16.1 KB |
| Authorization Letter | Cover Letter(s) | 2013-04-04 | PDF 16.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-04-04 | PDF 19.1 KB |
| Confidentiality Letter Rev | Cover Letter(s) | 2013-04-04 | PDF 19.3 KB |
| RF Exposure SAR Report | RF Exposure Info | 2014-03-14 | PDF 3.7 MB |
| RF Exposure Info MPE | RF Exposure Info | 2013-11-27 | PDF 37.1 KB |
| RF Exposure MPE Report | RF Exposure Info | 2013-11-27 | PDF 37.1 KB |
| RF Exposure SAR Report Rev 2 | RF Exposure Info | 2013-09-04 | PDF 2.5 MB |
| RF Exposure SAR Report | RF Exposure Info | 2013-08-27 | PDF 3.2 MB |
| RF Exposure SAR Report | RF Exposure Info | 2013-04-29 | PDF 2.4 MB |
| RF Exposure MPE | RF Exposure Info | 2013-04-04 | PDF 114.1 KB |
| RF Exposure SAR Report | RF Exposure Info | 2013-04-04 | PDF 2.2 MB |
| Description Antenna Luxshare-ict Metadata only | Operational Description | PDF 5.3 MB | |
| Description Antenna Yageo Metadata only | Operational Description | PDF 2.7 MB | |
| Description BIOS Lock Metadata only | Operational Description | PDF 77.3 KB |
Application Information
| Application ID | W9P2XoLw5WwVh87AbDCF7Q== |
|---|---|
| Final Action Date | 2016-05-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 7260HU |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Model 7260HMW Wireless Network Adapter |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Technical Contact | Steven Hackett, Intel Mobile Communications, Steven.C.Hackett@Intel.com , 8032162344 |
| Test Firm | Rafael Lopez Martin, DEKRA Testing and Certification, S.A.U., rafael.lopez@dekra.com  , 34-9562-61 91 00 |
| TCB Email | Hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| W9P2XoLw5WwVh87AbDCF7Q== | 2016-05-09 | Class II permissive change or modification of presently authorized equipment |
| SYfrdK9kjLGHLwCQRuh6Xg== | 2016-05-09 | Class II permissive change or modification of presently authorized equipment |
| xv7MIcRJeM/zoXIh9XMtfQ== | 2014-03-14 | Class II permissive change or modification of presently authorized equipment |
| r5ZxT3qSzHT6GFDeSFcGUA== | 2014-03-14 | Class II permissive change or modification of presently authorized equipment |
| 0jss0vrKJ1IqzWjdyXwFAA== | 2014-03-14 | Class II permissive change or modification of presently authorized equipment |
| g46/S45rLKPkY3veAlMkPQ== | 2013-11-27 | Class II permissive change or modification of presently authorized equipment |
| bU95haP7N3zuwoU0dKytZQ== | 2013-11-27 | Class II permissive change or modification of presently authorized equipment |
| WXG+sPdTvs0yh6wWDfW1Iw== | 2013-11-27 | Class II permissive change or modification of presently authorized equipment |
| crLDmPG/QCX+2E5c8RjUqA== | 2013-09-04 | Class II permissive change or modification of presently authorized equipment |
| HzH6rGmXCGB7PHdwshpX9w== | 2013-09-04 | Class II permissive change or modification of presently authorized equipment |
| 49BWe/LjDvTPaL0Hia37kg== | 2013-09-04 | Class II permissive change or modification of presently authorized equipment |
| hWg2xFYEtCIQSnNN9fdE+g== | 2013-08-27 | Class II permissive change or modification of presently authorized equipment |
| bCV0hseA2f7TNZHHPaQHaQ== | 2013-08-27 | Class II permissive change or modification of presently authorized equipment |
| 7Qk3aGA+LIldzn+f9d9xtA== | 2013-08-27 | Class II permissive change or modification of presently authorized equipment |
| Z9PMKQUc6OL/VMymABKTsg== | 2013-04-29 | Class II permissive change or modification of presently authorized equipment |
| CTPaYUhxr86gpt+na59Ttg== | 2013-04-29 | Class II permissive change or modification of presently authorized equipment |
| 6KU9a/fptFg/W/sIOc2V3A== | 2013-04-29 | Class II permissive change or modification of presently authorized equipment |
| phM4jozwDBgN7R/dMkomhg== | 2013-04-04 | Original Equipment |
| fXwdsanEac3bqYXxFPohwg== | 2013-04-04 | Original Equipment |
| el9zM1s1uegnQlQPXNbMkA== | 2013-04-04 | Original Equipment |
| GxBmJGy+xJreThBix+hAhQ== | 2013-04-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2402-2480 MHz | 0.0030000 | 15C | CC |
| 2412-2462 MHz | 0.397 | 15C | CC, MO |
| 2422-2452 MHz | 0.476 | 15C | CC, MO |
| 5180-5240 MHz | 0.033 | 15E | CC, MO |
| 5190-5230 MHz | 0.037 | 15E | CC, MO |
| 5190-5230 MHz | 0.037 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.041 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.041 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.053 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.053 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.047 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.047 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.047 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.047 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.047 | 15E | CC, M4, MO |
| 5710 MHz | 0.045 | 15E | CC, MO, ND |
| 5710 MHz | 0.045 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.045 | 15E | CC, MO, ND |
| 5720 MHz | 0.045 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.486 | 15C | CC, MO |
| 5745-5825 MHz | 0.486 | 15E | 49, CC, MO, ND |
| 5755-5795 MHz | 0.523 | 15E | 49, CC, MO, ND |
| 5755-5795 MHz | 0.523 | 15C | CC, MO |
| 5775 MHz | 0.505 | 15E | 49, CC, MO, ND |
Grants
TCB Grant - Application Z9PMKQUc6OL/VMymABKTsg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Z9PMKQUc6OL/VMymABKTsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/14/2014 Application Dated: 03/07/2014 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.53 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xv7MIcRJeM/zoXIh9XMtfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/14/2014 Application Dated: 03/07/2014 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.53 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC M4 MO | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations only. Those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change #1: Addition of new dipole type antenna, Whayu, part no. C642-510049-A. This antenna will be restricted to mobile category computers and stationary desktop computers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| M4: | Operation of this unit is limited to use at stations licensed for use under Part 74 of FCC Rules. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WXG+sPdTvs0yh6wWDfW1Iw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC M4 MO | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations only. Those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change #1: Addition of new dipole type antenna, Whayu, part no. C642-510049-A. This antenna will be restricted to mobile category computers and stationary desktop computers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| M4: | Operation of this unit is limited to use at stations licensed for use under Part 74 of FCC Rules. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/09/2016 Application Dated: 05/06/2016 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application W9P2XoLw5WwVh87AbDCF7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/09/2016 Application Dated: 05/06/2016 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 | ||
| 49 CC MO ND | 15E | 5745.0 - 5825.0 | 0.486 | ||
| 49 CC MO ND | 15E | 5755.0 - 5795.0 | 0.523 | ||
| 49 CC MO ND | 15E | 5775.0 - 5775.0 | 0.505 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/09/2016 Application Dated: 05/09/2016 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band from the grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SYfrdK9kjLGHLwCQRuh6Xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/09/2016 Application Dated: 05/09/2016 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band from the grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/14/2014 Application Dated: 03/10/2014 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.49W/kg. Simultaneous TX: 1.53W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo Yoga 2 11, with antenna Yageo part no. ANTA0LL08141WLAN1 and ANTA0LL08141WLAN2 and Luxshare part no. LA22RF742-1H and LA22RF743-1H. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application r5ZxT3qSzHT6GFDeSFcGUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/14/2014 Application Dated: 03/10/2014 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.49W/kg. Simultaneous TX: 1.53W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo Yoga 2 11, with antenna Yageo part no. ANTA0LL08141WLAN1 and ANTA0LL08141WLAN2 and Luxshare part no. LA22RF742-1H and LA22RF743-1H. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application phM4jozwDBgN7R/dMkomhg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.15 W/kg. Simultaneous TX: 1.68W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo TP00062A PC, with antenna Jess- Link part no. PANT13A00002-1 (Tx1) and PANT13A00002-3 (Tx2) and High-Tek part no. 0ACCN013004N (Tx1) and 0ACCN013005N (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application HzH6rGmXCGB7PHdwshpX9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.15 W/kg. Simultaneous TX: 1.68W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo TP00062A PC, with antenna Jess- Link part no. PANT13A00002-1 (Tx1) and PANT13A00002-3 (Tx2) and High-Tek part no. 0ACCN013004N (Tx1) and 0ACCN013005N (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.24W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hWg2xFYEtCIQSnNN9fdE+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.24W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.73 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GxBmJGy+xJreThBix+hAhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.73 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations only. Those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change #1: Addition of new dipole type antenna, Whayu, part no. C642-510049-A. This antenna will be restricted to mobile category computers and stationary desktop computers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application g46/S45rLKPkY3veAlMkPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations only. Those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change #1: Addition of new dipole type antenna, Whayu, part no. C642-510049-A. This antenna will be restricted to mobile category computers and stationary desktop computers. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX:1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fXwdsanEac3bqYXxFPohwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX:1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application el9zM1s1uegnQlQPXNbMkA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/04/2013 Application Dated: 04/02/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application CTPaYUhxr86gpt+na59Ttg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.0mm antenna-to-user separation distance in this Tablet Computer host is: 0.74 W/kg. Simultaneous TX: 1.27W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo TP00062A PC, with antenna Jess-Link part no. PANT13A00002-1 (Tx1) and PANT13A00002-3 (Tx2) and High-Tek part no. 0ACCN013004N (Tx1) and 0ACCN013005N (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application crLDmPG/QCX+2E5c8RjUqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.0mm antenna-to-user separation distance in this Tablet Computer host is: 0.74 W/kg. Simultaneous TX: 1.27W/kg. This change is to request approval for portable category specific host tablet PC, model number: Lenovo TP00062A PC, with antenna Jess-Link part no. PANT13A00002-1 (Tx1) and PANT13A00002-3 (Tx2) and High-Tek part no. 0ACCN013004N (Tx1) and 0ACCN013005N (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets the SAR threshold exclusion set forth in KDB447498 and therefore can be used in mobile/portable configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bU95haP7N3zuwoU0dKytZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 11/27/2013 Application Dated: 11/26/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets the SAR threshold exclusion set forth in KDB447498 and therefore can be used in mobile/portable configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.23mm antenna-to-user separation distance in this Tablet Computer host is: 1.38 W/kg. Simultaneous TX: 1.88W/kg. This change is to request approval for portable category specific host tablet PC, model number: Dell W01A001, with antenna Wanshih Electric Co.,LTD part number UC1WFI0108 (Tx1), UC1WFI0109 (Tx2) and Whayu, part number C1335-520243-A (Tx1), C1335-520244-A (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application bCV0hseA2f7TNZHHPaQHaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.033 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.037 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.041 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.053 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.047 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.045 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.045 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.047 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.23mm antenna-to-user separation distance in this Tablet Computer host is: 1.38 W/kg. Simultaneous TX: 1.88W/kg. This change is to request approval for portable category specific host tablet PC, model number: Dell W01A001, with antenna Wanshih Electric Co.,LTD part number UC1WFI0108 (Tx1), UC1WFI0109 (Tx2) and Whayu, part number C1335-520243-A (Tx1), C1335-520244-A (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.23mm antenna-to-user separation distance in this Tablet Computer host is: 0.74 W/kg. Simultaneous TX: 1.24W/kg. This change is to request approval for portable category specific host tablet PC, model number: Dell W01A001, with antenna Wanshih Electric Co.,LTD part number UC1WFI0108 (Tx1), UC1WFI0109 (Tx2) and Whayu, part number C1335-520243-A (Tx1), C1335-520244-A (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7Qk3aGA+LIldzn+f9d9xtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/27/2013 Application Dated: 08/27/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Digital Transmission System |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.397 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.476 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.486 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.523 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the bios locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 4.23mm antenna-to-user separation distance in this Tablet Computer host is: 0.74 W/kg. Simultaneous TX: 1.24W/kg. This change is to request approval for portable category specific host tablet PC, model number: Dell W01A001, with antenna Wanshih Electric Co.,LTD part number UC1WFI0108 (Tx1), UC1WFI0109 (Tx2) and Whayu, part number C1335-520243-A (Tx1), C1335-520244-A (Tx2). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6KU9a/fptFg/W/sIOc2V3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/29/2013 Application Dated: 04/29/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.06W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Intel Mobile Communications |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets the SAR threshold exclusion set forth in KDB447498 and therefore can be used in mobile/portable configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 49BWe/LjDvTPaL0Hia37kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Mobile Communications 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/04/2013 Application Dated: 09/03/2013 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD97260HU |
| Name of Grantee: | Intel Mobile Communications |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Model 7260HMW Wireless Network Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets the SAR threshold exclusion set forth in KDB447498 and therefore can be used in mobile/portable configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |