FCC ID PD99462D2
Intel Dual Band Wireless-AC 9462
by Intel Corporation
Grantee Code: PD9 Product Code: 9462D2
Latest application date: 2018-07-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-18 |
| 2402-2480 MHz | Original Equipment | 2017-12-18 |
| 5180-5240 MHz | Original Equipment | 2017-12-18 |
| 2402-2480 MHz | Original Equipment | 2017-12-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-06-16 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2018-06-16 | PDF 102 KB |
| Internal Photos | Internal Photos | 2018-06-15 | PDF 65.3 KB |
| External Photos | External Photos | 2018-06-16 | PDF 611.2 KB |
| External Photos | External Photos | 2018-06-15 | PDF 53.8 KB |
| Labels and Locations | ID Label/Location Info | 2018-07-18 | PDF 1.2 MB |
| Label and Location | ID Label/Location Info | 2017-12-18 | PDF 75.1 KB |
| Labels and Locations | ID Label/Location Info | 2017-12-18 | PDF 64.4 KB |
| Test Setup Photos | Test Setup Photos | 2018-07-18 | PDF 768.8 KB |
| Test Setup Photos | Test Setup Photos | 2018-06-16 | PDF 324.8 KB |
| Test Setup Photos | Test Setup Photos | 2018-06-15 | PDF 402.2 KB |
| Test Setup Photos | Test Setup Photos | 2018-06-15 | PDF 713.9 KB |
| Test Report BLE | Test Report | 2018-07-18 | PDF 1.1 MB |
| Test Report DSS | Test Report | 2018-07-18 | PDF 2 MB |
| Test Report DTS | Test Report | 2018-07-18 | PDF 4 MB |
| Test Report UNII 1 | Test Report | 2018-07-18 | PDF 4.6 MB |
| Test Report UNII 2 | Test Report | 2018-07-18 | PDF 3.3 MB |
| Test Report DFS | Test Report | 2017-12-18 | PDF 545.6 KB |
| Test Report DSS | Test Report | 2017-12-18 | PDF 4.3 MB |
| Test Report DTS Part 1 | Test Report | 2017-12-18 | PDF 4 MB |
| Test Report DTS Part 2 | Test Report | 2017-12-18 | PDF 2.2 MB |
| Test Report JBP | Test Report | 2017-12-18 | PDF 1.6 MB |
| Test Report NII 1 | Test Report | 2017-12-18 | PDF 2.8 MB |
| Test Report NII 2 | Test Report | 2017-12-18 | PDF 2 MB |
| Test Report NII 3 | Test Report | 2017-12-18 | PDF 2.1 MB |
| Frequency Attestation | Attestation Statements | 2018-07-18 | PDF 238 KB |
| Passive Scan Attestation | Attestation Statements | 2018-07-18 | PDF 61.4 KB |
| Authorization Letter | Cover Letter(s) | 2018-07-18 | PDF 139.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-07-18 | PDF 171.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2018-07-18 | PDF 44.2 KB |
| Software Security Letter | Cover Letter(s) | 2018-07-18 | PDF 313.2 KB |
| Cofidentiality Letter | Cover Letter(s) | 2017-12-18 | PDF 42.5 KB |
| Cofidentiality Letter | Cover Letter(s) | 2017-12-18 | PDF 85.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-12-18 | PDF 77.2 KB |
| Software Security Letter | Cover Letter(s) | 2017-12-18 | PDF 236.8 KB |
| RF Exposure Info MPE | RF Exposure Info | 2018-07-18 | PDF 175.8 KB |
| RF Exposure SAR Report | RF Exposure Info | 2017-12-18 | PDF 3.5 MB |
| Block Diagram Metadata only | Block Diagram | PDF 90.1 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 226.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| Schematics Metadata only | Schematics | PDF 1.9 MB | |
| Description Antenna SkyCross Metadata only | Operational Description | PDF 718 KB | |
| Description BLE Metadata only | Operational Description | PDF 40.2 KB | |
| Description Bluetooth Metadata only | Operational Description | PDF 40.1 KB | |
| Description FHSS Metadata only | Operational Description | PDF 77 KB | |
| Description Hardware Metadata only | Operational Description | PDF 5.2 MB | |
| Description Hardware Metadata only | Operational Description | PDF 5.2 MB | |
| Description UNII Metadata only | Operational Description | PDF 149.5 KB | |
| Description WLAN Metadata only | Operational Description | PDF 146 KB |
Application Information
| Application ID | ocf4icyIaS7Cc43wWQZf6Q== |
|---|---|
| Final Action Date | 2018-07-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | 9462D2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Dual Band Wireless-AC 9462 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Agent | Steven Steven Steven, Intel Mobile Communications, hotline@acbcert.com  , +1803156704 |
| Technical Contact | Steven Hackett, Intel Mobile Communications, steven.c.hackett@Intel.com , +1803156704 |
| Test Firm | Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962 |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ocf4icyIaS7Cc43wWQZf6Q== | 2018-07-18 | Class II permissive change or modification of presently authorized equipment |
| S+7rdO3yU/xI33uuX8kOwQ== | 2018-07-18 | Class II permissive change or modification of presently authorized equipment |
| RSgNZTPyskHFI1FYJ6xSbQ== | 2018-07-18 | Class II permissive change or modification of presently authorized equipment |
| KG3K9GSxBNQ2WqpVCWzdZw== | 2017-12-18 | Original Equipment |
| FdM0PvkusH0djeUQkgQLUw== | 2017-12-18 | Original Equipment |
| 9E7iG/JOwA5s5kfqO8D7EQ== | 2017-12-18 | Original Equipment |
| 7nUut0JOeM0p1L6NC9Mm9Q== | 2017-12-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.008 | 15C | CC |
| 2402-2480 MHz | 0.0100000 | 15C | CC |
| 2412-2472 MHz | 0.637 | 15C | CC, MO |
| 2422-2462 MHz | 0.238 | 15C | CC, MO |
| 5190-5230 MHz | 0.093 | 15E | 38, CC, MO |
| 5210 MHz | 0.032 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.142 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.082 | 15E | 38, CC, MO, ND |
| 5290 MHz | 0.043 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.134 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.138 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.091 | 15E | 38, CC, MO, ND |
| 5710 MHz | 0.09 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.082 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.143 | 15E | 38, CC, MO |
| 5755-5795 MHz | 0.145 | 15E | 38, CC, MO |
| 5775 MHz | 0.03 | 15E | 38, CC, MO |
Grants
TCB Grant - Application S+7rdO3yU/xI33uuX8kOwQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S+7rdO3yU/xI33uuX8kOwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application RSgNZTPyskHFI1FYJ6xSbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ocf4icyIaS7Cc43wWQZf6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 07/18/2018 Application Dated: 07/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna, all other hardware is identical with original granted. Antenna is of the same type and lower gain from original approval. RF calculations were done to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application KG3K9GSxBNQ2WqpVCWzdZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FdM0PvkusH0djeUQkgQLUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 9E7iG/JOwA5s5kfqO8D7EQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7nUut0JOeM0p1L6NC9Mm9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/18/2017 Application Dated: 12/18/2017 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD99462D2 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |