FCC ID PD9AP2011BWLAN
WLAN PC Card
by Intel Corporation
Grantee Code: PD9 Product Code: AP2011BWLAN
Latest application date: 2001-10-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2001-10-19 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: H9PLA4131M Grant Date: 07/25/2001 | 2001-08-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2001-10-19 | PDF 601.2 KB |
| External Photos | External Photos | 2001-08-27 | PDF 332.7 KB |
| FCC ID Label | ID Label/Location Info | 2001-10-19 | PDF 523.9 KB |
| FCC ID label format and location | ID Label/Location Info | 2001-08-27 | PDF 568.8 KB |
| Antenna Information | Operational Description | 2001-10-19 | PDF 46.6 KB |
| Test Setup Photos | Test Setup Photos | 2001-10-19 | PDF 221 KB |
| Radiated Spurious Emissions Test Data | Test Report | 2001-10-19 | PDF 117.8 KB |
| Technical Report | Test Report | 2001-10-19 | PDF 175.5 KB |
| Attestation Letter from Applicant | Attestation Statements | 2001-10-19 | PDF 93.2 KB |
| Agent Authorization Letter | Cover Letter(s) | 2001-10-19 | PDF 93.3 KB |
| Cover Letter from Agent | Cover Letter(s) | 2001-10-19 | PDF 73.6 KB |
| Index of Exhibits | Cover Letter(s) | 2001-10-19 | PDF 34.4 KB |
| Intel Change of Identification Request for Original Grant of August 27 2001 | Cover Letter(s) | 2001-10-19 | PDF 21.2 KB |
| Symbol Authorization Letter for Change of Identification | Cover Letter(s) | 2001-10-19 | PDF 28.4 KB |
| Authorization letter | Cover Letter(s) | 2001-08-27 | PDF 23 KB |
| Request letter | Cover Letter(s) | 2001-08-27 | PDF 12.8 KB |
Application Information
| Application ID | CH6ov3ZChJvGfaSdTxbHTQ== |
|---|---|
| Final Action Date | 2001-10-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | AP2011BWLAN |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN PC Card |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Agent | Greg Greg Greg, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| Technical Contact | Greg V Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| Non-Technical Contact | Vicki L Albertson, Northwest EMC, Inc., valbertson@nwemc.com , 503-844-4066 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| TCB Email | gkiemel@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Grant Condition: Output is peak conducted. The previous grant for this device authorized 5 antenna configurations. This grant is for a sixth antenna. All six antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time averaging duty factor not exceeding 71.8%. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| CH6ov3ZChJvGfaSdTxbHTQ== | 2001-10-19 | Class II permissive change or modification of presently authorized equipment |
| mV2TeyAetM1+Wgb/3TU5GA== | 2001-08-27 | Change in identification of presently authorized equipment. Original FCC ID: H9PLA4131M Grant Date: 07/25/2001 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0600000 | 15C |
Grants
TCB Grant - Application mV2TeyAetM1+Wgb/3TU5GA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/27/2001 Application Dated: 08/27/2001 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AP2011BWLAN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Condition:Output is peak conducted. This device has five antenna configurations, as described in the filing. All five antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 71.8%. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application mV2TeyAetM1+Wgb/3TU5GA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/27/2001 Application Dated: 08/27/2001 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AP2011BWLAN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Condition:Output is peak conducted. This device has five antenna configurations, as described in the filing. All five antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 71.8%. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/19/2001 Application Dated: 10/19/2001 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AP2011BWLAN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Condition: Output is peak conducted. The previous grant for this device authorized 5 antenna configurations. This grant is for a sixth antenna. All six antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time averaging duty factor not exceeding 71.8%. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application CH6ov3ZChJvGfaSdTxbHTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/19/2001 Application Dated: 10/19/2001 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AP2011BWLAN |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Condition: Output is peak conducted. The previous grant for this device authorized 5 antenna configurations. This grant is for a sixth antenna. All six antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time averaging duty factor not exceeding 71.8%. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |