FCC ID PD9AX201D2

Intel Wireless AX201

by Intel Corporation

Grantee Code: PD9   Product Code: AX201D2
Latest application date: 2025-05-02

FCC ID Device Details

FCC IDPD9AX201D2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePD9
Product CodeAX201D2
Applicant BusinessIntel Corporation 🇫🇷
Equipment ClassIntel Wireless AX201

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5775 MHzClass II Permissive Change2025-05-02
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2025-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-05-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-10-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-04-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-04-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-04-13
5775 MHzClass II permissive change or modification of presently authorized equipment2023-02-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-02-08
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2023-02-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-01-06
2402-2480 MHzClass II Permissive Change2023-01-06
2402-2480 MHzClass II Permissive Change2023-01-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-12-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-12-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-09-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-09-26
2402-2480 MHzClass II Permissive Change2022-09-26
5855 MHzClass II permissive change or modification of presently authorized equipment2022-08-24
5775 MHzClass II permissive change or modification of presently authorized equipment2022-06-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-06-01
2422-2462 MHzClass II Permissive Change2022-06-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-05-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-05-19
2422-2462 MHzClass II Permissive Change2022-05-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-19
5180-5240 MHzClass II Permissive Change2022-04-19
2402-2480 MHzClass II Permissive Change2022-04-19
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-03
5180-5240 MHzClass II Permissive Change2022-02-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-01-25
5180-5240 MHzClass II Permissive Change2022-01-25
2402-2480 MHzClass II Permissive Change2022-01-25
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-01-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-01-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-01-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-12-03
5180-5240 MHzClass II Permissive Change2021-12-03
2402-2480 MHzClass II Permissive Change2021-12-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-10-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-10-13
2402-2480 MHzClass II Permissive Change2021-10-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-10-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-10-11
2402-2480 MHzClass II Permissive Change2021-10-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-08-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-08-23
5180-5240 MHzClass II Permissive Change2021-08-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-27
5180-5230 MHzClass II Permissive Change2021-07-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-07-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-14
5180-5240 MHzClass II Permissive Change2021-07-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-07-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-07-12
5180-5240 MHzClass II Permissive Change2021-06-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-06-24
2402-2480 MHzClass II Permissive Change2021-06-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-05-17
5180-5240 MHzClass II Permissive Change2021-05-17
2402-2480 MHzClass II Permissive Change2021-05-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-04-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-04-23
2402-2480 MHzClass II Permissive Change2021-04-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-03
5180-5240 MHzClass II Permissive Change2021-03-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-26
2402-2480 MHzClass II Permissive Change2021-02-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-23
5180-5240 MHzClass II Permissive Change2021-02-23
2402-2480 MHzClass II Permissive Change2021-02-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-18
2402-2480 MHzClass II Permissive Change2021-02-18
2402-2480 MHzClass II Permissive Change2021-02-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-01-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-01-25
2402-2480 MHzClass II Permissive Change2021-01-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-18
2402-2480 MHzClass II Permissive Change2020-12-18
5180-5240 MHzClass II Permissive Change2020-12-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-20
2402-2480 MHzClass II Permissive Change2020-11-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-18
5180-5240 MHzClass II Permissive Change2020-11-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-17
2402-2480 MHzClass II Permissive Change2020-11-17
2402-2480 MHzClass II Permissive Change2020-11-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-16
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-16
2402-2480 MHzClass II Permissive Change2020-11-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-09-24
5180-5240 MHzClass II Permissive Change2020-09-24
2402-2480 MHzClass II Permissive Change2020-09-24
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-09-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-09-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-09-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-09-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-09-15
2402-2480 MHzClass II Permissive Change2020-09-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-27
5180-5240 MHzClass II Permissive Change2020-08-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-08-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-26
2402-2480 MHzClass II Permissive Change2020-08-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-08-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-06
2402-2480 MHzClass II Permissive Change2020-08-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-06-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-06-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-09
5180-5240 MHzClass II Permissive Change2020-06-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-06-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-06-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-06-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-29
2402-2480 MHzClass II Permissive Change2020-05-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-14
2402-2480 MHzClass II Permissive Change2020-05-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-13
2402-2480 MHzClass II Permissive Change2020-05-13
5180-5240 MHzClass II Permissive Change2020-05-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-12
5180-5240 MHzClass II Permissive Change2020-05-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
2402-2480 MHzClass II Permissive Change2020-05-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-05-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-05-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-04-21

Exhibits

DocumentTypeAvailableFile
TempConfidential_Manual_75xXHD_Win11_UG_ENG_D02_250411_NoteUsers Manual2025-11-03PDF 701.8 KB
TempConfidential_11_EN Intel WiFi Adapter Information Guide_Draft_Rev05Users Manual2024-04-16PDF 3.4 MB
User ManualUsers Manual2023-10-11PDF 1.6 MB
3140_2-in-1_QSG_A00Users Manual2023-07-05PDF 294.3 KB
User ManualUsers Manual2023-07-05PDF 1.6 MB
User Manual RegulatoryUsers Manual2023-03-25PDF 1.7 MB
User ManualUsers Manual2023-02-08PDF 2.7 MB
User ManualUsers Manual2022-12-20PDF 2.7 MB
User ManualUsers Manual2022-11-15PDF 1.9 MB
UM_Generic Safety and Compliance NoticeUsers Manual2022-10-16PDF 5 MB
UM_RNUsers Manual2022-10-16PDF 1.4 MB
UM_UGUsers Manual2022-10-16PDF 4.5 MB
TempConfidential_Internal Photos_WLAN AntennaInternal Photos2025-11-03PDF 251.8 KB
TempConfidential_Internal photos_antennasInternal Photos2025-11-03PDF 251.8 KB
Internal PhotosInternal Photos2023-10-19PDF 152.8 KB
Internal PhotosInternal Photos2023-10-11PDF 833.4 KB
Internal PhotosInternal Photos2023-07-05PDF 831.2 KB
Internal PhotosInternal Photos2023-03-25PDF 983.8 KB
Internal PhotosInternal Photos2023-02-08PDF 1.5 MB
Internal PhotosInternal Photos2022-12-20PDF 87.7 KB
Internal PhotosInternal Photos2022-11-15PDF 519.2 KB
TP00137A internal photoInternal Photos2022-10-16PDF 331.7 KB
Titan5-15ARL_NP750XHD_US_250320ID Label/Location Info2025-05-02PDF 1.9 MB
Titan5-15ARL_NP754XHD_US_250320ID Label/Location Info2025-05-02PDF 1.9 MB
Label and LocationID Label/Location Info2023-04-13PDF 112.6 KB
Labels and LocationsID Label/Location Info2023-02-08PDF 71.6 KB
Labels and LocationsID Label/Location Info2023-01-06PDF 112.6 KB
Labels and LocationsID Label/Location Info2022-09-26PDF 106.4 KB
Temp_Confidential_SFACHI-WTW-P25030764_BV CPS Korea_NP750XHD_US-FCC SAR_Photo ofTest Setup Photos2025-11-03PDF 1.1 MB
220915-10.TR05-FCC_RSE_WLAN_UNII4_AX201D2W_Rev01_PhotographsTest Setup Photos2023-10-19PDF 532.7 KB
Test Report Antenna Data Hong Bo TBTest Setup Photos2023-10-11PDF 2.3 MB
Test Setup Photos Antenna Data Hong Bo TBTest Setup Photos2023-10-11PDF 2.3 MB
Test Setup Photos Hong Bo AntennaTest Setup Photos2023-10-11PDF 2.5 MB
Test Setup Photos SAR TR01Test Setup Photos2023-10-11PDF 659.3 KB
220817-01.TR01 -FCC_WLAN_FCC_Dell_P33T_WLAN_SKU_AX201D2W_Annex F_Rev03Test Setup Photos2023-07-05PDF 508.1 KB
Test Setup Photos Antenna DataTest Setup Photos2023-07-05PDF 2.6 MB
Test Setup Photos Antenna NBTest Setup Photos2023-07-05PDF 2.6 MB
Test Setup Photos Antenna TBTest Setup Photos2023-07-05PDF 2.6 MB
Test Setup Photos SAR Metadata onlyTest Setup Photos2023-07-05PDF 507.5 KB
Test Setup Photos SARTest Setup Photos2023-03-25PDF 584.1 KB
Test Setup Photos RSE TR05Test Setup Photos2023-02-08PDF 394.9 KB
Test Setup Photos Antenna NBTest Report2023-01-06PDF 1.6 MB
Test Setup Photos SARTest Setup Photos2022-12-20PDF 562.5 KB
Test Setup Photos SARTest Setup Photos2022-12-20PDF 548.6 KB
Test Setup Photos SARTest Setup Photos2022-11-15PDF 1.8 MB
AX201D2W_TsupTest Setup Photos2022-10-16PDF 378.2 KB
Antenna_Report Samsung_Titan5-15_0430Test Report2025-05-02PDF 524.7 KB
220915-10.TR05-FCC_RSE_WLAN_UNII4_AX201D2W_Rev01Test Report2023-10-19PDF 472.1 KB
Dipole Antenna report _ARY121-0009-002-H0_20230823_Rev02 Metadata onlyTest Report2023-10-19PDF 2.4 MB
Dipole Antenna report _ARY121-0009-002-H0_20231002_Rev04 Metadata onlyTest Report2023-10-19PDF 2.4 MB
Dipole Antenna report _ARY121-0009-002-H0_20231011_Rev04Test Report2023-10-19PDF 2.4 MB
Dipole Antenna report _Rev00_ARY121-0009-002-H0_Rev1.0 Metadata onlyTest Report2023-10-19PDF 2.4 MB
Test Report Antenna Hong Bo NBTest Report2023-04-13PDF 1.1 MB
Test Report Antenna Hong Bo TBTest Report2023-04-13PDF 1.3 MB
Test Report Antenna Data AwanTest Report2023-02-08PDF 1.4 MB
Test Report Antenna Data Hong BoTest Report2023-02-08PDF 2.2 MB
Test Report RSE TR05Test Report2023-02-08PDF 533.9 KB
220817-01.TR01 -FCC_WLAN_FCC_Dell_P33T_WLAN_SKU_AX201D2W_Annex E_Rev03 Metadata onlyTest Report2023-01-06PDF 5 MB
220817-01.TR01 -FCC_WLAN_FCC_Dell_P33T_WLAN_SKU_AX201D2W_Rev03 Metadata onlyTest Report2023-01-06PDF 1.7 MB
220817-01.TR02-FCC-IC_WLAN_G-Sensor_Dell_P33T_AX201D2W. Rev.01Test Report2023-01-06PDF 320 KB
Test Report Antenna Data NBTest Report2023-01-06PDF 1.6 MB
Test Report Antenna Data TBTest Report2023-01-06PDF 1.6 MB
Test Report G-Sensor Metadata onlyTest Report2023-01-06PDF 320 KB
Test Report G-Sensor Metadata onlyTest Report2023-01-06PDF 328.3 KB
Test Report Antenna DataTest Report2022-12-20PDF 362.2 KB
Test Report Antenna StarCrossTest Report2022-12-20PDF 718 KB
Test Report Antenna DataTest Report2022-09-26PDF 1.5 MB
Test Report TAS ComplianceTest Report2022-09-26PDF 439.4 KB
Attestation Covered List Metadata onlyCover Letter(s)2025-05-02PDF 225.7 KB
Attestation Covered ListAttestation Statements2025-05-02PDF 225.7 KB
Attestation Service of ProcessAttestation Statements2025-05-02PDF 95.1 KB
Attestation Service of Process Metadata onlyCover Letter(s)2025-05-02PDF 95.1 KB
Attestation Covered ListAttestation Statements2023-10-19PDF 234.7 KB
Attestation Service of ProcessAttestation Statements2023-10-19PDF 83.8 KB
Attestation Letter Agent Letter for ServiceAttestation Statements2023-04-13PDF 168.3 KB
Attestation Letter Covered ListAttestation Statements2023-04-13PDF 123.8 KB
FCC Agent for Service of Process Intel - BL-RP July 24 2023Attestation Statements2023-04-13PDF 83.8 KB
Attestation Letter Agent Letter for ServiceAttestation Statements2023-02-08PDF 150 KB
Attestation Letter Agent Letter for Service Rev 02Attestation Statements2023-02-08PDF 132.6 KB
Attestation Letter Covered ListAttestation Statements2023-02-08PDF 422.4 KB
Attestation Letter Sevice of ProcessAttestation Statements2023-02-08PDF 132.6 KB
Passive Scan AttestationAttestation Statements2023-01-06PDF 225.8 KB
FCC Confidentiality LetterCover Letter(s)2025-05-02PDF 1.1 MB
FCC Permisive Change LetterCover Letter(s)2025-05-02PDF 699.8 KB
Platform similarity declaration_FCC_NP750XHDCover Letter(s)2025-05-02PDF 878.6 KB
FCC Confidentiality LetterCover Letter(s)2023-10-19PDF 277.9 KB
FCC Modular Approval LetterCover Letter(s)2023-10-19PDF 1 MB
Premissive Change LetterCover Letter(s)2023-10-19PDF 1 MB
FCC Confidentiality LetterCover Letter(s)2023-04-13PDF 558.7 KB
Modular Approval LetterCover Letter(s)2023-04-13PDF 715.1 KB
Permissive Change LetterCover Letter(s)2023-04-13PDF 450.3 KB
FCC Confidentiality LetterCover Letter(s)2023-02-08PDF 603.4 KB
Modular Approval LetterCover Letter(s)2023-02-08PDF 720.5 KB
Permissive Change LetterCover Letter(s)2023-02-08PDF 274 KB
Confidentiality LetterCover Letter(s)2023-01-06PDF 553.4 KB
Modular Approval LetterCover Letter(s)2023-01-06PDF 664.3 KB
Premissive Change LetterCover Letter(s)2023-01-06PDF 384.2 KB
Software Security LetterCover Letter(s)2023-01-06PDF 354.8 KB
Modular LetterCover Letter(s)2022-12-20PDF 288.1 KB
Premissive Change letterCover Letter(s)2022-12-20PDF 279.6 KB
Premissive Change letterCover Letter(s)2022-12-20PDF 240.4 KB
Premissive Change letter Rev 03Cover Letter(s)2022-09-26PDF 284.5 KB
SFACHI-WTW-P25030764_BV CPS Korea_NP750XHD_US-FCC SARRF Exposure Info2025-05-02PDF 1.2 MB
SFACHI-WTW-P25030764_BV CPS Korea_NP750XHD_US-FCC SAR_Appendix A-Z 0502RF Exposure Info2025-05-02PDF 3 MB
220915-10.TR02-FCC_MPE_WLAN_UNII4_AX201D2W_Rev01RF Exposure Info2023-10-19PDF 375.1 KB
RF Exposure SAR Report Calibrations TR01RF Exposure Info2023-04-13PDF 2.6 MB
RF Exposure SAR Report TR01RF Exposure Info2023-04-13PDF 985.5 KB
RF Exposure MPE Report AWANRF Exposure Info2023-02-08PDF 327.6 KB
RF Exposure MPE Report AWAN TR01RF Exposure Info2023-02-08PDF 327.6 KB
RF Exposure MPE Report Hong BoRF Exposure Info2023-02-08PDF 327.4 KB
RF Exposure MPE Report Hong Bo TR03RF Exposure Info2023-02-08PDF 327.4 KB
220817-01.TR01 -FCC_WLAN_FCC_Dell_P33T_WLAN_SKU_AX201D2W_Annex E_Rev03RF Exposure Info2023-01-06PDF 5 MB
220817-01.TR01 -FCC_WLAN_FCC_Dell_P33T_WLAN_SKU_AX201D2W_Rev03RF Exposure Info2023-01-06PDF 1.7 MB
RF Exposure SAR Report Metadata onlyRF Exposure Info2023-01-06PDF 1.5 MB
RF Exposure SAR Report Calibration Metadata onlyRF Exposure Info2023-01-06PDF 5 MB
RF Exposure SAR Report Calibrations Metadata onlyRF Exposure Info2023-01-06PDF 5 MB
RF Exposure SARRF Exposure Info2022-12-20PDF 1 MB
RF Exposure SARRF Exposure Info2022-12-20PDF 1 MB
RF Exposure SAR CalibrationsRF Exposure Info2022-12-20PDF 2.7 MB
RF Exposure SAR CalibrationsRF Exposure Info2022-12-20PDF 2.7 MB
RF Exposure SAR CalibrationRF Exposure Info2022-09-26PDF 3.9 MB
RF Exposure SAR ReportRF Exposure Info2022-09-26PDF 1.4 MB

Application Information

Application IDak5RSXos/mGl3gzbrfLBGA==
Final Action Date2025-05-02
Application PurposeClass II Permissive Change
ModelAX201D2
Frequency Range5775 MHz
Device DescriptionIntel Wireless AX201

Applications

Application IDDatePurpose
ak5RSXos/mGl3gzbrfLBGA==2025-05-02Class II Permissive Change
OF3JvrMKoks2cVkrhU2O7w==2025-05-02Class II permissive change or modification of presently authorized equipment
CEfcdXM7dKKGpS+MdYliZg==2025-05-02Class II permissive change or modification of presently authorized equipment
YLr+CRbDA/rTNU/87sICig==2023-10-19Class II permissive change or modification of presently authorized equipment
Qx2zVscnKbCKJkpmYgJdWQ==2023-04-13Class II permissive change or modification of presently authorized equipment
K3rX7TioaWWKKZctsOZVsw==2023-04-13Class II permissive change or modification of presently authorized equipment
Iz+dXggz/UQhymUvn4AvtQ==2023-04-13Class II permissive change or modification of presently authorized equipment
PAptzIG77C0mTB6ir+w0Cw==2023-02-08Class II permissive change or modification of presently authorized equipment
Mil7TqmkgyY8nV+CPf/FFg==2023-02-08Class II permissive change or modification of presently authorized equipment
HKfu224/K2ZXJ3YfW0vivg==2023-02-08Class II permissive change or modification of presently authorized equipment
wmfUHUvNP/F3t03TjB4gXQ==2023-01-06Class II permissive change or modification of presently authorized equipment
6iDVgHCSmqgrX1Da0gLFUw==2023-01-06Class II Permissive Change
5NTOEgx7HUhcbhGcTCBVNA==2023-01-06Class II Permissive Change
zmmagpuGSgBitl7aTzrSiA==2022-12-20Class II permissive change or modification of presently authorized equipment
LNrT9jPEoUtpaoF5/NzA5Q==2022-12-20Class II permissive change or modification of presently authorized equipment
cxcw3d4LrbH7aH9/LiSqTg==2022-09-26Class II permissive change or modification of presently authorized equipment
boiUgRScjhVehypbtzCFtQ==2022-09-26Class II permissive change or modification of presently authorized equipment
7EgfyI8IVZv9LInh1/BzBQ==2022-09-26Class II Permissive Change
EGRes9MTU5AOn8VIewykvw==2022-08-24Class II permissive change or modification of presently authorized equipment
G7mlN4tpG39XzurUztvelA==2022-06-01Class II permissive change or modification of presently authorized equipment
FgL01ig5IB/O8lbc2ExjIA==2022-06-01Class II permissive change or modification of presently authorized equipment
4DGbQdHPQWUjqYVuxiOTIg==2022-06-01Class II Permissive Change
UTxsWXuKqBwsOrnQwqPdfA==2022-05-19Class II permissive change or modification of presently authorized equipment
EDIn8Elj0+7W9ZkWAG/uwg==2022-05-19Class II permissive change or modification of presently authorized equipment
8pKTFS+PeG6wtUg31HhJPQ==2022-05-19Class II Permissive Change
WZnWERKP3vM+YCXSGs9nHQ==2022-04-19Class II permissive change or modification of presently authorized equipment
74XrzhTh1h+XJEUyTR1u6A==2022-04-19Class II Permissive Change
5nqdg+3pKum0cUtPSHXFpA==2022-04-19Class II Permissive Change
w+uf2uncZih4heHf+ccsMg==2022-03-30Class II permissive change or modification of presently authorized equipment
cgR36Nv3KIXgUaRfIAUY9A==2022-03-30Class II permissive change or modification of presently authorized equipment
CUILx10ntT6F2nE0j5B9SQ==2022-03-30Class II permissive change or modification of presently authorized equipment
r4K32uUIynw20aQVkle26Q==2022-02-03Class II permissive change or modification of presently authorized equipment
OsVgJ7u726krRAjKvsdBLw==2022-02-03Class II permissive change or modification of presently authorized equipment
2WxgLquqot5GfsUD7QmDfQ==2022-02-03Class II Permissive Change
yYmYDTXTMZKy3rVRSHRHog==2022-01-25Class II permissive change or modification of presently authorized equipment
9eVw5qRC2CRtP5cgWmeI3Q==2022-01-25Class II Permissive Change
2D3k2hG5LZht3LjzGiU5wg==2022-01-25Class II Permissive Change
oB3IqWbzlBv5yFdI7jbgzw==2022-01-21Class II permissive change or modification of presently authorized equipment
eAiuC1mt+xFoIGwr+XuOiQ==2022-01-21Class II permissive change or modification of presently authorized equipment
eAfUDBaZgSUM2GheohQvOA==2022-01-21Class II permissive change or modification of presently authorized equipment
iw19CNfmCiYv6574HLeS3Q==2021-12-03Class II permissive change or modification of presently authorized equipment
AaTWgoicX8H7otCAwnHJqA==2021-12-03Class II Permissive Change
5dEGD+Mxz68rnWSCNFkHEQ==2021-12-03Class II Permissive Change
rOB+msj5/VDoXfzmAxAfzQ==2021-10-13Class II permissive change or modification of presently authorized equipment
Dw/qr1K4y3qS4e+2Vb25qg==2021-10-13Class II permissive change or modification of presently authorized equipment
7CrwgZpKqIGJR+QbXqXNeg==2021-10-13Class II Permissive Change
kvUUgc4O2x1n1mulcQWa2A==2021-10-11Class II permissive change or modification of presently authorized equipment
IHF6K4MnntW2tjZ0K7hMuA==2021-10-11Class II permissive change or modification of presently authorized equipment
1cw9AFWk0mPud/+Vsgg4SA==2021-10-11Class II Permissive Change
UzASQcUoCdxVDDvXDAuSoA==2021-08-23Class II permissive change or modification of presently authorized equipment
T+rS2cxPYbxUYURutmWqtg==2021-08-23Class II permissive change or modification of presently authorized equipment
2/B7uXs/8PbFxnGvNn5w6w==2021-08-23Class II Permissive Change
TnIaVhIeW+/+OS/Hnjy8Mg==2021-07-27Class II permissive change or modification of presently authorized equipment
G2k80LDliIuUqX7QrsvB+A==2021-07-27Class II permissive change or modification of presently authorized equipment
+qTcowhGAqB8lYW0HK+gaA==2021-07-27Class II Permissive Change
Z0rf4UhB6bu7uPBr5DxugQ==2021-07-23Class II permissive change or modification of presently authorized equipment
OwON6ve+c4tr6gJY5A0Geg==2021-07-23Class II permissive change or modification of presently authorized equipment
EBSm9Rk5riiTMNDsvEQllg==2021-07-23Class II permissive change or modification of presently authorized equipment
vbWQS7bubNaxNadm55dl0Q==2021-07-14Class II permissive change or modification of presently authorized equipment
jBkGZqw2z2Zx068+PDtEKQ==2021-07-14Class II permissive change or modification of presently authorized equipment
34tXGd0tuc69fUy5ODQOaw==2021-07-14Class II Permissive Change
j0tnjdbsvNXhFH8mcZVegA==2021-07-12Class II permissive change or modification of presently authorized equipment
gCuskT/+gyqWYeNPALEAbw==2021-07-12Class II permissive change or modification of presently authorized equipment
YtD90b1Ge+pvhAu9gRqh/A==2021-07-12Class II permissive change or modification of presently authorized equipment
a0549qiTAdjtIZ7L86AeqA==2021-06-24Class II Permissive Change
OdwH4MG34jDMsciPI3pJOg==2021-06-24Class II permissive change or modification of presently authorized equipment
4IgSRbI6DEHVMta96yTXVA==2021-06-24Class II Permissive Change
E9EjafinfIYE8tPiTr8wqg==2021-05-17Class II permissive change or modification of presently authorized equipment
3LA1PlfCWcFo6ci/JtKUpg==2021-05-17Class II Permissive Change
0qbRSKY7j6dpeAW4ZFXWmQ==2021-05-17Class II Permissive Change
ip88DqCCbiopZBBJUkkcKA==2021-04-23Class II permissive change or modification of presently authorized equipment
bUJLW07XPANObg1RpvlGsg==2021-04-23Class II permissive change or modification of presently authorized equipment
4UAUKDQJQOSjCERhLIVMNA==2021-04-23Class II Permissive Change
kkv9ijY8dPhlvNzQNLEoyg==2021-03-03Class II permissive change or modification of presently authorized equipment
dh7RcsD+7gjGkuqibiJ0Ww==2021-03-03Class II permissive change or modification of presently authorized equipment
3hB/Ldnibb0X8j5HjoGJVg==2021-03-03Class II Permissive Change
lVlLCC4zyQN5kLVUK8lRlg==2021-02-26Class II permissive change or modification of presently authorized equipment
aSGXuI8Gh2QPBThwO5/N8A==2021-02-26Class II permissive change or modification of presently authorized equipment
2cZ6CDLLyOTFScb8qqGnFA==2021-02-26Class II Permissive Change
iE/SUO20HotY99bIxhUiWw==2021-02-24Class II permissive change or modification of presently authorized equipment
PFmXhNpkbi4VSmCtb8q9aA==2021-02-24Class II permissive change or modification of presently authorized equipment
MOQushchEi07Tm3ORBxgQw==2021-02-24Class II permissive change or modification of presently authorized equipment
lQrXdRywJTSZoSL5hB4jPA==2021-02-23Class II permissive change or modification of presently authorized equipment
5Eg2Nf+u7VW+9j5m1AMY6A==2021-02-23Class II Permissive Change
0z1JSkz31WbdeefUT8zDVw==2021-02-23Class II Permissive Change
y7bc7VRhzVzzjmbIzfDkyw==2021-02-18Class II permissive change or modification of presently authorized equipment
QBlY6MELzQ/UIKp2+/pvlw==2021-02-18Class II permissive change or modification of presently authorized equipment
LcfP7Cl1KByga6NA/a9Pjg==2021-02-18Class II permissive change or modification of presently authorized equipment
FnlGgz4s6d7ucNIy05X8mQ==2021-02-18Class II permissive change or modification of presently authorized equipment
3UttBNRM+h3V3KBwvGeguA==2021-02-18Class II Permissive Change
0RGWFFhxrsvDuUEbPQ2Bqw==2021-02-18Class II Permissive Change
YI66tnMUHR3BOY8hcEgm0w==2021-02-01Class II permissive change or modification of presently authorized equipment
NeXQ5zg1rVEkX8e+fGZfXw==2021-02-01Class II permissive change or modification of presently authorized equipment
LPuXnKbtgU03Rc6Yk8a7DA==2021-02-01Class II permissive change or modification of presently authorized equipment
oh/1LBdHYv5pC9uDFiq0nw==2021-01-25Class II permissive change or modification of presently authorized equipment
HBsmGFG/+zMb0FeRnHOB1Q==2021-01-25Class II permissive change or modification of presently authorized equipment
AMQ3CwTIJ7yJTbSlxpSFMA==2021-01-25Class II Permissive Change
ewz4DYHTEJiW2Mb/NFC99A==2020-12-21Class II permissive change or modification of presently authorized equipment
XdBetNr/PU4lmoNrgUP7EQ==2020-12-21Class II permissive change or modification of presently authorized equipment
RPsljdZPGRIKjbeOL5RhgA==2020-12-21Class II permissive change or modification of presently authorized equipment
UIZ3INrlXyncAz1yHhPIBQ==2020-12-18Class II permissive change or modification of presently authorized equipment
1lRG2c3Z7HJuVP/+KBvhSQ==2020-12-18Class II Permissive Change
1EToT/ivdYVoujbRVBR1sA==2020-12-18Class II Permissive Change
y0kPTat+Py3mIsMBrRdccg==2020-12-15Class II permissive change or modification of presently authorized equipment
swEQ0SGi37LFzIS0SbX4+A==2020-12-15Class II permissive change or modification of presently authorized equipment
nHm7HI0EBGW1CnVNF+BDZg==2020-12-15Class II permissive change or modification of presently authorized equipment
zdICWdM9bZ+U64omXT9HKQ==2020-12-07Class II permissive change or modification of presently authorized equipment
lRAcX6w+vyjK/6/B1quLXw==2020-12-07Class II permissive change or modification of presently authorized equipment
jlOcH7RCc3q0WHWbzvXrQA==2020-12-07Class II permissive change or modification of presently authorized equipment
t0AieP1M9+Qu+AT4RJg1tQ==2020-12-04Class II permissive change or modification of presently authorized equipment
Pvq2uuyvRY151NrwXbqkig==2020-12-04Class II permissive change or modification of presently authorized equipment
LFtsGcdko/hh8fQ9OHHFWA==2020-12-04Class II permissive change or modification of presently authorized equipment
ewWYqIMmX+xgabNBVue8+g==2020-12-02Class II permissive change or modification of presently authorized equipment
bNcCLAl+YVuOdYeresD8NQ==2020-12-02Class II permissive change or modification of presently authorized equipment
FJsHKbsN7fbx+M/urnaXAQ==2020-12-02Class II permissive change or modification of presently authorized equipment
vaMCuZ4j6jm2yxwPE8kFrg==2020-11-24Class II permissive change or modification of presently authorized equipment
ckwAv5+L3D1tQlsEyZMIZQ==2020-11-24Class II permissive change or modification of presently authorized equipment
Il4m6AYqiByjwc2lYk7JbQ==2020-11-24Class II permissive change or modification of presently authorized equipment
fpA9NhiOIAvt59ySqheOzw==2020-11-23Class II permissive change or modification of presently authorized equipment
Z1P9apOwtwNcQ4f2+hoAdw==2020-11-23Class II permissive change or modification of presently authorized equipment
WdcdZliqhxXJX0Rxn50sHA==2020-11-23Class II permissive change or modification of presently authorized equipment
rkaC3FN9bAtFrqPwj0TzVg==2020-11-20Class II permissive change or modification of presently authorized equipment
BFZK7qSwqjCjBbyhTv2z9A==2020-11-20Class II permissive change or modification of presently authorized equipment
3Q/KSvSMpiuJQKK5pb75ig==2020-11-20Class II Permissive Change
dffVB8giRBD7J4ABUGEasA==2020-11-19Class II permissive change or modification of presently authorized equipment
WpBczvbRSbfIUW/+w7/mGA==2020-11-19Class II permissive change or modification of presently authorized equipment
RrJnwhmPsWA7Kv5cMl5C0g==2020-11-19Class II permissive change or modification of presently authorized equipment
h0ZAnInCMo+es5sjxJvDAg==2020-11-18Class II permissive change or modification of presently authorized equipment
Sohxar1Rv2juE9Le/ITEZw==2020-11-18Class II permissive change or modification of presently authorized equipment
PfL40lNc/ZtUJpJtaRM2lQ==2020-11-18Class II permissive change or modification of presently authorized equipment
GYnrIXv86kvDLThdZLjb+g==2020-11-18Class II permissive change or modification of presently authorized equipment
EtdL4YIV4jml4lArAsCopA==2020-11-18Class II permissive change or modification of presently authorized equipment
66po+NDVnUWo5BHZC4ozMg==2020-11-18Class II Permissive Change
wWv+r63kdMnFstZi2u6c9A==2020-11-17Class II permissive change or modification of presently authorized equipment
lc3oBo0pGUL564R6dZsIbg==2020-11-17Class II permissive change or modification of presently authorized equipment
b9GimmS2dl4IFVglAwdSkg==2020-11-17Class II permissive change or modification of presently authorized equipment
Nkup4/kadmr2k1WnqCgt/g==2020-11-17Class II permissive change or modification of presently authorized equipment
AeSPoop6rO4cQ1Kf2sOm7A==2020-11-17Class II Permissive Change
3wcZgR926Tk/02jkDQ5KKg==2020-11-17Class II Permissive Change
jrwWCR4LAArIGU3Hkv3uUQ==2020-11-16Class II permissive change or modification of presently authorized equipment
fL9kBpTTykAA5huvH7Q9NA==2020-11-16Class II permissive change or modification of presently authorized equipment
8a7GwtpkoCis3bpcrUP5pQ==2020-11-16Class II Permissive Change
H2TplW3xzKoNqdrRFw6hpQ==2020-09-24Class II permissive change or modification of presently authorized equipment
8lMQK00qDmUuw40xqQk8cw==2020-09-24Class II Permissive Change
+pPwsdj/kenNNHzx2gf/wg==2020-09-24Class II Permissive Change
vKQtrJX3OGKEd9JxSwFKjA==2020-09-17Class II permissive change or modification of presently authorized equipment
uEXGIRz7CA5+o83Tm79lkA==2020-09-17Class II permissive change or modification of presently authorized equipment
Yy/UG0hSU0BPiW5ry0gqNQ==2020-09-17Class II permissive change or modification of presently authorized equipment
whwnN1hNvOTh7WfCfQ5U1w==2020-09-15Class II permissive change or modification of presently authorized equipment
hpxKQry4Jft+27neRSUT5Q==2020-09-15Class II permissive change or modification of presently authorized equipment
Ae6FW3+Rjy15y4JNtgmS2A==2020-09-15Class II Permissive Change
k1GRVzVhfwueUcKXfqLqzA==2020-08-27Class II permissive change or modification of presently authorized equipment
Mt/m9EYkUsl/XBnoGeT7Yg==2020-08-27Class II permissive change or modification of presently authorized equipment
4xNdN+4CipcRyTlfNd/rwg==2020-08-27Class II Permissive Change
txN87sfBDaiNUN5347tOnQ==2020-08-26Class II permissive change or modification of presently authorized equipment
mwF88DevrO9sabuaO0q2yg==2020-08-26Class II permissive change or modification of presently authorized equipment
2XBtXyGzzRecjjmI+46yig==2020-08-26Class II Permissive Change
niWVcmyCMQ1VqAjnWt7pBw==2020-08-06Class II permissive change or modification of presently authorized equipment
PB2cdTaULkGOgMrw5+JqMQ==2020-08-06Class II permissive change or modification of presently authorized equipment
/7IErWkHhfqiDjEZNCL7kg==2020-08-06Class II Permissive Change
yNW0gTDxCVz0WURrHLwLaw==2020-06-30Class II permissive change or modification of presently authorized equipment
oDLd/NM+ehj8N+HgQsOlaQ==2020-06-30Class II permissive change or modification of presently authorized equipment
H5MqBXIWn8mCllwujkjbbA==2020-06-30Class II permissive change or modification of presently authorized equipment
xbsARwvQKlv/2X40ZZc8fw==2020-06-18Class II permissive change or modification of presently authorized equipment
JLPd6HZG8m+RCpEfdU6s7w==2020-06-18Class II permissive change or modification of presently authorized equipment
H/8C+s3yva1mku8dNepeWg==2020-06-18Class II permissive change or modification of presently authorized equipment
xjHIKGOrQqNLOZQ/1Wy/4Q==2020-06-09Class II permissive change or modification of presently authorized equipment
pX7OXCmXzWh7rlcLiT8LBA==2020-06-09Class II permissive change or modification of presently authorized equipment
2bmnx4cpd7vsOL5aNjvpYg==2020-06-09Class II Permissive Change
yXQCf4BngCE5s0YjD2QKuw==2020-06-02Class II permissive change or modification of presently authorized equipment
xkPQeGAIjMthyY/pX0fa1A==2020-06-02Class II permissive change or modification of presently authorized equipment
dqrSTv7e8KacWBsa8dQPJQ==2020-06-02Class II permissive change or modification of presently authorized equipment
dMzOEHU5DtGr0UIj5eiluw==2020-06-01Class II permissive change or modification of presently authorized equipment
MJ0NkeDoE1Ne9iLz6sOJ+A==2020-06-01Class II permissive change or modification of presently authorized equipment
E6LgRW9n4tH7wVv0A9IkNg==2020-06-01Class II permissive change or modification of presently authorized equipment
hDJ5IoNew+jDD4a3gT0X4Q==2020-05-29Class II permissive change or modification of presently authorized equipment
g7+8Se/by2vF1ifLcmlxnA==2020-05-29Class II permissive change or modification of presently authorized equipment
ANBgMBVn2tiSipPdpndS/A==2020-05-29Class II Permissive Change
v3PBbkwNOQad2+dUoy3UDA==2020-05-14Class II permissive change or modification of presently authorized equipment
HTuuFZK48kugMFWlmy8EAA==2020-05-14Class II permissive change or modification of presently authorized equipment
7lB+JkFGSkciatqhzBwBgA==2020-05-14Class II Permissive Change
T1jSs+p1EneBPl/McYrbcQ==2020-05-13Class II permissive change or modification of presently authorized equipment
9LQM/zCi5vWMbnrRoDoSTw==2020-05-13Class II Permissive Change
/QN1m43A62qxNKE4ISLPcg==2020-05-13Class II Permissive Change
qEY1PeP4lJcPWku2Id9RTw==2020-05-12Class II permissive change or modification of presently authorized equipment
a9+9lmanccHKs8oe51/zTA==2020-05-12Class II Permissive Change
YwO1IRZGFu/n49tarFAk9g==2020-05-12Class II permissive change or modification of presently authorized equipment
N5qAQtjEdwZEY642u88nUQ==2020-05-12Class II permissive change or modification of presently authorized equipment
Mr4yk3HOypQnD/Cb6twx9w==2020-05-12Class II permissive change or modification of presently authorized equipment
JpTUpQscb/D21bZJlrKLwg==2020-05-12Class II permissive change or modification of presently authorized equipment
vshupjrlGCOKAHn6/Ib1zw==2020-05-06Class II permissive change or modification of presently authorized equipment
ZS8RmASzZ5TfhVhgL2z2vg==2020-05-06Class II permissive change or modification of presently authorized equipment
UWISSVeDHAav1ev/foMabg==2020-05-06Class II permissive change or modification of presently authorized equipment
IrKsl1tNgmGTtMrPNXHZgA==2020-05-06Class II permissive change or modification of presently authorized equipment
HIRhTM39+V/78vT6OV4CuA==2020-05-06Class II permissive change or modification of presently authorized equipment
3znX7JxJmm3HRxgOuPN2CA==2020-05-06Class II Permissive Change
r3+wdmjmA28vYebt9uJsMw==2020-05-04Class II permissive change or modification of presently authorized equipment
ZA4hXRS4O9SMFxmJIVvg+Q==2020-05-04Class II permissive change or modification of presently authorized equipment
CEhfDoJKKpuGgd0eAJsHew==2020-05-04Class II permissive change or modification of presently authorized equipment
wfa1eXC7W4Bv+Uxg9hbFWQ==2020-04-21Class II permissive change or modification of presently authorized equipment
zRf+xy3OGUw70BAzSTs/jQ==Original Equipment
ym9lJkDxa1zEpF6Y60aBdA==Class II permissive change or modification of presently authorized equipment
yRqeZUSSF2ItWTfhHL4alQ==Class II permissive change or modification of presently authorized equipment
xOpeOyNsSvF08VFD4oHHJw==Class II permissive change or modification of presently authorized equipment
xE+j5Pe5iil3qNNUXvvnoA==Class II permissive change or modification of presently authorized equipment
x6BVVJfcrkFiRurLEJ7kMw==Class II permissive change or modification of presently authorized equipment
waeRHoI5SlbQOtzA4369RA==Class II permissive change or modification of presently authorized equipment
uqLkJ0uHH1IiAaMahXuGWw==Class II permissive change or modification of presently authorized equipment
sEnyWhfW4PsSycBCtJJung==Class II permissive change or modification of presently authorized equipment
sAyMSkHNBEXBHGRGWwEgGg==Original Equipment
ruTD16vMhAohxJ45Yxg3RA==Class II permissive change or modification of presently authorized equipment
ql2kjdW4WUcKykM9aqPXQQ==Class II permissive change or modification of presently authorized equipment
pUB7QsFXfpXeIM9pDbTGyw==Class II permissive change or modification of presently authorized equipment
mOpA2NUkU5Yy+ZMMsBpikA==Class II permissive change or modification of presently authorized equipment
kVbDcvQdhFycs2KEMRC28A==Class II permissive change or modification of presently authorized equipment
jENLbkSkpTRrHKQzk9CoBg==Class II permissive change or modification of presently authorized equipment
ilpPxHpIklvBM1xM/YWCzQ==Class II permissive change or modification of presently authorized equipment
hZVWIqIKlPLn1PUBtMHmqw==Class II permissive change or modification of presently authorized equipment
fJDC6f0wUFt4r/Sz2YPDdQ==Original Equipment
dSmded2YPIaCQnpIzaysfw==Class II permissive change or modification of presently authorized equipment
c6LUScXcSEyP80FmUNzfAA==Class II permissive change or modification of presently authorized equipment
ZsvXG9fYfELT6lqw59buOg==Class II permissive change or modification of presently authorized equipment
ZPLjQOoWn9cWPvUW0RpL2A==Class II permissive change or modification of presently authorized equipment
ZN70TuWAE9jRpTH1AwfGMw==Class II permissive change or modification of presently authorized equipment
YA0LoqxKGNvZQlcXjZHgAA==Class II permissive change or modification of presently authorized equipment
WGbdx1mRv1rXAjU6Dn4WYA==Class II permissive change or modification of presently authorized equipment
RikxcwzGDZ1SHqhYQ5NJ+A==Class II permissive change or modification of presently authorized equipment
Q2bk6UpN8xFeLOuMqXsVEA==Class II permissive change or modification of presently authorized equipment
P+u0qKe6EC90BtDkH1o4dQ==Class II permissive change or modification of presently authorized equipment
OjKb5omR7X4coIQ0QbcswA==Class II permissive change or modification of presently authorized equipment
NNgs5yZJSgHxmg0At0orzw==Class II permissive change or modification of presently authorized equipment
MwpZde1z1BUovo+KR202ow==Class II permissive change or modification of presently authorized equipment
M9gMQMVphGwRBA+IK7dA2w==Class II permissive change or modification of presently authorized equipment
M1uXlOSbrR1UixaTFpq4JQ==Class II permissive change or modification of presently authorized equipment
L59DxLkOtJXGDKGKJddQMg==Class II permissive change or modification of presently authorized equipment
L516j8AOgso5HahFVMC6Sw==Class II permissive change or modification of presently authorized equipment
KGyg4tXr8UQz6S2BCtP/CQ==Class II permissive change or modification of presently authorized equipment
JfXvFbfDH5Lof6Ut7AVJKw==Class II permissive change or modification of presently authorized equipment
Im8l2tHkXJeu8IgwHrTp9w==Class II permissive change or modification of presently authorized equipment
IilwacwrJ87gbkLvOjrgww==Class II permissive change or modification of presently authorized equipment
Ii787UMbFVLHCu82cNdNMA==Class II permissive change or modification of presently authorized equipment
IG2mtwgXeZ3x824Cb9BGEQ==Class II permissive change or modification of presently authorized equipment
GcGQepe2rhEwZtv916ueGg==Class II permissive change or modification of presently authorized equipment
GA8XvSca76zcH0RZcFrcAg==Class II permissive change or modification of presently authorized equipment
EjjOLMjZwyPC7TaLuRjEYA==Class II permissive change or modification of presently authorized equipment
EipnJzPZIjTjWADmEX9Rtg==Class II permissive change or modification of presently authorized equipment
DXutO2VD5d5oVhirK4mVNg==Class II permissive change or modification of presently authorized equipment
DQ+bgsteo8QDGCcoGTmprA==Class II permissive change or modification of presently authorized equipment
CQcypQYF64ru6kqWu9L8eg==Class II permissive change or modification of presently authorized equipment
BblJcsP6Y4rXm2STfDGCPQ==Class II permissive change or modification of presently authorized equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00715CCC
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.001000015CCC

Grants

TCB Grant - Application ZsvXG9fYfELT6lqw59buOg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/07/2019

Application Dated: 11/07/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.29W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZsvXG9fYfELT6lqw59buOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/07/2019

Application Dated: 11/07/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.29W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ZS8RmASzZ5TfhVhgL2z2vg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/06/2020

Application Dated: 05/06/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.45W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZS8RmASzZ5TfhVhgL2z2vg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/06/2020

Application Dated: 05/06/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.45W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application zRf+xy3OGUw70BAzSTs/jQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/20/2018

Application Dated: 11/20/2018
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zRf+xy3OGUw70BAzSTs/jQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/20/2018

Application Dated: 11/20/2018
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ZPLjQOoWn9cWPvUW0RpL2A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/16/2019

Application Dated: 08/15/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.086  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.96W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZPLjQOoWn9cWPvUW0RpL2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/16/2019

Application Dated: 08/15/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.086  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.96W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ZN70TuWAE9jRpTH1AwfGMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/30/2019

Application Dated: 10/30/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.066  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and1.45W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZN70TuWAE9jRpTH1AwfGMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 10/30/2019

Application Dated: 10/30/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.066  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and1.45W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application zmmagpuGSgBitl7aTzrSiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 12/20/2022

Application Dated: 12/06/2022
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.145  
CC MO 15E 5190.0  -  5230.0 0.13  
CC MO 15E 5210.0  -  5210.0 0.095  
CC MO 15E 5250.0  -  5250.0 0.084  
CC MO ND 15E 5260.0  -  5320.0 0.145  
CC MO ND 15E 5270.0  -  5310.0 0.124  
CC MO ND 15E 5290.0  -  5290.0 0.086  
CC MO ND 15E 5500.0  -  5700.0 0.141  
CC MO ND 15E 5510.0  -  5670.0 0.138  
CC MO ND 15E 5530.0  -  5690.0 0.15  
CC MO ND 15E 5710.0  -  5710.0 0.149  
CC MO ND 15E 5720.0  -  5720.0 0.105  
CC MO 15E 5745.0  -  5825.0 0.139  
CC MO 15E 5755.0  -  5795.0 0.135  
CC MO 15E 5775.0  -  5775.0 0.109  
CC MO 15E 5845.0  -  5885.0 0.322  
CC MO 15E 5835.0  -  5875.0 0.692  
CC MO 15E 5855.0  -  5855.0 0.422  
CC MO 15E 5815.0  -  5815.0 0.163  

Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively.

This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application zmmagpuGSgBitl7aTzrSiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 12/20/2022

Application Dated: 12/06/2022
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.145  
CC MO 15E 5190.0  -  5230.0 0.13  
CC MO 15E 5210.0  -  5210.0 0.095  
CC MO 15E 5250.0  -  5250.0 0.084  
CC MO ND 15E 5260.0  -  5320.0 0.145  
CC MO ND 15E 5270.0  -  5310.0 0.124  
CC MO ND 15E 5290.0  -  5290.0 0.086  
CC MO ND 15E 5500.0  -  5700.0 0.141  
CC MO ND 15E 5510.0  -  5670.0 0.138  
CC MO ND 15E 5530.0  -  5690.0 0.15  
CC MO ND 15E 5710.0  -  5710.0 0.149  
CC MO ND 15E 5720.0  -  5720.0 0.105  
CC MO 15E 5745.0  -  5825.0 0.139  
CC MO 15E 5755.0  -  5795.0 0.135  
CC MO 15E 5775.0  -  5775.0 0.109  
CC MO 15E 5845.0  -  5885.0 0.322  
CC MO 15E 5835.0  -  5875.0 0.692  
CC MO 15E 5855.0  -  5855.0 0.422  
CC MO 15E 5815.0  -  5815.0 0.163  

Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively.

This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application zdICWdM9bZ+U64omXT9HKQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/07/2020

Application Dated: 12/07/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.58W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zdICWdM9bZ+U64omXT9HKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 12/07/2020

Application Dated: 12/07/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.58W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ZA4hXRS4O9SMFxmJIVvg+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/04/2020

Application Dated: 04/30/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.50W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZA4hXRS4O9SMFxmJIVvg+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/04/2020

Application Dated: 04/30/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.50W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Z1P9apOwtwNcQ4f2+hoAdw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/23/2020

Application Dated: 11/23/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.086  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.50W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2).

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Z1P9apOwtwNcQ4f2+hoAdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/23/2020

Application Dated: 11/23/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.145  
38 CC MO 15E 5190.0  -  5230.0 0.13  
38 CC MO 15E 5210.0  -  5210.0 0.095  
38 CC MO 15E 5250.0  -  5250.0 0.084  
38 CC MO ND 15E 5260.0  -  5320.0 0.145  
38 CC MO ND 15E 5270.0  -  5310.0 0.124  
38 CC MO ND 15E 5290.0  -  5290.0 0.086  
38 CC MO ND 15E 5500.0  -  5700.0 0.141  
38 CC MO ND 15E 5510.0  -  5670.0 0.138  
38 CC MO ND 15E 5710.0  -  5710.0 0.149  
38 CC MO ND 15E 5720.0  -  5720.0 0.105  
38 CC MO ND 15E 5530.0  -  5690.0 0.15  
38 CC MO 15E 5745.0  -  5825.0 0.139  
38 CC MO 15E 5755.0  -  5795.0 0.135  
38 CC MO 15E 5775.0  -  5775.0 0.109  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.50W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2).

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Z0rf4UhB6bu7uPBr5DxugQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/23/2021

Application Dated: 07/23/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Z0rf4UhB6bu7uPBr5DxugQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 07/23/2021

Application Dated: 07/23/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application yYmYDTXTMZKy3rVRSHRHog==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/25/2022

Application Dated: 01/24/2022
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.1.02W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yYmYDTXTMZKy3rVRSHRHog==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 01/25/2022

Application Dated: 01/24/2022
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.1.02W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Yy/UG0hSU0BPiW5ry0gqNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/17/2020

Application Dated: 09/17/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Yy/UG0hSU0BPiW5ry0gqNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/17/2020

Application Dated: 09/17/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yXQCf4BngCE5s0YjD2QKuw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/02/2020

Application Dated: 06/01/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively.

This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yXQCf4BngCE5s0YjD2QKuw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/02/2020

Application Dated: 06/01/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively.

This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application YwO1IRZGFu/n49tarFAk9g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/12/2020

Application Dated: 05/12/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YwO1IRZGFu/n49tarFAk9g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/12/2020

Application Dated: 05/12/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YtD90b1Ge+pvhAu9gRqh/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/12/2021

Application Dated: 07/12/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.42W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YtD90b1Ge+pvhAu9gRqh/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 07/12/2021

Application Dated: 07/12/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.42W/kg respectively.

This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yRqeZUSSF2ItWTfhHL4alQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/28/2020

Application Dated: 02/28/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.

This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yRqeZUSSF2ItWTfhHL4alQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 02/28/2020

Application Dated: 02/28/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively.

This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yNW0gTDxCVz0WURrHLwLaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/30/2020

Application Dated: 06/30/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.51W/kg respectively.

This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yNW0gTDxCVz0WURrHLwLaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/30/2020

Application Dated: 06/30/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.51W/kg respectively.

This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ym9lJkDxa1zEpF6Y60aBdA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/16/2019

Application Dated: 08/15/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.96W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ym9lJkDxa1zEpF6Y60aBdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/16/2019

Application Dated: 08/15/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.96W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YLr+CRbDA/rTNU/87sICig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 10/19/2023

Application Dated: 09/06/2023
Intel Corporation
425 rue de Goa
Le Cargo B6
Antibes, 06600
France
 
Attention: Benjamin Lavenant , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.145  
CC MO 15E 5190.0  -  5230.0 0.13  
CC MO 15E 5210.0  -  5210.0 0.095  
CC MO 15E 5250.0  -  5250.0 0.084  
CC MO ND 15E 5260.0  -  5320.0 0.145  
CC MO ND 15E 5270.0  -  5310.0 0.124  
CC MO ND 15E 5290.0  -  5290.0 0.086  
CC MO ND 15E 5500.0  -  5700.0 0.141  
CC MO ND 15E 5510.0  -  5670.0 0.138  
CC MO ND 15E 5530.0  -  5690.0 0.15  
CC MO ND 15E 5710.0  -  5710.0 0.149  
CC MO ND 15E 5720.0  -  5720.0 0.105  
CC MO 15E 5745.0  -  5825.0 0.139  
CC MO 15E 5755.0  -  5795.0 0.135  
CC MO 15E 5775.0  -  5775.0 0.109  
CC MO 15E 5845.0  -  5885.0 0.322  
CC MO 15E 5835.0  -  5875.0 0.692  
CC MO 15E 5855.0  -  5855.0 0.422  
CC MO 15E 5815.0  -  5815.0 0.163  

Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.

Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application YLr+CRbDA/rTNU/87sICig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
425 rue de Goa Le Cargo B6
Antibes, 06600
France
  Date of Grant: 10/19/2023

Application Dated: 09/06/2023
 
Attention: Benjamin Lavenant , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.145  
CC MO 15E 5190.0  -  5230.0 0.13  
CC MO 15E 5210.0  -  5210.0 0.095  
CC MO 15E 5250.0  -  5250.0 0.084  
CC MO ND 15E 5260.0  -  5320.0 0.145  
CC MO ND 15E 5270.0  -  5310.0 0.124  
CC MO ND 15E 5290.0  -  5290.0 0.086  
CC MO ND 15E 5500.0  -  5700.0 0.141  
CC MO ND 15E 5510.0  -  5670.0 0.138  
CC MO ND 15E 5530.0  -  5690.0 0.15  
CC MO ND 15E 5710.0  -  5710.0 0.149  
CC MO ND 15E 5720.0  -  5720.0 0.105  
CC MO 15E 5745.0  -  5825.0 0.139  
CC MO 15E 5755.0  -  5795.0 0.135  
CC MO 15E 5775.0  -  5775.0 0.109  
CC MO 15E 5845.0  -  5885.0 0.322  
CC MO 15E 5835.0  -  5875.0 0.692  
CC MO 15E 5855.0  -  5855.0 0.422  
CC MO 15E 5815.0  -  5815.0 0.163  

Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.

Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application YI66tnMUHR3BOY8hcEgm0w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/01/2021

Application Dated: 02/01/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.48W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YI66tnMUHR3BOY8hcEgm0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 02/01/2021

Application Dated: 02/01/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201D2
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2472.0 0.955  
CC MO 15C 2422.0  -  2462.0 0.58  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.48W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: