FCC ID PD9AX201D2L
Intel Wi-Fi 6 AX201
by Intel Corporation
Grantee Code: PD9 Product Code: AX201D2L
Latest application date: 2023-10-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-10-18 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 5180-5230 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-18 |
| 2402-2480 MHz | Original Equipment | 2018-12-19 |
| 2402-2480 MHz | Original Equipment | 2018-12-19 |
| 5180-5240 MHz | Original Equipment | 2018-12-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_11_EN Intel WiFi Adapter Information Guide_Draft_Rev05 | Users Manual | 2024-04-15 | PDF 3.4 MB |
| User Manual | Users Manual | 2022-12-09 | PDF 2.7 MB |
| Intel WiFi Adapter Information Guide_5.25_Draft_081122_Rev02 | Users Manual | 2022-08-24 | PDF 2.6 MB |
| User Manual | Users Manual | 2020-09-25 | PDF 1.6 MB |
| User Manual | Users Manual | 2019-12-15 | PDF 2 MB |
| User Manual | Users Manual | 2019-12-15 | PDF 2 MB |
| User Manual | Users Manual | 2019-06-16 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2023-10-18 | PDF 152.8 KB |
| Internal Photos | Internal Photos | 2022-12-09 | PDF 87.7 KB |
| Internal Photos_Antennas | Internal Photos | 2022-08-24 | PDF 87.7 KB |
| Internal Photos | Internal Photos | 2020-09-25 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2019-06-16 | PDF 116.4 KB |
| External Photos | External Photos | 2020-09-25 | PDF 757.7 KB |
| External Photos | External Photos | 2019-06-16 | PDF 116.2 KB |
| Labels and Locations | ID Label/Location Info | 2020-09-25 | PDF 262.8 KB |
| Label and Location | ID Label/Location Info | 2019-06-18 | PDF 711.5 KB |
| Label and Location | ID Label/Location Info | 2019-06-18 | PDF 139.8 KB |
| Label and Location | ID Label/Location Info | 2018-12-19 | PDF 95 KB |
| Label and Location Revised | ID Label/Location Info | 2018-12-19 | PDF 139.8 KB |
| 220915-10.TR06-FCC_RSE_WLAN_UNII4_AX201D2WL_Rev01_Photographs | Test Setup Photos | 2023-10-18 | PDF 581.3 KB |
| Test Setup Photos SAR | Test Setup Photos | 2022-12-09 | PDF 714.6 KB |
| 210209-01.TR38 - FCC, UNII4_RF, AX201D2WL_Rev02 - Photographs | Test Setup Photos | 2022-08-24 | PDF 988.4 KB |
| 210209-01.TR39_FCC_UNII-4_SAR_AX201D2WL_Rev02_Annex F | Test Setup Photos | 2022-08-24 | PDF 608.8 KB |
| Test Setup Photos | Test Setup Photos | 2020-09-25 | PDF 451.6 KB |
| Test Setup Photos SAR | Test Setup Photos | 2019-12-15 | PDF 780 KB |
| Test Setup Photos SAR | Test Setup Photos | 2019-12-15 | PDF 803.3 KB |
| Test Setup Photos | Test Setup Photos | 2019-06-16 | PDF 803.7 KB |
| Test Setup Photos | Test Setup Photos | 2019-06-16 | PDF 318 KB |
| Test Setup Photos 1 | Test Setup Photos | 2019-06-16 | PDF 299.9 KB |
| Test Setup Photos 2 | Test Setup Photos | 2019-06-16 | PDF 169.5 KB |
| Test Setup Photos 3 | Test Setup Photos | 2019-06-16 | PDF 713.2 KB |
| 220915-10.TR06-FCC_RSE_WLAN_UNII4_AX201D2WL_Rev01 | Test Report | 2023-10-18 | PDF 472.1 KB |
| Dipole Antenna report _ARY121-0009-002-H0_20230823_Rev02 Metadata only | Test Report | 2023-10-18 | PDF 2.4 MB |
| Dipole Antenna report _ARY121-0009-002-H0_20231002_Rev04 Metadata only | Test Report | 2023-10-18 | PDF 2.4 MB |
| Dipole Antenna report _ARY121-0009-002-H0_20231011_Rev04 | Test Report | 2023-10-18 | PDF 2.4 MB |
| Dipole Antenna report _Rev00_ARY121-0009-002-H0_Rev1.0 Metadata only | Test Report | 2023-10-18 | PDF 2.4 MB |
| Test Report Antenna Data | Test Report | 2022-12-09 | PDF 362.2 KB |
| Test Report Antenna StarCross | Test Report | 2022-12-09 | PDF 718 KB |
| 210209-01.TR38 - FCC, UNII4_RF, AX201D2WL_Rev02_Part1 | Test Report | 2022-08-24 | PDF 4.7 MB |
| 210209-01.TR38 - FCC, UNII4_RF, AX201D2WL_Rev02_Part2 | Test Report | 2022-08-24 | PDF 4.3 MB |
| 5.9GHz Addendum to SkyCross Intel Antenna Data Sheet | Test Report | 2022-08-24 | PDF 362.2 KB |
| Intel_Ref_Antenna data_HMC-M2 Ant_Spec_Universe_SkyCross Antenna | Test Report | 2022-08-24 | PDF 718 KB |
| Test Report 15.407 Part 1 | Test Report | 2020-09-25 | PDF 5.4 MB |
| Test Report 15.407 Part 2 | Test Report | 2020-09-25 | PDF 5.5 MB |
| Test Report 15.407 Part 3 | Test Report | 2020-09-25 | PDF 1.6 MB |
| Test Report BLE | Test Report | 2020-09-25 | PDF 308.6 KB |
| Test Report WLAN | Test Report | 2020-09-25 | PDF 1.9 MB |
| Test Rreport Bluetooth | Test Report | 2020-09-25 | PDF 534.8 KB |
| Test Report DFS | Test Report | 2018-12-19 | PDF 533.9 KB |
| Test Report DSS | Test Report | 2018-12-19 | PDF 2.7 MB |
| Test Report DTS Part 1 | Test Report | 2018-12-19 | PDF 5.6 MB |
| Test Report DTS Part 2 | Test Report | 2018-12-19 | PDF 4.5 MB |
| Test Report JBP | Test Report | 2018-12-19 | PDF 2.5 MB |
| Test Report UNII 2C | Test Report | 2018-12-19 | PDF 4.6 MB |
| Test Report UNII 3 | Test Report | 2018-12-19 | PDF 4.8 MB |
| Test Report UNII Part 1 | Test Report | 2018-12-19 | PDF 4.9 MB |
| Test Report UNII Part 2 | Test Report | 2018-12-19 | PDF 2.1 MB |
| Attestation Covered List | Attestation Statements | 2023-10-18 | PDF 234.7 KB |
| Attestation Service of Process | Attestation Statements | 2023-10-18 | PDF 83.8 KB |
| Passive-Scan-Attestation-AX201D2WL R2 | Attestation Statements | 2022-08-24 | PDF 224.2 KB |
| Software-Security-Letter_AX201D2WL | Attestation Statements | 2022-08-24 | PDF 1,016.5 KB |
| Passive Scan Atestation | Attestation Statements | 2020-09-25 | PDF 195.3 KB |
| Passive Scan Attestation | Attestation Statements | 2019-06-18 | PDF 195.3 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2023-10-18 | PDF 268.8 KB |
| FCC Modular Approval Letter | Cover Letter(s) | 2023-10-18 | PDF 1 MB |
| FCC Premissive Change Letter | Cover Letter(s) | 2023-10-18 | PDF 1 MB |
| Modular Letter | Cover Letter(s) | 2022-12-09 | PDF 419.5 KB |
| Premissive Change letter | Cover Letter(s) | 2022-12-09 | PDF 266.3 KB |
| Premissive Change letter | Cover Letter(s) | 2022-12-09 | PDF 292.1 KB |
| FCC - C2PC letter_AX201D2WL | Cover Letter(s) | 2022-08-24 | PDF 743.2 KB |
| Authorization Letter | Cover Letter(s) | 2020-09-25 | PDF 64.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2020-09-25 | PDF 95 KB |
| Modular Approval Letter | Cover Letter(s) | 2020-09-25 | PDF 1.3 MB |
| Permissive Change Letter | Cover Letter(s) | 2020-09-25 | PDF 42.7 KB |
| Software Security Letter | Cover Letter(s) | 2020-09-25 | PDF 404.8 KB |
| Cofidentiality Letter | Cover Letter(s) | 2019-06-18 | PDF 510.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2019-06-18 | PDF 479.4 KB |
| Permissive Change Letter | Cover Letter(s) | 2019-06-18 | PDF 441 KB |
| Cofidentiality Letter | Cover Letter(s) | 2018-12-19 | PDF 174.8 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-12-19 | PDF 153.6 KB |
| 220915-10.TR03-FCC_MPE_WLAN_UNII4_AX201D2WL_Rev01 | RF Exposure Info | 2023-10-18 | PDF 375.1 KB |
| RF Exposure SAR | RF Exposure Info | 2022-12-09 | PDF 5.4 MB |
| RF Exposure SAR | RF Exposure Info | 2022-12-09 | PDF 2.1 MB |
| RF Exposure SAR Calibrations | RF Exposure Info | 2022-12-09 | PDF 5.4 MB |
| 210209-01.TR39_FCC_UNII-4_SAR_AX201D2WL_Rev02 | RF Exposure Info | 2022-08-24 | PDF 1 MB |
| 210209-01.TR39_FCC_UNII-4_SAR_AX201D2WL_Rev02_Annex E | RF Exposure Info | 2022-08-24 | PDF 1.6 MB |
| RF Exposure MPE Report | RF Exposure Info | 2020-09-25 | PDF 187.9 KB |
| RF Exposure SAR Report | RF Exposure Info | 2019-06-18 | PDF 3.3 MB |
| RF Exposure SAR Report | RF Exposure Info | 2019-06-18 | PDF 3.3 MB |
| RF Exposure SAR Report | RF Exposure Info | 2018-12-19 | PDF 3.4 MB |
| Block Diagram Metadata only | Block Diagram | PDF 105.1 KB | |
| Schematics Metadata only | Schematics | PDF 3.3 MB | |
| Description 15.407 Metadata only | Operational Description | PDF 211.6 KB | |
| Description Antenna Sky Cross Metadata only | Operational Description | PDF 711.5 KB | |
| Description Antenna SkyCross Metadata only | Operational Description | PDF 718 KB | |
| Description BLE Metadata only | Operational Description | PDF 32.4 KB | |
| Description Bluetooth Metadata only | Operational Description | PDF 32.5 KB | |
| Description Bluetooth Metadata only | Operational Description | PDF 77 KB | |
| Description Hardware Metadata only | Operational Description | PDF 2.6 MB | |
| Description WLAN Metadata only | Operational Description | PDF 32.1 KB |
Application Information
| Application ID | i/hA95kzPZpbfAIuJbIJzw== |
|---|---|
| Final Action Date | 2023-10-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0033159344 |
| Model | AX201D2L |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Intel Wi-Fi 6 AX201 |
| Responsible Party | Benjamin Lavenant, Regulatory Engineer, benjamin.lavenant@intel.com  , 0493001400 |
| Agent | Benjamin Benjamin Benjamin, Intel Corporation, benjamin.lavenant@intel.com , 0493001400 |
| Technical Contact | Benjamin Lavenant, Intel Corporation, benjamin.lavenant@intel.com , 0493001400 |
| Non-Technical Contact | Benjamin Lavenant, Intel Corporation, benjamin.lavenant@intel.com , 0493001400 |
| Test Firm | Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/15/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| i/hA95kzPZpbfAIuJbIJzw== | 2023-10-18 | Class II permissive change or modification of presently authorized equipment |
| xyvCvQbn2spp6E3n6K4XHw== | 2022-12-09 | Class II permissive change or modification of presently authorized equipment |
| l8taBT1XOiDHRZGGVmhDWg== | 2022-12-09 | Class II permissive change or modification of presently authorized equipment |
| 1jMwTkzvaWQoTRB1hSOU0A== | 2022-08-24 | Class II permissive change or modification of presently authorized equipment |
| h5LCbrpNYcTz7dwMsx2mOg== | 2020-09-25 | Class II permissive change or modification of presently authorized equipment |
| We+rBHoR78xOm4puE7IttQ== | 2020-09-25 | Class II permissive change or modification of presently authorized equipment |
| OERyMTJIUGK2Ca4HipT/eQ== | 2020-09-25 | Class II permissive change or modification of presently authorized equipment |
| uFzEsJKO+o1RurddIInoew== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| sgAYPCodNSPMVtNWoGpETw== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| UdF9a6i4x8orrtnlWGueqQ== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| C1T6GErq4e/IpNpUVH/JRg== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| 4Arh5ntEh8iKFF6K9iiKgg== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| 0DnRWKOd/U/vRKHDBE5S3g== | 2019-06-18 | Class II permissive change or modification of presently authorized equipment |
| E+Mba5FMyng8ZRMGMbyMwQ== | 2018-12-19 | Original Equipment |
| 3mqx/t1C0WfIElC8wxpYHA== | 2018-12-19 | Original Equipment |
| 32ubmCpjLzX3gWxWQYIYEw== | 2018-12-19 | Original Equipment |
| +aVpRw3TPQOUYFWO0L+d0Q== | 2018-12-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.005 | 15C | CC |
| 2402-2480 MHz | 0.0110000 | 15C | CC |
| 2412-2472 MHz | 0.973 | 15C | CC, MO |
| 2422-2462 MHz | 0.553 | 15C | CC, MO |
| 5190-5230 MHz | 0.137 | 15E | 38, CC, MO |
| 5190-5230 MHz | 0.137 | 15E | CC, MO |
| 5190-5230 MHz | 0.129 | 15E | 38, CC, MO |
| 5210 MHz | 0.072 | 15E | 38, CC, MO |
| 5210 MHz | 0.072 | 15E | CC, MO |
| 5250 MHz | 0.041 | 15E | 38, CC, MO |
| 5250 MHz | 0.041 | 15E | CC, MO |
| 5250 MHz | 0.036 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.134 | 15E | 38, CC, MO, ND |
| 5260-5320 MHz | 0.134 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.135 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.112 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.112 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.109 | 15E | 38, CC, MO, ND |
| 5290 MHz | 0.062 | 15E | 38, CC, MO, ND |
| 5290 MHz | 0.062 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.136 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.136 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.137 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.133 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.133 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.147 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.149 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.147 | 15E | CC, MO, ND |
| 5710 MHz | 0.14 | 15E | 38, CC, MO, ND |
| 5710 MHz | 0.14 | 15E | CC, MO, ND |
| 5710 MHz | 0.132 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.109 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.103 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.109 | 15E | CC, MO, ND |
Grants
TCB Grant - Application xyvCvQbn2spp6E3n6K4XHw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/09/2022 Application Dated: 12/06/2022 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application xyvCvQbn2spp6E3n6K4XHw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/09/2022 Application Dated: 12/06/2022 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application We+rBHoR78xOm4puE7IttQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application uFzEsJKO+o1RurddIInoew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5230.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application UdF9a6i4x8orrtnlWGueqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5230.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sgAYPCodNSPMVtNWoGpETw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.124 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application OERyMTJIUGK2Ca4HipT/eQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.124 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/09/2022 Application Dated: 12/07/2022 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application l8taBT1XOiDHRZGGVmhDWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/09/2022 Application Dated: 12/07/2022 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 10/18/2023 Application Dated: 09/06/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application i/hA95kzPZpbfAIuJbIJzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 10/18/2023 Application Dated: 09/06/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application h5LCbrpNYcTz7dwMsx2mOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/25/2020 Application Dated: 09/25/2020 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless - AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E+Mba5FMyng8ZRMGMbyMwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application C1T6GErq4e/IpNpUVH/JRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 4Arh5ntEh8iKFF6K9iiKgg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3mqx/t1C0WfIElC8wxpYHA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 32ubmCpjLzX3gWxWQYIYEw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/24/2022 Application Dated: 08/12/2022 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 band. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.38 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 1jMwTkzvaWQoTRB1hSOU0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/24/2022 Application Dated: 08/12/2022 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.124 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.242 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.658 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.49 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.196 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 band. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.38 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless -AX201 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0DnRWKOd/U/vRKHDBE5S3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 06/18/2019 Application Dated: 06/18/2019 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless -AX201 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.973 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.553 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.124 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +aVpRw3TPQOUYFWO0L+d0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/19/2018 Application Dated: 12/18/2018 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX201D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.137 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| 38 CC MO | 15E | 5250.0 - 5250.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.112 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.136 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.14 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.109 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.147 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.136 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.13 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.124 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |