FCC ID PD9AX201NG

Intel WiFi 6 AX201

by Intel Corporation

Grantee Code: PD9   Product Code: AX201NG
Latest application date: 2024-03-25

FCC ID Device Details

FCC IDPD9AX201NG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePD9
Product CodeAX201NG
Applicant BusinessIntel Corporation 🇫🇷
Related Domains intel.com
Equipment ClassIntel WiFi 6 AX201
Test FirmIntel Corporation S.A.S.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-03-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-03-25
2402-2480 MHzClass II Permissive Change2024-03-25
5855 MHzClass II permissive change or modification of presently authorized equipment2023-09-13
5180-5240 MHzClass II Permissive Change2023-05-31
5855 MHzClass II permissive change or modification of presently authorized equipment2023-05-30
5180-5240 MHzClass II Permissive Change2023-05-24
5180-5240 MHzClass II Permissive Change2023-05-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-05-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-05-19
2402-2480 MHzClass II Permissive Change2023-05-19
5180-5240 MHzClass II Permissive Change2023-05-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-05-09
5180-5240 MHzClass II Permissive Change2023-05-05
2402-2480 MHzClass II Permissive Change2023-03-23
2402-2480 MHzClass II Permissive Change2023-03-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-03-23
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2023-03-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-03-22
2402-2480 MHzClass II Permissive Change2023-03-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-03-21
2402-2480 MHzClass II Permissive Change2023-03-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-10
5180-5240 MHzClass II Permissive Change2023-03-10
2402-2480 MHzClass II Permissive Change2023-02-24
5180-5240 MHzClass II Permissive Change2023-02-24
2402-2480 MHzClass II Permissive Change2023-02-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-02-13
2422-2462 MHzClass II Permissive Change2023-02-13
5775 MHzClass II Permissive Change2023-02-13
5775 MHzClass II permissive change or modification of presently authorized equipment2023-02-12
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2023-02-12
2402-2480 MHzClass II Permissive Change2023-02-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-01-17
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2023-01-17
2402-2480 MHzClass II Permissive Change2023-01-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-12-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-12-27
5180-5240 MHzClass II Permissive Change2022-12-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-12-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-12-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-12-13
5855 MHzClass II permissive change or modification of presently authorized equipment2022-12-13
5180-5240 MHzClass II Permissive Change2022-12-13
2402-2480 MHzClass II Permissive Change2022-08-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-08-15
5180-5240 MHzClass II Permissive Change2022-08-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-07-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-05-06
5180-5240 MHzClass II Permissive Change2022-05-06
2402-2480 MHzClass II Permissive Change2022-05-06
2402-2480 MHzClass II Permissive Change2022-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-22
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2022-04-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-04-22
5775 MHzClass II Permissive Change2022-04-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-04
2422-2462 MHzClass II Permissive Change2022-04-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-31
2402-2480 MHzClass II Permissive Change2022-03-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-31
2402-2480 MHzClass II Permissive Change2022-03-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-30
2402-2480 MHzClass II Permissive Change2022-03-30
2402-2480 MHzClass II Permissive Change2022-03-30
5180-5240 MHzClass II Permissive Change2022-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-29
2402-2480 MHzClass II Permissive Change2022-03-29
5180-5240 MHzClass II Permissive Change2022-03-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-23
2422-2462 MHzClass II permissive change or modification of presently authorized equipment2022-03-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-18
2402-2480 MHzClass II Permissive Change2022-03-18
2402-2480 MHzClass II Permissive Change2022-03-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-17
5180-5240 MHzClass II Permissive Change2022-03-17
2402-2480 MHzClass II Permissive Change2022-03-16
2402-2480 MHzClass II Permissive Change2022-03-16
5775 MHzClass II Permissive Change2022-03-16
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-11
2402-2480 MHzClass II Permissive Change2022-03-11
2402-2480 MHzClass II Permissive Change2022-03-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-04
2402-2480 MHzClass II Permissive Change2022-03-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-02
5180-5240 MHzClass II Permissive Change2022-03-02
2422-2462 MHzClass II Permissive Change2022-02-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-02-15
2402-2480 MHzClass II Permissive Change2022-02-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-01-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-01-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-01-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-12-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-12-15
5180-5240 MHzClass II Permissive Change2021-12-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-11-01
2402-2480 MHzClass II Permissive Change2021-11-01
2402-2480 MHzClass II Permissive Change2021-11-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-06-17
2402-2480 MHzClass II Permissive Change2021-06-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-06-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-05-24
2402-2480 MHzClass II Permissive Change2021-05-24
2402-2480 MHzClass II Permissive Change2021-05-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-05-14
2402-2480 MHzClass II Permissive Change2021-05-14
5180-5240 MHzClass II Permissive Change2021-05-14
2402-2480 MHzClass II Permissive Change2021-05-07
2402-2480 MHzClass II Permissive Change2021-05-07
5180-5240 MHzClass II Permissive Change2021-05-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-05-04
2402-2480 MHzClass II Permissive Change2021-05-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-05-04
5180-5230 MHzClass II permissive change or modification of presently authorized equipment2021-05-03
2402-2480 MHzClass II Permissive Change2021-05-03
2402-2480 MHzClass II Permissive Change2021-05-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-04-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-04-29
2402-2480 MHzClass II Permissive Change2021-04-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-04-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-04-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-04-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-04-15
2402-2480 MHzClass II Permissive Change2021-04-15
5180-5240 MHzClass II Permissive Change2021-04-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-31
2402-2480 MHzClass II Permissive Change2021-03-30
2402-2480 MHzClass II Permissive Change2021-03-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-29
5180-5240 MHzClass II Permissive Change2021-03-29
2402-2480 MHzClass II Permissive Change2021-03-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-23
2402-2480 MHzClass II Permissive Change2021-03-23
2402-2480 MHzClass II Permissive Change2021-03-23
2402-2480 MHzClass II Permissive Change2021-03-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-17
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-17
2402-2480 MHzClass II Permissive Change2021-03-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-16
5180-5240 MHzClass II Permissive Change2021-03-16
2402-2480 MHzClass II Permissive Change2021-03-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-11
2402-2480 MHzClass II Permissive Change2021-03-11
5180-5240 MHzClass II Permissive Change2021-03-11
5180-5240 MHzClass II Permissive Change2021-03-10
2402-2480 MHzClass II Permissive Change2021-03-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-03-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-22
2402-2480 MHzClass II Permissive Change2021-02-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-02-08
2402-2480 MHzClass II Permissive Change2021-02-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-02
5180-5240 MHzClass II Permissive Change2021-02-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-02-01
2402-2480 MHzClass II Permissive Change2021-02-01
5180-5240 MHzClass II Permissive Change2021-02-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-01-20
5180-5240 MHzClass II Permissive Change2021-01-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-01-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-01-06
2402-2480 MHzClass II Permissive Change2021-01-06
2402-2480 MHzClass II Permissive Change2021-01-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-01-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-01-05
2402-2480 MHzClass II Permissive Change2021-01-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-23
2402-2480 MHzClass II Permissive Change2020-12-23
5180-5240 MHzClass II Permissive Change2020-12-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-22
5180-5240 MHzClass II Permissive Change2020-12-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-10
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-11-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-11-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-10-06
2402-2480 MHzClass II Permissive Change2020-10-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-10-06

Exhibits

DocumentTypeAvailableFile
pdf_2096027_en-US-1Users Manual2024-09-22PDF 1.8 MB
pdf_5167005_en-US-1Users Manual2024-09-22PDF 1.2 MB
TempConfidential_11_EN Intel WiFi Adapter Information Guide_Draft_Rev05Users Manual2024-03-11PDF 3.4 MB
Users ManualUsers Manual2023-11-21PDF 1.3 MB
Users Manual RegulatoryUsers Manual2023-11-21PDF 160.7 KB
User ManualUsers Manual2023-09-18PDF 1.3 MB
User ManualUsers Manual2023-09-18PDF 2.5 MB
User Manual RegulatoryUsers Manual2023-09-18PDF 160.7 KB
User Manual RegulatoryUsers Manual2023-09-18PDF 155.3 KB
User ManualUsers Manual2023-09-17PDF 2.2 MB
QSGUsers Manual2023-09-07PDF 1.3 MB
unitedstates_wirelesstext_usUsers Manual2023-09-07PDF 160.7 KB
Reg. Mock.-WW-A11-QK N14 2in1Users Manual2023-08-24PDF 1.3 MB
0129 Common RN SAR project_Part 1_0210Users Manual2023-08-13PDF 5.5 MB
0129 Common RN SAR project_Part 2_0210Users Manual2023-08-13PDF 4.4 MB
Class B_Generic Notices_EN_0210Users Manual2023-08-13PDF 2.9 MB
0129 Common RN SAR project_Part 2_0210Users Manual2023-08-12PDF 4.4 MB
Class B_Generic Notices_EN_0210Users Manual2023-08-12PDF 2.9 MB
User guide 2018 (NB)Users Manual2023-07-17PDF 1.8 MB
User guide L25269-001Users Manual2023-07-17PDF 2 MB
UM (P125F001,002)Users Manual2023-06-26PDF 1.3 MB
UMUsers Manual2023-06-11PDF 1.3 MB
UM-noticeUsers Manual2023-06-11PDF 160.7 KB
Internal PhotosInternal Photos2023-11-27PDF 186 KB
Internal_Photos_AntennasInternal Photos2023-11-27PDF 139.8 KB
Internal PhotosInternal Photos2023-11-21PDF 251.9 KB
Internal_PhotosInternal Photos2023-11-21PDF 125.4 KB
Antenna report_P125F_DELL_WLAN_NB_AWAN_Internal PhotosInternal Photos2023-11-02PDF 108.9 KB
Internal PhotosInternal Photos2023-09-18PDF 251.9 KB
Internal PhotosInternal Photos2023-09-18PDF 512.9 KB
Internal PhotosInternal Photos2023-09-17PDF 165.3 KB
Internal PhotosInternal Photos2023-09-13PDF 152.8 KB
Internal photos antennasInternal Photos2023-07-17PDF 394.2 KB
P125F_DELL_WLAN_NB_AWAN_Internal PhotosInternal Photos2023-06-26PDF 108.9 KB
Internal Photo_Antenna Report_P128F_WLAN_NB_WNC_Photos_REV_1212Internal Photos2023-06-11PDF 186 KB
Riesling Label Location for FCC&IC (AX201NGW)ID Label/Location Info2024-03-25PDF 69.6 KB
240130-01.TR02_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_Sku_Rev02_Annex_FTest Setup Photos2024-09-22PDF 730.1 KB
240130-01.TR03_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_plus_Sku_Rev01_Annex_FTest Setup Photos2024-09-22PDF 652.7 KB
Riesling_TPN-W155_WLAN_Antenna Agency Report_FF+_Metal_HTK_1024_photoTest Setup Photos2024-09-22PDF 469.3 KB
Riesling_TPN-W155_WLAN_Antenna Agency Report_FF_Plastic_HTK_1024_photoTest Setup Photos2024-09-22PDF 469.4 KB
Riesling_TPN-W155_WLAN_HP (202209)_FF+_Metal_INPAQ_1025_photoTest Setup Photos2024-09-22PDF 451.5 KB
Riesling_TPN-W155_WLAN_HP (202209)_FF_Plastic_INPAQ_1025_photoTest Setup Photos2024-09-22PDF 451.5 KB
230321-08.TR01_FCC_WLAN_UNII-4_SAR_Dell_P172G_Annex_FTest Setup Photos2023-11-27PDF 751.2 KB
230321-10.TR01_FCC_WLAN_UNII-4_SAR_Dell_P128F_AnnexFTest Setup Photos2023-11-27PDF 640.1 KB
230321-04.TR01_FCC_UNII-4_SAR_Dell P171G_Annex_FTest Setup Photos2023-11-21PDF 363.8 KB
Test Setup Photos AWAN AntennaTest Setup Photos2023-11-21PDF 632.6 KB
Test Setup Photos SAR TR01Test Setup Photos2023-11-21PDF 328.9 KB
230316-06.TR01_FCC_WLAN_UNII-4_SAR_Dell_P125F_AnnexFTest Setup Photos2023-11-02PDF 307.6 KB
Test Setup Photos Antenna AWANTest Setup Photos2023-09-18PDF 1.2 MB
Test Setup Photos Antenna Data AWANTest Setup Photos2023-09-18PDF 632.6 KB
Test Setup Photos SAR TR01Test Setup Photos2023-09-18PDF 240.1 KB
Test Setup Photos SAR TR01Test Setup Photos2023-09-18PDF 335.8 KB
Test Setup Photos Antenna Data WNCTest Setup Photos2023-09-17PDF 338.9 KB
Test Setup Photos SAR TR02Test Setup Photos2023-09-17PDF 875 KB
Test Setup Photos SAR TR03Test Setup Photos2023-09-17PDF 874.6 KB
Test Setup Photos WNC AntennaTest Setup Photos2023-09-16PDF 338.9 KB
220915-10.TR07-FCC_RSE_WLAN_UNII4_AX201NGW_Dipole_rev01_PhotographsTest Setup Photos2023-09-13PDF 524.5 KB
221025-08.TR01_WLAN_SAR_Dell_P171G_Rev01_AnnexFTest Setup Photos2023-09-07PDF 592.3 KB
P171G_DELL_Regulatory report_NB_WNC_10_rev4_20221023_PhotosTest Setup Photos2023-09-07PDF 475.8 KB
221025-06.TR01_FCC_IC_WLAN_SAR_Dell_P172G_Annex_FTest Setup Photos2023-08-24PDF 736.4 KB
P172G_WLAN Antenna report_NB_WNC_20221024_N_rev4_PhotosTest Setup Photos2023-08-24PDF 629.1 KB
221125-06.TR01_FCC_IC_WLAN_Legacy_Lenovo_300w_Yoga_Gen_4_WAX201NGW_Rev01_Annex_FTest Setup Photos2023-08-13PDF 491.8 KB
WLAN Antenna Info-Lenovo 300w Yoga Gen 4 (WLAN SKU)_AWAN_20221031_PhotosTest Setup Photos2023-08-13PDF 542.7 KB
WLAN Antenna Info-Lenovo 300w Yoga Gen 4 (WLAN SKU)_High-tek_20221031_photosTest Setup Photos2023-08-13PDF 563.6 KB
221125-07.TR01_FCC_IC_WLAN_Lenovo_500w_Yoga_Gen4_Rev01_Annex_FTest Setup Photos2023-08-12PDF 605.2 KB
WLAN Antenna Info-Lenovo 500w Yoga Gen 4_AWAN_20221031_photosTest Setup Photos2023-08-12PDF 494.8 KB
WLAN Antenna Info-Lenovo 500w Yoga Gen 4_High-tek_20221031_PhotosTest Setup Photos2023-08-12PDF 519.6 KB
221107-02.TR01_FCC_IC_HP_TPN-Q289_AX201NGW_Rev01_Annex FTest Setup Photos2023-07-17PDF 343.5 KB
Mockingbird 3.0_TPN-Q289_WLAN Antenna Agency Report_HTK_photosTest Setup Photos2023-07-17PDF 327.1 KB
Mockingbird 3.0_TPN-Q289_WLAN Antenna Agency Report_WNC_photosTest Setup Photos2023-07-17PDF 228.4 KB
220906-03.TR01-FCC-IC_WLAN_SAR_Dell_P125F_AX201NGW_Rev01_AnnexF (photoTest Setup Photos2023-06-26PDF 754.9 KB
Antenna report_P125F_DELL_WLAN_NB_AWAN_PhotosTest Setup Photos2023-06-26PDF 398.6 KB
220906-05.TR01_FCC-IC_WLAN_SAR_Dell_P128F_AX201NGW_Rev01_Annex FTest Setup Photos2023-06-11PDF 1.1 MB
Antenna Report_P128F_DELL_Quake 16 2in1_WLAN_NB_WNC_Photos_REVTest Setup Photos2023-06-11PDF 186 KB
Riesling_TPN-W155_WLAN_Antenna Agency Report_FF+_HTK_240320_compressed-1Test Report2024-03-25PDF 1.9 MB
Riesling_TPN-W155_WLAN_Antenna Agency Report_FF_HTK_240320_compressed-1Test Report2024-03-25PDF 1.9 MB
Riesling_TPN-W155_WLAN_HP (202209)_FF+_INPAQ_240320_compressed-1Test Report2024-03-25PDF 1.8 MB
Riesling_TPN-W155_WLAN_HP (202209)_FF_INPAQ_240320_compressed-1Test Report2024-03-25PDF 1.8 MB
220915-10.TR07-FCC_RSE_WLAN_UNII4_AX201NGW_Dipole_rev01Test Report2023-09-13PDF 466.7 KB
Dipole Antenna report _Rev00_ARY121-0009-002-H0_Rev1.0Test Report2023-09-13PDF 2.4 MB
Attestation Letter Per KDB 986446_2.911(d)(5)_PD9AX201NGAttestation Statements2024-03-25PDF 247.1 KB
FCC Agent for Service of Process Intel - BL-RP October 26 2023Attestation Statements2024-03-25PDF 95.1 KB
Attestation Covered ListAttestation Statements2023-09-13PDF 234.7 KB
Attestation Service of ProcessAttestation Statements2023-09-13PDF 83.8 KB
Attestation Letter Per KDB 986446 r3_PD9AX201NG_121Attestation Statements2023-05-31PDF 488.7 KB
Attestation Letter Per KDB 986446 r3_PD9AX201NG_119Attestation Statements2023-05-30PDF 488.7 KB
FCC Agent for Service of Process Intel - BL-RP July 24 2023Attestation Statements2023-05-24PDF 83.8 KB
C2PC letter_AX201NGWCover Letter(s)2024-03-25PDF 1.3 MB
FCC_Confidentiality_207Cover Letter(s)2024-03-25PDF 734.8 KB
Intel_DPCSA_Declaration - RevDCover Letter(s)2024-03-25PDF 212 KB
FCC Confidentiality LetterCover Letter(s)2023-09-13PDF 226.1 KB
FCC Modular Approval LetterCover Letter(s)2023-09-13PDF 1 MB
Premissive Change LetterCover Letter(s)2023-09-13PDF 964.2 KB
C2PC letter_AX201NGW_121Cover Letter(s)2023-05-31PDF 477.3 KB
FCC-Modular-Letter-AX201NGW_121Cover Letter(s)2023-05-31PDF 337.8 KB
FCC_Confidentiality_121Cover Letter(s)2023-05-31PDF 330.9 KB
C2PC letter_AX201NGW_119_Rev01Cover Letter(s)2023-05-30PDF 345.8 KB
FCC-Modular-Letter-AX201NGW_119Cover Letter(s)2023-05-30PDF 337.8 KB
FCC_Confidentiality_119Cover Letter(s)2023-05-30PDF 330.9 KB
DPCSA DeclarationCover Letter(s)2023-05-24PDF 165.9 KB
Permissive Change Letter Rev 01Cover Letter(s)2023-05-24PDF 368.4 KB
US Agent Letter for Service of Process_07-24-2023Cover Letter(s)2023-05-24PDF 83.8 KB
240130-01.TR01 - HP TPN-W155 Gsensor Rev02RF Exposure Info2024-03-25PDF 558.6 KB
240130-01.TR02_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_Sku_Rev02RF Exposure Info2024-03-25PDF 1.7 MB
240130-01.TR02_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_Sku_Rev02_Annex_ERF Exposure Info2024-03-25PDF 3.5 MB
240130-01.TR03_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_plus_Sku_Rev01RF Exposure Info2024-03-25PDF 1.7 MB
240130-01.TR03_FCC_IC_WLAN_SAR_Legacy_HP_TPN-W155_FF_plus_Sku_Rev01_Annex_ERF Exposure Info2024-03-25PDF 1.9 MB
240130-01.TR04_FCC_WLAN_TAS_HP_TPN-W155RF Exposure Info2024-03-25PDF 525.3 KB
220915-10.TR01-FCC_MPE_WLAN_UNII4_AX201NGW_Rev01RF Exposure Info2023-09-13PDF 374.9 KB
230321-10.TR01_FCC_WLAN_UNII-4_SAR_Dell_P128FRF Exposure Info2023-05-31PDF 1 MB
230321-10.TR01_FCC_WLAN_UNII-4_SAR_Dell_P128F_AnnexERF Exposure Info2023-05-31PDF 1.6 MB
230321-08.TR01_FCC_WLAN_UNII-4_SAR_Dell_P172GRF Exposure Info2023-05-30PDF 1,017.3 KB
230321-08.TR01_FCC_WLAN_UNII-4_SAR_Dell_P172G_Annex_ERF Exposure Info2023-05-30PDF 1.6 MB

Application Information

Application IDW12vXoTxgDNRNiII7iYbew==
Final Action Date2024-03-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0033159344
ModelAX201NG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIntel WiFi 6 AX201
Responsible PartyBenjamin Lavenant, Regulatory Engineer, benjamin.lavenant@intel.com , 0493001400
Test FirmNawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962
TCB EmailQA65@sporton-usa.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/22/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC establishes portable category SAR conditions for the HP model TPN-W155 Convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.46 W/kg and 1.57 W/kg respectively.

Applications

Application IDDatePurpose
W12vXoTxgDNRNiII7iYbew==2024-03-25Class II permissive change or modification of presently authorized equipment
SZFQexf825yZQPqfF/sGqw==2024-03-25Class II permissive change or modification of presently authorized equipment
BlZDX85CkYgEX6324e1GIw==2024-03-25Class II Permissive Change
o9BMK3gwug75KUZER4NHew==2023-09-13Class II permissive change or modification of presently authorized equipment
+ZpH49SCutH5bXzy9SVmxQ==2023-05-31Class II Permissive Change
LmdfY5A+S9gK00VdT6ICKg==2023-05-30Class II permissive change or modification of presently authorized equipment
hpHWBoiqJcEXds+w6RANQA==2023-05-24Class II Permissive Change
FWILMw3lwgbAsPcveepHbA==2023-05-24Class II Permissive Change
nuOQ2JHkIhQif4aTYVN5GA==2023-05-19Class II permissive change or modification of presently authorized equipment
U+qGIC4Q531pSIzyZcQIyA==2023-05-19Class II permissive change or modification of presently authorized equipment
J7q2c8z7ByXNwXjwo9ma5w==2023-05-19Class II Permissive Change
JG5t1zI1gZPCbMuK2YUF9g==2023-05-17Class II Permissive Change
qpP78pOQ3DCxFtbipMYelw==2023-05-09Class II permissive change or modification of presently authorized equipment
jzJtxHTkf1sgCvac5bNwQg==2023-05-05Class II Permissive Change
e2RI5VgkgS/8kNNk9FZNtQ==2023-03-23Class II Permissive Change
ddkdEduDt7yFGqNFvglHBg==2023-03-23Class II Permissive Change
N/07OCYmRmy5zZRMcKnX7w==2023-03-23Class II permissive change or modification of presently authorized equipment
y07zrNbo+AB+Q4eJETX8KA==2023-03-22Class II permissive change or modification of presently authorized equipment
YSD08yY5MZvLioC1k+jKaQ==2023-03-22Class II permissive change or modification of presently authorized equipment
35fCTPALDAYsEVoKuXLsng==2023-03-22Class II Permissive Change
suyPsD8y2X+LiaNT+1lcmQ==2023-03-21Class II permissive change or modification of presently authorized equipment
lVRDp01XsguAn01/u0d/nQ==2023-03-21Class II permissive change or modification of presently authorized equipment
iO6i1UD47h4eXsnHXjYPXg==2023-03-21Class II Permissive Change
w9Nm1wrkoZ+IDP2IJ8k3YA==2023-03-10Class II permissive change or modification of presently authorized equipment
pBrBh3PJ+yArN2UX2l2jrQ==2023-03-10Class II permissive change or modification of presently authorized equipment
fOWDdYQ9aLVFtYcVjGt78Q==2023-03-10Class II Permissive Change
k1bM5qGx0N7trg6ObBFX4Q==2023-02-24Class II Permissive Change
ER3U8P7WN4vvEsNwbS9bPA==2023-02-24Class II Permissive Change
0oGPOn+NhnXCVpr3pKWSqQ==2023-02-24Class II Permissive Change
lLyywtDmPNLVnYBKL8QJ9w==2023-02-13Class II permissive change or modification of presently authorized equipment
dIhgQu2xTbatVU7EOaGBtw==2023-02-13Class II Permissive Change
brwMQ5znygkOb6zRsAiJRQ==2023-02-13Class II Permissive Change
SUIg3JVTe4DCQC3nblhgmQ==2023-02-12Class II permissive change or modification of presently authorized equipment
LMPZxPS5YxzO2tCM2F0RsQ==2023-02-12Class II permissive change or modification of presently authorized equipment
CtT9Te/uRGhtgYCYYS7i1g==2023-02-12Class II Permissive Change
XlVsyFX/MKgDwkZycfcn9A==2023-01-17Class II permissive change or modification of presently authorized equipment
QdBQ0NFXxjfzOeBVGFHCJg==2023-01-17Class II permissive change or modification of presently authorized equipment
CKp2g+1fwt4vg8k0hEIx2Q==2023-01-17Class II Permissive Change
ZkZufLmhIF7QHrMjZouuRA==2022-12-27Class II permissive change or modification of presently authorized equipment
YsFI9gkEg2B8cmiX/9A38Q==2022-12-27Class II permissive change or modification of presently authorized equipment
Jh+Hf2yLlDETpzGm0WkgTA==2022-12-27Class II Permissive Change
qjA/HceTrbUIsMmjpNOdtg==2022-12-13Class II permissive change or modification of presently authorized equipment
ppEPuGNbw+ufPc4R5fF1Gg==2022-12-13Class II permissive change or modification of presently authorized equipment
l9wLvo3kgmWXUJ+YO4k8Tg==2022-12-13Class II permissive change or modification of presently authorized equipment
VGkbicBEucC7MNZTmw2uSg==2022-12-13Class II permissive change or modification of presently authorized equipment
HpmZi6SChoDr4l2PCm0flg==2022-12-13Class II Permissive Change
fNYkSUvdHZdVmRDBwC5bhA==2022-08-15Class II Permissive Change
UMqcFFgRa7yuyhZMhltwJA==2022-08-15Class II permissive change or modification of presently authorized equipment
/xW0BfGkKUkJVDpQXxztpQ==2022-08-15Class II Permissive Change
OB5dOi7J8QeUOyw7MRl5+g==2022-07-08Class II permissive change or modification of presently authorized equipment
qbyqbayF1yPH0vBSqhoysA==2022-05-06Class II permissive change or modification of presently authorized equipment
V6ByGY9bb6YWRU25e8vcSg==2022-05-06Class II permissive change or modification of presently authorized equipment
Pt7EByzFeojbYDJ/xdCG1A==2022-05-06Class II permissive change or modification of presently authorized equipment
AID2+RG3s6JocNiMILQBEQ==2022-05-06Class II Permissive Change
4dHyQrmA9mPH2L8CmFLAIQ==2022-05-06Class II Permissive Change
+7qvKu/EUAbZ84NVSxPIrA==2022-05-06Class II Permissive Change
nPHOD/4uyLu3VP/OckpAdw==2022-04-22Class II permissive change or modification of presently authorized equipment
WPdgJSIkprnrUjKf+URCGQ==2022-04-22Class II permissive change or modification of presently authorized equipment
SYUhQxuXli+tSxETF7W/RQ==2022-04-22Class II permissive change or modification of presently authorized equipment
czI4VZTgnxtDbmvskkOiHA==2022-04-04Class II Permissive Change
Yunpfod5m7MKCyUsnfdfoA==2022-04-04Class II permissive change or modification of presently authorized equipment
IcJe4q0k4fRUrGetpTrqWQ==2022-04-04Class II Permissive Change
y0EdyOJoEP3kMF0zdnbcTQ==2022-03-31Class II permissive change or modification of presently authorized equipment
twjfpGHxgPbIqgNyvzVmVA==2022-03-31Class II permissive change or modification of presently authorized equipment
oj9tJmLJmsAJJvvvKlbQ5g==2022-03-31Class II permissive change or modification of presently authorized equipment
f+EDGUmEAvYqLa87tKqXeQ==2022-03-31Class II Permissive Change
SM4/AdftI3lovutpTysSlw==2022-03-31Class II permissive change or modification of presently authorized equipment
JU55eDVoGMIStxUIm7VS9Q==2022-03-31Class II Permissive Change
WT5oQ1kIxrNYUzoK65CpwA==2022-03-30Class II permissive change or modification of presently authorized equipment
SwvWz+T7FFT5U+5E591sfA==2022-03-30Class II permissive change or modification of presently authorized equipment
RplbqPGmLc+BqCr1GSGlhg==2022-03-30Class II permissive change or modification of presently authorized equipment
JKu9BW4IRWzR5MWLR9fs/g==2022-03-30Class II Permissive Change
CqwGe6hiyIkjezlwB8+6Og==2022-03-30Class II Permissive Change
6gcQ6OUkN7JXD86uW0GO1w==2022-03-30Class II Permissive Change
Phke+3CO7pZeKWDyqpPwjA==2022-03-29Class II permissive change or modification of presently authorized equipment
B0ZPrcLNvNDdGY1rsRG9xw==2022-03-29Class II Permissive Change
0V6AFeMdxD7UBNqXzJTtLg==2022-03-29Class II Permissive Change
ufY/DcfPHXiLB0Ut5o/yOA==2022-03-23Class II permissive change or modification of presently authorized equipment
WmtQFxIIAL8x1CJX/tUHbQ==2022-03-23Class II permissive change or modification of presently authorized equipment
RSBvOJw8DoQPh1T89FU4oQ==2022-03-23Class II permissive change or modification of presently authorized equipment
tVNhmor7T6AFR/LheXx75w==2022-03-18Class II permissive change or modification of presently authorized equipment
qczLyYrworyQEIWIxInPuA==2022-03-18Class II permissive change or modification of presently authorized equipment
9fgxOkx6uZ2szlEExdhsig==2022-03-18Class II Permissive Change
cd9/Rn5f6YOgYaR6HpLMOQ==2022-03-17Class II Permissive Change
Tk7mdoPJq4Xto1B/0EpNIA==2022-03-17Class II permissive change or modification of presently authorized equipment
G723beA8JC5xLRouqGIItg==2022-03-17Class II Permissive Change
eORtALl/lF0FYxFz+Xu2YQ==2022-03-16Class II Permissive Change
7/aT7JdefuLy6nD1dEwr5w==2022-03-16Class II Permissive Change
2sVswvyC2iMM+Vw/eGuyag==2022-03-16Class II Permissive Change
lSWjFO0wdTdzmFlIpYXdkQ==2022-03-11Class II permissive change or modification of presently authorized equipment
HarBm0XS7igFLRsGKxhojw==2022-03-11Class II Permissive Change
BY0d8Vn594hZe0RKWZ5myA==2022-03-11Class II Permissive Change
YT9pU2z0YY+W5o8JraVvQw==2022-03-04Class II permissive change or modification of presently authorized equipment
NCinVu5P45p3M/9gNuy+Pg==2022-03-04Class II permissive change or modification of presently authorized equipment
EQ82irZ5cSLj2iVf9zoscA==2022-03-04Class II Permissive Change
ms3Ofq/GUYSgU0g/du7LGA==2022-03-02Class II permissive change or modification of presently authorized equipment
kXyN1aNagEFjaW7v76xbBA==2022-03-02Class II permissive change or modification of presently authorized equipment
8gE0lxBk8kjcG7j05L/+rg==2022-03-02Class II Permissive Change
bManJqPzt7ROK+0LVTnWWg==2022-02-15Class II Permissive Change
LJ6vM8UXiNhkzoiOzaslyA==2022-02-15Class II permissive change or modification of presently authorized equipment
EKfLGLvmeQTzngJLAvWZPQ==2022-02-15Class II Permissive Change
uC1BW4I5m1mCJES192Ccgw==2022-02-14Class II permissive change or modification of presently authorized equipment
mz202Y+KBSGyNfKzcEk/0Q==2022-02-14Class II permissive change or modification of presently authorized equipment
W+F0DC72J0o1UwMzCzjhaQ==2022-02-14Class II permissive change or modification of presently authorized equipment
tnEb+EvGJ57sGJS3KcC+4A==2022-01-28Class II permissive change or modification of presently authorized equipment
kZgtzencslZtcEmwOGvEdA==2022-01-28Class II permissive change or modification of presently authorized equipment
SwN/PpYmsLZEvbmEPD0iLQ==2022-01-28Class II permissive change or modification of presently authorized equipment
ujGIvS1VRznbkv1eVbz/yA==2021-12-15Class II permissive change or modification of presently authorized equipment
STVXe83EpIEq4rLBNVDM1A==2021-12-15Class II permissive change or modification of presently authorized equipment
Ezw+IJuvSXVJPhSS7SIF6g==2021-12-15Class II Permissive Change
zhmSIlBerj5P3/3vSipkiA==2021-11-01Class II permissive change or modification of presently authorized equipment
4gTo9udqhNToNs18N9WwGA==2021-11-01Class II Permissive Change
46lGnc5iLdcALKNRT3znjw==2021-11-01Class II Permissive Change
yZ6wZPb3kjF+np8gRqzwZQ==2021-06-17Class II permissive change or modification of presently authorized equipment
iPZywqwkiGjUfjmIDCSyZA==2021-06-17Class II Permissive Change
UmfCjJtC9LcFffcX1Kw6Mg==2021-06-17Class II permissive change or modification of presently authorized equipment
s4a2UgdCGCR4onKjFlhQuA==2021-05-24Class II permissive change or modification of presently authorized equipment
HNdqVFhMh4MlDhF60mReXg==2021-05-24Class II Permissive Change
AUhKws0NzcSoq6NVLh6kWA==2021-05-24Class II Permissive Change
wBXQmqrW5mgxK5448IetVg==2021-05-14Class II permissive change or modification of presently authorized equipment
gDauJUNriZx6J7mEGZ5ztA==2021-05-14Class II Permissive Change
41dlAwqZCcwTMeL4/egBxA==2021-05-14Class II Permissive Change
hmeBFVmTfRyc8TTVFPIsPA==2021-05-07Class II Permissive Change
bGQzlLE2UpZt1Y98Hz+W2Q==2021-05-07Class II Permissive Change
FyR2yjSBVVI0X2zCvS2cWQ==2021-05-07Class II Permissive Change
wT97upTnSruOoU5VxxK+Rg==2021-05-04Class II permissive change or modification of presently authorized equipment
k/PY3oPr084EuCiRMwFGVQ==2021-05-04Class II Permissive Change
W9Qmee2smYz4YbYCuSt/tg==2021-05-04Class II permissive change or modification of presently authorized equipment
P0VbNfvvX7qSdwX08Pr8mQ==2021-05-03Class II permissive change or modification of presently authorized equipment
ED44DgCAZavROiIKk/0FTA==2021-05-03Class II Permissive Change
8GYwb8RwsTBd4x/oRc3gCQ==2021-05-03Class II Permissive Change
w5lYqeMsoYrZ7tMmU9kRXA==2021-04-29Class II permissive change or modification of presently authorized equipment
ZpDg5qeTTblcYMLiRuWz5w==2021-04-29Class II permissive change or modification of presently authorized equipment
GUerbvpnau7UJTQpil5pCg==2021-04-29Class II Permissive Change
w4t16CTiWcEPuNNZJnwCoQ==2021-04-28Class II permissive change or modification of presently authorized equipment
Y/HPYhobkAAyBrLP/lsXvg==2021-04-28Class II permissive change or modification of presently authorized equipment
W+f5//F06zrcFsHR9uHzZg==2021-04-28Class II permissive change or modification of presently authorized equipment
nWGueQU4mWdwEdIqZmpdRw==2021-04-15Class II permissive change or modification of presently authorized equipment
aSdD7UFwloYrzNWE6s+F0w==2021-04-15Class II Permissive Change
0JX10t+QGmrUtKaAtIhbsw==2021-04-15Class II Permissive Change
p8RCgs4wjzq9hRI9sILpdw==2021-03-31Class II permissive change or modification of presently authorized equipment
Zx9M/xCVn0G+I5Qw7Hnvaw==2021-03-31Class II permissive change or modification of presently authorized equipment
S2vtxgNYv+PPGM282CvpEA==2021-03-31Class II permissive change or modification of presently authorized equipment
dwN+ZBN3rSh2oUrk9EEslw==2021-03-30Class II Permissive Change
bmU2Y8ZBevDUqE3vFXFRmg==2021-03-30Class II Permissive Change
TdMx1MfKEfIdONhWmutr3w==2021-03-30Class II permissive change or modification of presently authorized equipment
vQON1i78yweZo0LBAHMxAA==2021-03-29Class II permissive change or modification of presently authorized equipment
ErIJYDKLgzd5rGxgckmzEQ==2021-03-29Class II Permissive Change
28yX5frEBVtkt+MUOl72cQ==2021-03-29Class II Permissive Change
miANyFA7hyX5hsqNPSZ7QQ==2021-03-23Class II permissive change or modification of presently authorized equipment
jcgGUWFpSBJYK7mahqKWEQ==2021-03-23Class II Permissive Change
gvGs5Z73Me8alL9nj5klMQ==2021-03-23Class II Permissive Change
cA3K2+NGeLSRQhHeCgFv2A==2021-03-23Class II Permissive Change
YiGkyA3AgCicX+ySA0fXuQ==2021-03-23Class II permissive change or modification of presently authorized equipment
NZkffhlLuEkGxhA5iNsmwg==2021-03-23Class II permissive change or modification of presently authorized equipment
vJuxJiFdSGj6jNUkq3kYnQ==2021-03-17Class II permissive change or modification of presently authorized equipment
oq7XvLnWhzP7U8Tfi2DjEw==2021-03-17Class II permissive change or modification of presently authorized equipment
KeA0bLdfNnTMNbe8zFKF8g==2021-03-17Class II Permissive Change
sLKQAMIkj+LmdsD+nygfjA==2021-03-16Class II permissive change or modification of presently authorized equipment
AmzwhstiarSYNHM+pzLLFA==2021-03-16Class II Permissive Change
/eANnlknzu3luhPBGya2MA==2021-03-16Class II Permissive Change
kNigfxZAhJxDVKbZ4TLDvg==2021-03-11Class II permissive change or modification of presently authorized equipment
B+wmO+ivjzhnpGjWH9h93g==2021-03-11Class II Permissive Change
8/mZepJldj6MMeQ/lVUyeA==2021-03-11Class II Permissive Change
jSqzEcu9PX3KdTGoHRH54w==2021-03-10Class II Permissive Change
eivZ6tcxp3vz4bqGslDH9w==2021-03-10Class II Permissive Change
MuLvd+hQzIxXDbfxTob84Q==2021-03-10Class II permissive change or modification of presently authorized equipment
rHpV+TYQoyq2KvYDzkWvtQ==2021-02-22Class II permissive change or modification of presently authorized equipment
qBehfYcrLYoFKEe1skCiZg==2021-02-22Class II permissive change or modification of presently authorized equipment
EH7NjJC8WT7wSGxZ4B3kNw==2021-02-22Class II Permissive Change
Xqh2r+W7hOYJx5DWXqFMsA==2021-02-08Class II permissive change or modification of presently authorized equipment
XXQUcWI67VJuYWCUScdQJQ==2021-02-08Class II permissive change or modification of presently authorized equipment
BkZ8RmTnvu/mFHmzBgAwnQ==2021-02-08Class II Permissive Change
lEHkDoSnMfE7ssYFgYxa/Q==2021-02-02Class II permissive change or modification of presently authorized equipment
Ve5mtX5Ydyo2Axz76UyPXg==2021-02-02Class II permissive change or modification of presently authorized equipment
5Elrz1jcn2hgehscDL+T4A==2021-02-02Class II Permissive Change
NeSKWvyPMogCgd9PCgkfDQ==2021-02-01Class II permissive change or modification of presently authorized equipment
F/Z0/euCaGle7W1dASLFAA==2021-02-01Class II Permissive Change
AsB2nRlUgVXRD0CGu+I0ug==2021-02-01Class II Permissive Change
wVLMUiKPiNmIlrz14byhnw==2021-01-20Class II permissive change or modification of presently authorized equipment
fGVz6Hit1ptIr57DWXP2aA==2021-01-20Class II Permissive Change
VQL+zxz1AuoEzPKhGraPhA==2021-01-20Class II permissive change or modification of presently authorized equipment
wPOgXeoaeStBSMRJ1MLrLQ==2021-01-06Class II permissive change or modification of presently authorized equipment
8vNAHhltC5NY67+RFqGjdA==2021-01-06Class II Permissive Change
/mO3/Gb/D4+yqhULUhNruQ==2021-01-06Class II Permissive Change
vRqMHAyPhlxROIRN8YBZYQ==2021-01-05Class II permissive change or modification of presently authorized equipment
WObYiraBRemS2DwkGySgpQ==2021-01-05Class II permissive change or modification of presently authorized equipment
7z7KqfN7ir2V3b8WfGLaaw==2021-01-05Class II Permissive Change
R83Jqz7yeKh582xYxKN7vQ==2020-12-23Class II permissive change or modification of presently authorized equipment
6uTfkaMBE57BPLdvwuqjIA==2020-12-23Class II Permissive Change
5zUDD7Vs+pQt3HzNANUauA==2020-12-23Class II Permissive Change
xB+snwAsqaWrj2r/yzRtVQ==2020-12-22Class II permissive change or modification of presently authorized equipment
aBOmTND9ki2gUGhKmbmS6g==2020-12-22Class II Permissive Change
VxvmWA8V9r42Z5A1mjARhQ==2020-12-22Class II permissive change or modification of presently authorized equipment
zJTNUp83sWuka68DLs4jkg==2020-11-10Class II permissive change or modification of presently authorized equipment
z2Rzi6mP5F9sNHSI/LQPyw==2020-11-10Class II permissive change or modification of presently authorized equipment
Y/JBAqRwWMPSyup3SyvBvg==2020-11-10Class II permissive change or modification of presently authorized equipment
z1ywjj11L3TVit6cgFuXqQ==2020-10-06Class II permissive change or modification of presently authorized equipment
aVa0D3iKDbBVlc5a5Dribw==2020-10-06Class II Permissive Change
LcJRRK17tx9yP1LJyOCjKg==2020-10-06Class II permissive change or modification of presently authorized equipment
zxhMarkzGojmM+qgSrYNTg==Class II permissive change or modification of presently authorized equipment
zv8u5jp1XgEzHEnzrvcp5g==Class II permissive change or modification of presently authorized equipment
znxH6Hj3fs0FOe8KiN+vIg==Class II permissive change or modification of presently authorized equipment
zgUfDM0iSwzTyh9O4clJRg==Class II permissive change or modification of presently authorized equipment
zYJ2q0SpBesydJug2LGlGA==Class II permissive change or modification of presently authorized equipment
ypFBsu1ad09lOxslZnkkLA==Class II permissive change or modification of presently authorized equipment
y8ipN4OVu1Ri6TvYa/LL5Q==Original Equipment
wedZmGcm4uK0NBUx2HWaFQ==Class II permissive change or modification of presently authorized equipment
wNt0qbmKeI17WlHfMHt4bQ==Class II permissive change or modification of presently authorized equipment
vqzF/Yv32+ukAKv8WnzUhw==Class II permissive change or modification of presently authorized equipment
vTMQ7gytw+wP3i2s0fJt1A==Class II permissive change or modification of presently authorized equipment
thwS1lwwUGYb7wZvi7WLhA==Original Equipment
tG7kT4zbPZumX7PtRwO0xw==Class II permissive change or modification of presently authorized equipment
rD7yp3zcqzTEf10RXM989g==Class II permissive change or modification of presently authorized equipment
r3N2cpr0uKf1vCbHY6tOxg==Class II permissive change or modification of presently authorized equipment
qwb/aNBsvEjDYuQ2PYl5EA==Class II permissive change or modification of presently authorized equipment
qoTXW4jhewaD3ChEBtptZw==Class II permissive change or modification of presently authorized equipment
qeLkgJw1PFcNA63MHQ7k+g==Class II permissive change or modification of presently authorized equipment
qYfWmOdB4hCLFWRBdGZFOg==Class II permissive change or modification of presently authorized equipment
qTpB35ONuZ4jKrNolBRWLw==Class II permissive change or modification of presently authorized equipment
qLA7mpWFHo70P3guOoG8Dg==Class II permissive change or modification of presently authorized equipment
poX/D+Kztow5PzhPXTp/xA==Class II permissive change or modification of presently authorized equipment
peaWEy++73NP+t5zFmWxSQ==Class II permissive change or modification of presently authorized equipment
pTl/tciDUXLRJr1U+rrVHA==Class II permissive change or modification of presently authorized equipment
pFySAlc7fhhQfU8STfHePw==Class II permissive change or modification of presently authorized equipment
p/F06MQM/XIqu+S5lKjfWQ==Class II permissive change or modification of presently authorized equipment
om/GveQ0c6081yBYDeBw5w==Class II permissive change or modification of presently authorized equipment
oE2q0uS6fJpVnsqdfzFNiA==Class II permissive change or modification of presently authorized equipment
o5LmWXII3/ACS7NiR3b+VQ==Class II permissive change or modification of presently authorized equipment
o+WAzEkTpcfkTz2P2Q4TwQ==Class II permissive change or modification of presently authorized equipment
ntSYpEeu5zACKw1j47x0aQ==Class II permissive change or modification of presently authorized equipment
nnFh27VxaQIY5WdXuzghZg==Class II permissive change or modification of presently authorized equipment
nZzveQhGLrcHeqTyPxizBQ==Class II permissive change or modification of presently authorized equipment
nANnTXwTvuMzvTJ0YkUogA==Class II permissive change or modification of presently authorized equipment
mgJlXxWrGHf/FMpc4xi5aw==Class II permissive change or modification of presently authorized equipment
ltfO2HTY2FrfPizzWkc+Ow==Class II permissive change or modification of presently authorized equipment
lMUB6SqB3NkH19V1QrydIg==Class II permissive change or modification of presently authorized equipment
koL7/VirovCVNVRgQvawww==Class II permissive change or modification of presently authorized equipment
ZwDu/d6semcm9lnua2Ljmw==Class II permissive change or modification of presently authorized equipment
Zt+R1FCYm0d+USphxwSqrw==Class II permissive change or modification of presently authorized equipment
Zsd4TDrHMKwCrMi1p6ECMw==Class II permissive change or modification of presently authorized equipment
ZbiZy6JBgPacz+aqqz3hGw==Class II permissive change or modification of presently authorized equipment
Zb05F6NZnnOEryozZx/aXA==Class II permissive change or modification of presently authorized equipment
ZZFuaked5Mtn/SBfqaKo3w==Class II permissive change or modification of presently authorized equipment
Z5Kwnpdj+JmXn//U194/jA==Class II permissive change or modification of presently authorized equipment
YrlHC/WUJQOehUcSV6m6hw==Class II permissive change or modification of presently authorized equipment
XjsOyWtnSUCZ9IGT06l93w==Original Equipment
XSTQsz9hTkVnh/w7Ssx7jQ==Class II permissive change or modification of presently authorized equipment
XHxXu0QpNwbftEOYAwiTNA==Class II permissive change or modification of presently authorized equipment
WhHRaLC++F0AfFBPPzixAQ==Class II permissive change or modification of presently authorized equipment
Wd9vMMgCvgiYb84NuCXVGw==Class II permissive change or modification of presently authorized equipment
WYcudAgL3NTaEb/zAlUTuw==Class II permissive change or modification of presently authorized equipment
WSjwX9JZJ6L42F5AXX68pA==Class II permissive change or modification of presently authorized equipment
WJDQQV9O1p1bIUucr5MqeA==Class II permissive change or modification of presently authorized equipment
W3oONIQNqZOWZ0CfvMWJJg==Class II permissive change or modification of presently authorized equipment
Vxr5IbfKRBYfmdQ2VgIU7Q==Class II permissive change or modification of presently authorized equipment
Vx9bHAPJa98JjFaLi/ro9w==Class II permissive change or modification of presently authorized equipment
VqPQS8T8vlp2wePc2sCdDg==Class II permissive change or modification of presently authorized equipment
UvyxR4q4ReaYb8mOKJHWng==Class II permissive change or modification of presently authorized equipment
UmbwK/bIcxNJrYwynSyQpQ==Class II permissive change or modification of presently authorized equipment
USDmIA6Ael83xdyF/Ty2jA==Class II permissive change or modification of presently authorized equipment
U+9uGTAaFhO8zsA7292kmQ==Class II permissive change or modification of presently authorized equipment
TSEfj161hhVgBj53RlhMUg==Class II permissive change or modification of presently authorized equipment
T7aH+pX44saRPAr0sN+Hzg==Class II permissive change or modification of presently authorized equipment
T6JiHUdv7b3l3xg9DCJcYw==Class II permissive change or modification of presently authorized equipment
T4ONJdvsoBLwyFaByp+vlg==Class II permissive change or modification of presently authorized equipment
Su2BK/pcLA40IZOi3giWrQ==Class II permissive change or modification of presently authorized equipment
So0iyavXcDBNxU8awFEJng==Class II permissive change or modification of presently authorized equipment
SijdiBM89cRd3qz+uKPPqw==Class II permissive change or modification of presently authorized equipment
RUVAYZVRhMvajK+IJ2DJ1A==Class II permissive change or modification of presently authorized equipment
QzzYAxHYA1rTYF6908XBxw==Class II permissive change or modification of presently authorized equipment
QsPqxNaM6VUn3GRHf7o4zg==Class II permissive change or modification of presently authorized equipment
QcRBQX3W6Z0sEHBKcmApmA==Class II permissive change or modification of presently authorized equipment
QXsbTztXs4Dw5LHWbm5aJQ==Class II permissive change or modification of presently authorized equipment
PQ/WXO5WgDLex1ARxmqCUQ==Class II permissive change or modification of presently authorized equipment
P9kEoc0fMUoNtXvZg4gfLA==Class II permissive change or modification of presently authorized equipment
Nu8ZBRtZ+LztzxDQyqCTnQ==Class II permissive change or modification of presently authorized equipment
NWsqeyfFf6bCKtEGFtNBoA==Class II permissive change or modification of presently authorized equipment
NQwhLZGd/FuvXDnohsouUQ==Class II permissive change or modification of presently authorized equipment
N8oYUoqJgTaNxqWj2TdtOg==Class II permissive change or modification of presently authorized equipment
N3HYzqOsjgZDjkgcyBQgMw==Class II permissive change or modification of presently authorized equipment
N+CV/LytOWToiq34S1rxVA==Class II permissive change or modification of presently authorized equipment
Mj63mmBHI4DXPwqTz26hcg==Class II permissive change or modification of presently authorized equipment
MCoPOb8nemRoW1cUDAY37Q==Class II permissive change or modification of presently authorized equipment
Lo6Yl03WpNFknWTopqDM7w==Class II permissive change or modification of presently authorized equipment
LcpQjEneAwg01jJc0WSr+g==Class II permissive change or modification of presently authorized equipment
LU1r8w3fVhfIljG654sv5Q==Class II permissive change or modification of presently authorized equipment
LSDgpfmFHf2UuSqou+XEeA==Class II permissive change or modification of presently authorized equipment
LBveVJu0OdAUZqqqocXr4g==Class II permissive change or modification of presently authorized equipment
L47zfyfZx9WunoUv4qRhfg==Class II permissive change or modification of presently authorized equipment
KSaX1JkG0qxnxivA5wAZBw==Class II permissive change or modification of presently authorized equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.00815CCC

Grants

TCB Grant - Application ZZFuaked5Mtn/SBfqaKo3w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/13/2020

Application Dated: 08/13/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5230.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.53W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZZFuaked5Mtn/SBfqaKo3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/13/2020

Application Dated: 08/13/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5230.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.53W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application zYJ2q0SpBesydJug2LGlGA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/06/2019

Application Dated: 09/06/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.49W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-13IML, with antenna ICT part no DC33001LX00 (Tx1 and Tx2) and Speedwire part no DC33001LV00 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zYJ2q0SpBesydJug2LGlGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/06/2019

Application Dated: 09/06/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.49W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-13IML, with antenna ICT part no DC33001LX00 (Tx1 and Tx2) and Speedwire part no DC33001LV00 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application zxhMarkzGojmM+qgSrYNTg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/10/2020

Application Dated: 09/10/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.30W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I41C-5 PC with AWAN AUP6Y-100074 (Tx1) and AUP6Y-100075 (Tx2) and HongBo 260-27445 (Tx1) and 260-27444 (Tx2) antennas and WNC 81EABD15.G09 (Tx1) and 81EABD15.G08 (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zxhMarkzGojmM+qgSrYNTg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 09/10/2020

Application Dated: 09/10/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.30W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I41C-5 PC with AWAN AUP6Y-100074 (Tx1) and AUP6Y-100075 (Tx2) and HongBo 260-27445 (Tx1) and 260-27444 (Tx2) antennas and WNC 81EABD15.G09 (Tx1) and 81EABD15.G08 (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Zx9M/xCVn0G+I5Qw7Hnvaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/31/2021

Application Dated: 03/31/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.45W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P147G PC with WNC 025.901T8.0011 and 025.901T8.0011 and Hong-Bo 260-29075 and 260-29075 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Zx9M/xCVn0G+I5Qw7Hnvaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 03/31/2021

Application Dated: 03/31/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.45W/kg respectively.

This change establishes portable category SAR conditions for the Dell model P147G PC with WNC 025.901T8.0011 and 025.901T8.0011 and Hong-Bo 260-29075 and 260-29075 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ZwDu/d6semcm9lnua2Ljmw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/23/2020

Application Dated: 05/22/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.02W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I36C PC with AWAN AUP6Y-100030 (Tx1) and AUP6Y-100029 (Tx2) and HongBo 260-27370 (Tx1) and 260-27369 (Tx2) antennas and WNC 81EABB15.G38 (Tx1) and 81EABB15.G37 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZwDu/d6semcm9lnua2Ljmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/23/2020

Application Dated: 05/22/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.02W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I36C PC with AWAN AUP6Y-100030 (Tx1) and AUP6Y-100029 (Tx2) and HongBo 260-27370 (Tx1) and 260-27369 (Tx2) antennas and WNC 81EABB15.G38 (Tx1) and 81EABB15.G37 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application zv8u5jp1XgEzHEnzrvcp5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/31/2020

Application Dated: 01/31/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.48W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 14IIL05 metal sku Yageo DC33002E100 and DC33002E110 and Hightek DC33002E000 and DC33002E010 antennas.

Lenovo IdeaPad 5 14IIL05 plastic sku Yageo DC33002E120 and DC33002E130 and Hightek DC33002E020 and DC33002E030 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application zv8u5jp1XgEzHEnzrvcp5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 01/31/2020

Application Dated: 01/31/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.48W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 14IIL05 metal sku Yageo DC33002E100 and DC33002E110 and Hightek DC33002E000 and DC33002E010 antennas.

Lenovo IdeaPad 5 14IIL05 plastic sku Yageo DC33002E120 and DC33002E130 and Hightek DC33002E020 and DC33002E030 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Zt+R1FCYm0d+USphxwSqrw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/26/2019

Application Dated: 06/26/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.36W/kg respectively.

This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W144, with antenna WNC part no 81EAA415.GHE (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Zt+R1FCYm0d+USphxwSqrw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/26/2019

Application Dated: 06/26/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.36W/kg respectively.

This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W144, with antenna WNC part no 81EAA415.GHE (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Zsd4TDrHMKwCrMi1p6ECMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/09/2019

Application Dated: 05/09/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.137  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Zsd4TDrHMKwCrMi1p6ECMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/09/2019

Application Dated: 05/09/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.137  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ZpDg5qeTTblcYMLiRuWz5w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2021

Application Dated: 04/29/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.133  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.13W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 Chrome 14ITL6 PC with Luxshare-ICT DC33001U500 and INPAQ DC33001U400 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZpDg5qeTTblcYMLiRuWz5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 04/29/2021

Application Dated: 04/29/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.133  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.13W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 Chrome 14ITL6 PC with Luxshare-ICT DC33001U500 and INPAQ DC33001U400 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application znxH6Hj3fs0FOe8KiN+vIg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/27/2020

Application Dated: 04/24/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.24W/kg and 1.40W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P110G, with antenna HongBo part no 260-24222 (Tx1 and Tx2) and Speedwire part no F.0G.FH-6078-001-00 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application znxH6Hj3fs0FOe8KiN+vIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 04/27/2020

Application Dated: 04/24/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.24W/kg and 1.40W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P110G, with antenna HongBo part no 260-24222 (Tx1 and Tx2) and Speedwire part no F.0G.FH-6078-001-00 (Tx1 and Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ZkZufLmhIF7QHrMjZouuRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/27/2022

Application Dated: 12/27/2022
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This C2PC establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.39 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ZkZufLmhIF7QHrMjZouuRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 12/27/2022

Application Dated: 12/27/2022
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6 AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This C2PC establishes portable category SAR conditions for the Dell model P125F PC with AWAN 025.9025N.0011 and 025.9025O.0011 antennas. TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.39 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application zJTNUp83sWuka68DLs4jkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/10/2020

Application Dated: 11/10/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.25W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I42C PC with HongBo 6036B0284301 (Tx1) and (Tx2) antennas and WNC 6036B0283001 (Tx1) and (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zJTNUp83sWuka68DLs4jkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/10/2020

Application Dated: 11/10/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.25W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I42C PC with HongBo 6036B0284301 (Tx1) and (Tx2) antennas and WNC 6036B0283001 (Tx1) and (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application zhmSIlBerj5P3/3vSipkiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/01/2021

Application Dated: 10/29/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 1.33  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.57W/kg respectively.

This change establishes portable category SAR conditions for the HP model HSN-I47C PC with WNC 6036B0315601 and 6036B0315601 and Hong-Bo 6036B0316701 and 6036B0316701 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application zhmSIlBerj5P3/3vSipkiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/01/2021

Application Dated: 10/29/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless AX-201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 1.33  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.57W/kg respectively.

This change establishes portable category SAR conditions for the HP model HSN-I47C PC with WNC 6036B0315601 and 6036B0315601 and Hong-Bo 6036B0316701 and 6036B0316701 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application zgUfDM0iSwzTyh9O4clJRg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/13/2019

Application Dated: 08/12/2019
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.30W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P84F, with antenna HongBo part no 260-27310 (Tx1) and 260-27327 (Tx2) and WNC part no 025.901HH.0001 (Tx1) and 025.901HJ.0001 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zgUfDM0iSwzTyh9O4clJRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/13/2019

Application Dated: 08/12/2019
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless -AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.30W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Dell model number - P84F, with antenna HongBo part no 260-27310 (Tx1) and 260-27327 (Tx2) and WNC part no 025.901HH.0001 (Tx1) and 025.901HJ.0001 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ZbiZy6JBgPacz+aqqz3hGw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/13/2020

Application Dated: 08/13/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.53W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZbiZy6JBgPacz+aqqz3hGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 08/13/2020

Application Dated: 08/13/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.53W/kg respectively.

This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Zb05F6NZnnOEryozZx/aXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/23/2020

Application Dated: 05/22/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.02W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I36C PC with AWAN AUP6Y-100030 (Tx1) and AUP6Y-100029 (Tx2) and HongBo 260-27370 (Tx1) and 260-27369 (Tx2) antennas and WNC 81EABB15.G38 (Tx1) and 81EABB15.G37 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Zb05F6NZnnOEryozZx/aXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 05/23/2020

Application Dated: 05/22/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.02W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I36C PC with AWAN AUP6Y-100030 (Tx1) and AUP6Y-100029 (Tx2) and HongBo 260-27370 (Tx1) and 260-27369 (Tx2) antennas and WNC 81EABB15.G38 (Tx1) and 81EABB15.G37 (Tx2) antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Z5Kwnpdj+JmXn//U194/jA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/24/2020

Application Dated: 06/24/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Dell P100F PC with AWAN AYP6Y-200006 Tx1 and Tx2 antennas and Speed F.0G.LS-6010-003-00 Tx1 and Tx2 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Z5Kwnpdj+JmXn//U194/jA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/24/2020

Application Dated: 06/24/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.53W/kg respectively.

This change establishes portable category SAR conditions for the Dell P100F PC with AWAN AYP6Y-200006 Tx1 and Tx2 antennas and Speed F.0G.LS-6010-003-00 Tx1 and Tx2 antennas.

Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application z2Rzi6mP5F9sNHSI/LQPyw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/10/2020

Application Dated: 11/10/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.25W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I42C PC with HongBo 6036B0284301 (Tx1) and (Tx2) antennas and WNC 6036B0283001 (Tx1) and (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application z2Rzi6mP5F9sNHSI/LQPyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 11/10/2020

Application Dated: 11/10/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.133  
38 CC MO 15E 5190.0  -  5230.0 0.129  
38 CC MO 15E 5210.0  -  5210.0 0.072  
38 CC MO 15E 5250.0  -  5250.0 0.036  
38 CC MO ND 15E 5260.0  -  5320.0 0.135  
38 CC MO ND 15E 5270.0  -  5310.0 0.109  
38 CC MO ND 15E 5290.0  -  5290.0 0.062  
38 CC MO ND 15E 5500.0  -  5700.0 0.135  
38 CC MO ND 15E 5710.0  -  5710.0 0.132  
38 CC MO ND 15E 5720.0  -  5720.0 0.103  
38 CC MO ND 15E 5530.0  -  5690.0 0.149  
38 CC MO 15E 5745.0  -  5825.0 0.134  
38 CC MO 15E 5755.0  -  5795.0 0.132  
38 CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.25W/kg respectively.

This change establishes portable category SAR conditions for the HP HSN-I42C PC with HongBo 6036B0284301 (Tx1) and (Tx2) antennas and WNC 6036B0283001 (Tx1) and (Tx2) antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application z1ywjj11L3TVit6cgFuXqQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/06/2020

Application Dated: 10/06/2020
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.11W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo Thinkbook 14s Yoga ITL PC with HighTek 0ACCN020003N Tx1 and 0ACCN020004N Tx2 antennas and Southstar N12-6584-R0A Tx1 and N12-6585-R0A Tx2 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application z1ywjj11L3TVit6cgFuXqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 10/06/2020

Application Dated: 10/06/2020
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Digital Transmission System
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.986  
CC MO 15C 2422.0  -  2462.0 0.642  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.11W/kg respectively.

This change establishes portable category SAR conditions for the Lenovo Thinkbook 14s Yoga ITL PC with HighTek 0ACCN020003N Tx1 and 0ACCN020004N Tx2 antennas and Southstar N12-6584-R0A Tx1 and N12-6585-R0A Tx2 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application yZ6wZPb3kjF+np8gRqzwZQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/17/2021

Application Dated: 06/17/2021
Intel Corporation
100 Center Point Circle
Suite 200
Columbia, SC 29210
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.133  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.19W/kg respectively.

This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application yZ6wZPb3kjF+np8gRqzwZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intel Corporation
100 Center Point Circle Suite 200
Columbia, SC 29210
United States
  Date of Grant: 06/17/2021

Application Dated: 06/17/2021
 
Attention: Steven Hackett , Product Regulations Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PD9AX201NG
Name of Grantee:  Intel Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless - AX201
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.133  
CC MO 15E 5190.0  -  5230.0 0.129  
CC MO 15E 5210.0  -  5210.0 0.072  
CC MO 15E 5250.0  -  5250.0 0.036  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5270.0  -  5310.0 0.109  
CC MO ND 15E 5290.0  -  5290.0 0.062  
CC MO ND 15E 5500.0  -  5700.0 0.135  
CC MO ND 15E 5710.0  -  5710.0 0.132  
CC MO ND 15E 5720.0  -  5720.0 0.103  
CC MO ND 15E 5530.0  -  5690.0 0.149  
CC MO 15E 5745.0  -  5825.0 0.134  
CC MO 15E 5755.0  -  5795.0 0.132  
CC MO 15E 5775.0  -  5775.0 0.13  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.19W/kg respectively.

This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antennas.

Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: