FCC ID PD9AX211D2L
Intel Wi-Fi 6E AX211
by Intel Corporation
Grantee Code: PD9 Product Code: AX211D2L
Latest application date: 2022-09-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-09-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-27 |
| 5955-7115 MHz | Original Equipment | 2021-05-11 |
| 2402-2480 MHz | Original Equipment | 2021-03-18 |
| 5180-5240 MHz | Original Equipment | 2021-03-18 |
| 2402-2480 MHz | Original Equipment | 2021-03-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Intel WiFi Adapter Information Guide_5.25_Draft_Rev02 | Users Manual | 2022-09-19 | PDF 2.6 MB |
| User Manual | Users Manual | 2022-03-26 | PDF 2.4 MB |
| User Manual Metadata only | Users Manual | 2021-11-07 | PDF 2.5 MB |
| User Manual Rev 042321 | Users Manual | 2021-11-07 | PDF 208 KB |
| User Manual | Users Manual | 2021-09-14 | PDF 189 KB |
| Users Manual | Users Manual | 2021-09-14 | PDF 189 KB |
| Internal Photos_Antennas | Internal Photos | 2022-09-19 | PDF 87.7 KB |
| Internal Photos | Internal Photos | 2022-03-26 | PDF 124.9 KB |
| Internal Photos | Internal Photos | 2021-11-07 | PDF 373.8 KB |
| Internal Photos | Internal Photos | 2021-09-14 | PDF 393.5 KB |
| External Photos | External Photos | 2021-11-07 | PDF 246.8 KB |
| External Photos | External Photos | 2021-09-14 | PDF 303 KB |
| Labels and Locations | ID Label/Location Info | 2021-09-27 | PDF 124.6 KB |
| Label and Location | ID Label/Location Info | 2021-05-11 | PDF 122.3 KB |
| 210209-01.TR17 - FCC, UNII4_RF, AX211D2WL_Rev02_Photographs | Test Setup Photos | 2022-09-19 | PDF 1.1 MB |
| 210209-01.TR18_FCC_UNII-4_SAR_AX211D2WL_Rev03-Annex F | Test Setup Photos | 2022-09-19 | PDF 632.4 KB |
| Test Setup Photos RSE | Test Setup Photos | 2022-03-26 | PDF 227.9 KB |
| Test Setup Photos Radiated Spurious | Test Setup Photos | 2022-03-26 | PDF 227.9 KB |
| Test Report Radiated Spurious Emissions | Test Setup Photos | 2021-11-07 | PDF 210.8 KB |
| Test Setup Photos RF Conducted | Test Setup Photos | 2021-11-07 | PDF 399.2 KB |
| Test Setup Photos SAR | Test Setup Photos | 2021-11-07 | PDF 605.4 KB |
| Test Setup Photos BT | Test Setup Photos | 2021-09-14 | PDF 1.2 MB |
| Test Setup Photos DFS | Test Setup Photos | 2021-09-14 | PDF 255.9 KB |
| Test Setup Photos DTS BLE | Test Setup Photos | 2021-09-14 | PDF 1.2 MB |
| Test Setup Photos JBP | Test Setup Photos | 2021-09-14 | PDF 156.3 KB |
| Test Setup Photos SAR | Test Setup Photos | 2021-09-14 | PDF 657.9 KB |
| Test Setup Photos UNII 1 | Test Setup Photos | 2021-09-14 | PDF 1.2 MB |
| Test Setup Photos UNII 2 | Test Setup Photos | 2021-09-14 | PDF 1.2 MB |
| Test Setup Photos UNII 3 | Test Setup Photos | 2021-09-14 | PDF 1.2 MB |
| 210209-01.TR17 - FCC, UNII4_RF, AX211D2WL_Rev02_Part1 | Test Report | 2022-09-19 | PDF 4.1 MB |
| 210209-01.TR17 - FCC, UNII4_RF, AX211D2WL_Rev02_Part2 | Test Report | 2022-09-19 | PDF 4.8 MB |
| 210209-01.TR17 - FCC, UNII4_RF, AX211D2WL_Rev02_Part3 | Test Report | 2022-09-19 | PDF 643.9 KB |
| Intel_Ref_Antenna data_HMC-M2 Ant_Spec_Universe_SkyCross Antenna | Test Report | 2022-09-19 | PDF 718 KB |
| Test Report Radiated Spurious Emissions | Test Report | 2021-09-27 | PDF 500.8 KB |
| Test Report RF Conducted | Test Report | 2021-05-11 | PDF 5.7 MB |
| Test Report Radiated Spurious Emissions | Test Report | 2021-05-11 | PDF 673.6 KB |
| Test Report Bluetooth | Test Report | 2021-03-18 | PDF 3.5 MB |
| Test Report DFS | Test Report | 2021-03-18 | PDF 499.2 KB |
| Test Report DTS BLE Part 1 | Test Report | 2021-03-18 | PDF 4.3 MB |
| Test Report DTS BLE Part 2 | Test Report | 2021-03-18 | PDF 5.4 MB |
| Test Report DTS BLE Part 3 | Test Report | 2021-03-18 | PDF 275.3 KB |
| Test Report JBP | Test Report | 2021-03-18 | PDF 3 MB |
| Test Report UNII 1 and 2A Part 1 | Test Report | 2021-03-18 | PDF 4 MB |
| Test Report UNII 1 and 2A Part 2 | Test Report | 2021-03-18 | PDF 4 MB |
| Test Report UNII 2C Part 1 | Test Report | 2021-03-18 | PDF 4.4 MB |
| Test Report UNII 2C Part 2 | Test Report | 2021-03-18 | PDF 3.7 MB |
| Test Report UNII 3 Part 1 | Test Report | 2021-03-18 | PDF 4.7 MB |
| Test Report UNII 3 Part 2 | Test Report | 2021-03-18 | PDF 236.8 KB |
| Passive-Scan-Attestation-AX211D2WL | Attestation Statements | 2022-09-19 | PDF 281.9 KB |
| Software-Security-Letter_AX211D2WL | Attestation Statements | 2022-09-19 | PDF 1.1 MB |
| Passive Scan Attestation | Attestation Statements | 2021-09-27 | PDF 285.7 KB |
| Attestation Letter KDB 987594 | Attestation Statements | 2021-05-11 | PDF 64.2 KB |
| Passive Scan Attestation | Attestation Statements | 2021-05-11 | PDF 140.9 KB |
| Attestation Letter KDB 987594 | Attestation Statements | 2021-03-18 | PDF 87.3 KB |
| Attestation Letter LPI | Attestation Statements | 2021-03-18 | PDF 87.3 KB |
| FCC - C2PC letter_AX211D2WL | Cover Letter(s) | 2022-09-19 | PDF 353.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-09-27 | PDF 823.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2021-09-27 | PDF 295 KB |
| Premissive Change Letter | Cover Letter(s) | 2021-09-27 | PDF 598.2 KB |
| Software Security Letter | Cover Letter(s) | 2021-09-27 | PDF 386.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-05-11 | PDF 77.2 KB |
| Modular Letter | Cover Letter(s) | 2021-05-11 | PDF 69.8 KB |
| Cofidentiality Letter | Cover Letter(s) | 2021-03-18 | PDF 172.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-03-18 | PDF 172.7 KB |
| Modular Letter | Cover Letter(s) | 2021-03-18 | PDF 71.4 KB |
| 210209-01.TR18_FCC_UNII-4_SAR_AX211D2WL_Rev03 | RF Exposure Info | 2022-09-19 | PDF 1,019.6 KB |
| RF Exposure MPE | RF Exposure Info | 2021-09-27 | PDF 398.6 KB |
| RF Exposure MPE Report | RF Exposure Info | 2021-09-27 | PDF 398.6 KB |
| RF Exposure SAR Report | RF Exposure Info | 2021-05-11 | PDF 2.4 MB |
| RF Exposure SAR Report Calibrations | RF Exposure Info | 2021-05-11 | PDF 4.3 MB |
| RF Exposure SAR Report | RF Exposure Info | 2021-03-18 | PDF 4.1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 344.4 KB | |
| Schematics Metadata only | Schematics | PDF 1.8 MB | |
| Description Antenna Metadata only | Operational Description | PDF 86.7 KB | |
| Description Antenna 6GHz Metadata only | Operational Description | PDF 1.5 MB | |
| Description Antenna SkyCross Metadata only | Operational Description | PDF 86.7 KB | |
| Description Antenna Wieson Dipole Metadata only | Operational Description | PDF 2.5 MB | |
| Description Bluetooth Metadata only | Operational Description | PDF 77 KB | |
| Description Hardware Metadata only | Operational Description | PDF 1.6 MB | |
| Software Security Letter Metadata only | SDR Software/Security Inf | PDF 320.5 KB |
Application Information
| Application ID | ZFoAtftDAbxNKn0+bYSc5g== |
|---|---|
| Final Action Date | 2022-09-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | AX211D2L |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Intel Wi-Fi 6E AX211 |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Technical Contact | Steven C Hackett, Intel Mobile Communications, steven.c.hackett@intel.com , 8032162344 |
| Non-Technical Contact | Gilles Catala, Intel Corporation, gilles.catala@intel.com , +33493001400 |
| Test Firm | Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZFoAtftDAbxNKn0+bYSc5g== | 2022-09-19 | Class II permissive change or modification of presently authorized equipment |
| X+IKyitCKmRmBSgyyIPdJg== | 2021-09-27 | Class II permissive change or modification of presently authorized equipment |
| LS3HrbhdD9VzSNe8EUIHWg== | 2021-09-27 | Class II permissive change or modification of presently authorized equipment |
| 14V43SN4QN9OX0KDdUoY9A== | 2021-09-27 | Class II permissive change or modification of presently authorized equipment |
| N6rBJBfBrk+7F809nvnxxA== | 2021-05-11 | Original Equipment |
| rVJFnOML+vdKeLNB5Fcm7A== | 2021-03-18 | Original Equipment |
| qt9PXriNsMKxfaUNb0HY6g== | 2021-03-18 | Original Equipment |
| /S+g46qQ1ygdZqmEtTy1Fg== | 2021-03-18 | Original Equipment |
| /CP14yZftxVeZMUrdJii/Q== | 2021-03-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0130000 | 15C | CC |
| 2402-2480 MHz | 0.009 | 15C | CC |
| 2412-2472 MHz | 0.979 | 15C | CC, MO |
| 2422-2462 MHz | 0.742 | 15C | CC, MO |
| 5190-5230 MHz | 0.11 | 15E | CC, MO |
| 5210 MHz | 0.078 | 15E | CC, MO |
| 5250 MHz | 0.042 | 15E | CC, MO |
| 5260-5320 MHz | 0.138 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.132 | 15E | CC, MO, ND |
| 5290 MHz | 0.073 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.141 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.246 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.131 | 15E | CC, MO, ND |
| 5710 MHz | 0.12 | 15E | CC, MO, ND |
| 5720 MHz | 0.104 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.263 | 15E | CC, MO |
| 5755-5795 MHz | 0.245 | 15E | CC, MO |
| 5775 MHz | 0.176 | 15E | CC, MO |
| 5815 MHz | 0.166 | 15E | CC, MO |
| 5835-5875 MHz | 0.715 | 15E | CC, MO |
| 5845-5885 MHz | 0.321 | 15E | CC, MO |
| 5855 MHz | 0.52 | 15E | CC, MO |
| 5955-7115 MHz | 0.003 | 15E | CC, EP, MO |
| 5965-7085 MHz | 0.007 | 15E | CC, EP, MO |
| 5985-7025 MHz | 0.012 | 15E | CC, EP, MO |
| 6025-6985 MHz | 0.021 | 15E | CC, EP, MO |
Grants
TCB Grant - Application ZFoAtftDAbxNKn0+bYSc5g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/19/2022 Application Dated: 08/25/2022 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.321 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.715 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.52 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.166 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ZFoAtftDAbxNKn0+bYSc5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/19/2022 Application Dated: 08/25/2022 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.321 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.715 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.52 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.166 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application X+IKyitCKmRmBSgyyIPdJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi 6E AX211 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rVJFnOML+vdKeLNB5Fcm7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.979 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.742 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qt9PXriNsMKxfaUNb0HY6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.979 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.742 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2021 Application Dated: 04/23/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Intel Wi-Fi 6 AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.012 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.021 |
| Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.52 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 15mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application N6rBJBfBrk+7F809nvnxxA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/11/2021 Application Dated: 04/23/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Intel Wi-Fi 6 AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.012 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.021 |
| Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.52 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 15mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.979 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.742 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LS3HrbhdD9VzSNe8EUIHWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.979 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.742 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 14V43SN4QN9OX0KDdUoY9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/27/2021 Application Dated: 09/27/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2). MPE testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application /S+g46qQ1ygdZqmEtTy1Fg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.141 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.11 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.078 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.042 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.138 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.073 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.132 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.141 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.246 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.12 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.104 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.131 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.263 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.245 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /CP14yZftxVeZMUrdJii/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/18/2021 Application Dated: 03/18/2021 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9AX211D2L |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6E AX211 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.53W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |