FCC ID PD9BE200NG
Intel BE200
by Intel Corporation
Grantee Code: PD9 Product Code: BE200NG
Latest application date: 2026-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-03-04 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-03-04 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2026-03-04 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-03-04 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-12 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-12 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-12 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-12 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-12 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-12 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-10 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-10 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-10 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-18 |
| 5955-7115 MHz | Original Equipment | 2025-07-07 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-11 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-12 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-23 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-14 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-14 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-14 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-14 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-01 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-17 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-17 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-05 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-05 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-04 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-04 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-02 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-02 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-02 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-28 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-27 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-27 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-27 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-17 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-17 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-16 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-16 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-16 |
| 5955-6415 MHz | Original Equipment | 2023-09-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-23 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-23 |
| 5775 MHz | Original Equipment | 2023-08-15 |
| 2402-2480 MHz | Original Equipment | 2023-08-15 |
| 2402-2480 MHz | Original Equipment | 2023-08-15 |
Exhibits
Application Information
| Application ID | zpfWaJXIjsGXL9ovTRkYzQ== |
|---|---|
| Final Action Date | 2026-03-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0033159344 |
| Model | BE200NG |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Intel BE200 |
| Responsible Party | Benjamin Lavenant, benjamin.lavenant@intel.com  , 0493001400 |
| Non-Technical Contact | Robert W Paxman, Intel Corporation, Robert.Paxman@Intel.com , 5037128077 |
| Test Firm | Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962 |
| TCB Email | QA65@sporton-usa.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zpfWaJXIjsGXL9ovTRkYzQ== | 2026-03-04 | Class II permissive change or modification of presently authorized equipment |
| NKTUUu5H0l0i973tCLPjtw== | 2026-03-04 | Class II permissive change or modification of presently authorized equipment |
| MpWCCqGycvh6h1gyunm4vA== | 2026-03-04 | Class II permissive change or modification of presently authorized equipment |
| L6rNgzb5zuG0fCwI3wUVYw== | 2026-03-04 | Class II permissive change or modification of presently authorized equipment |
| jTPjdkNMmf/2RBTYQPXbbw== | 2026-01-12 | Class II permissive change or modification of presently authorized equipment |
| G53ni9Ph0XojCSs0VD+Q8Q== | 2026-01-12 | Class II permissive change or modification of presently authorized equipment |
| 7Xk7WHcViGXqKC2qSR6ZOA== | 2026-01-12 | Class II permissive change or modification of presently authorized equipment |
| /1yF5E78nU66DUMi75Dwtg== | 2026-01-12 | Class II permissive change or modification of presently authorized equipment |
| vRTuMyIbojraM8m4E3LTxA== | 2025-12-12 | Class II permissive change or modification of presently authorized equipment |
| MHgXlZ5DsScFGmZ1DvrgAA== | 2025-12-12 | Class II permissive change or modification of presently authorized equipment |
| IgC4m/eRb/MoaUxa4hHvhg== | 2025-12-12 | Class II permissive change or modification of presently authorized equipment |
| AcKyp77zlzongdY9UXo1Jg== | 2025-12-12 | Class II permissive change or modification of presently authorized equipment |
| kabgHlky3xR+aoAA+TnFXw== | 2025-12-10 | Class II permissive change or modification of presently authorized equipment |
| aQhhwFa6CESbkwXhRcWagA== | 2025-12-10 | Class II permissive change or modification of presently authorized equipment |
| VQtX03H7Y7Iv26IKDGMB3Q== | 2025-12-10 | Class II permissive change or modification of presently authorized equipment |
| CDE71GG14p/L084BGW2fuw== | 2025-12-10 | Class II permissive change or modification of presently authorized equipment |
| qCrMbXuwENyWXy00HKJo7g== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| ltgjWuYRWs5AbCXdKxowZA== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| kXy3QLICR1R2c0bpGZftOA== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| RUVneBiGMdfkrpUHzwdSGQ== | 2025-11-18 | Class II permissive change or modification of presently authorized equipment |
| vIfhE9YLUeLWdj/KWyCEEg== | 2025-07-07 | Original Equipment |
| gCUKf3HhaPT0FIWZKPFl4A== | 2025-03-11 | Class II permissive change or modification of presently authorized equipment |
| i/99SART00i3cjs4S1OerQ== | 2025-02-12 | Class II permissive change or modification of presently authorized equipment |
| fTUw+PS6msGPKO9wl3vOyA== | 2025-02-12 | Class II permissive change or modification of presently authorized equipment |
| eoPgPTphBeieIAEW0Aa+CA== | 2025-02-12 | Class II permissive change or modification of presently authorized equipment |
| Z/UUhw5GB1nLAARCq+PYZw== | 2025-02-12 | Class II permissive change or modification of presently authorized equipment |
| wrmSJmdE88xqlvnPmE4r/w== | 2024-03-12 | Class II permissive change or modification of presently authorized equipment |
| fGZPEKDTjJHhv4lkQHqSWQ== | 2024-03-12 | Class II permissive change or modification of presently authorized equipment |
| ZDCsrGPSWemFClgiRXkulg== | 2024-03-12 | Class II permissive change or modification of presently authorized equipment |
| CNL9QEiOaYXMTZ0GlS+lBw== | 2024-03-12 | Class II permissive change or modification of presently authorized equipment |
| Y9byjtWxO1h2zbO66AQ9oQ== | 2024-02-23 | Class II permissive change or modification of presently authorized equipment |
| Wlpd86phjVlc+qfDNIxoAw== | 2024-02-23 | Class II permissive change or modification of presently authorized equipment |
| B9tLiPk6tMA0TjaEVZzqhg== | 2024-02-23 | Class II permissive change or modification of presently authorized equipment |
| 2/twP0tF1f4jz2wmJ/9mww== | 2024-02-23 | Class II permissive change or modification of presently authorized equipment |
| uSgZtya8ekNsP4luYMKXYQ== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| fEZOeRhzLt/Wy1S8IjgA5g== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| b6eNf0wKRV7SlR75bV98xg== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| anSNxkGZke44xyFiYdNP7A== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| X2U4xMi1+tO65rPrb8Kwqg== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| RlF59Olwx3r513RafWL4Hg== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| RCuDN5y6fzh23Egv9z55Mg== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| M59V2AaFtMEusQUkOzNlzw== | 2024-02-20 | Class II permissive change or modification of presently authorized equipment |
| yGE/HUtC7gQUGuhiARYNAw== | 2024-02-14 | Class II permissive change or modification of presently authorized equipment |
| vsSgZeCXjF89CAqhAwXoIw== | 2024-02-14 | Class II permissive change or modification of presently authorized equipment |
| IUb7bkGcelF/g4DHh2ykDw== | 2024-02-14 | Class II permissive change or modification of presently authorized equipment |
| HMmbMct4fKvMZbaRl5MX+A== | 2024-02-14 | Class II permissive change or modification of presently authorized equipment |
| PxIiWaRduRBZsKnVikm+dA== | 2024-02-01 | Class II permissive change or modification of presently authorized equipment |
| 81h4tb9sC7TQ+49v58JTrg== | 2024-02-01 | Class II permissive change or modification of presently authorized equipment |
| 5VH+7Wq0WxZfbjBPODHJAQ== | 2024-02-01 | Class II permissive change or modification of presently authorized equipment |
| 5KGh+zSsWRmN2lLX2Bp8fg== | 2024-02-01 | Class II permissive change or modification of presently authorized equipment |
| riuogRIdjBfWnKeVLmn9RQ== | 2024-01-17 | Class II permissive change or modification of presently authorized equipment |
| LB7J8HL2tV+psh+h8Zp0sQ== | 2024-01-17 | Class II permissive change or modification of presently authorized equipment |
| I0mBjz+w4sIyfpGC/ZcL+Q== | 2024-01-17 | Class II permissive change or modification of presently authorized equipment |
| 4xvjKEswhGZ3BZTRfPw2jg== | 2024-01-17 | Class II permissive change or modification of presently authorized equipment |
| 0JD27UNM9gKln/01mZePJQ== | 2024-01-17 | Class II permissive change or modification of presently authorized equipment |
| cKYg51MKvUyY44aKTBR7zA== | 2024-01-10 | Class II permissive change or modification of presently authorized equipment |
| PKwJV4zejUnwXD7o2NjxEA== | 2024-01-10 | Class II permissive change or modification of presently authorized equipment |
| M5vGJKJq6AC3H44+cmR86g== | 2024-01-10 | Class II permissive change or modification of presently authorized equipment |
| yDrVqnRqTk6/TEhL9hpNtw== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| wPL+bDmgDZj6PnTKbN9OVg== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| AMSW51uU4v03nTmppp9dTQ== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| 6Y4hnrfHMB4uJ5St5qW6mg== | 2024-01-08 | Class II permissive change or modification of presently authorized equipment |
| tWWqU7DmDex7PGSRFzjV6A== | 2024-01-05 | Class II permissive change or modification of presently authorized equipment |
| t1pNT6zMirkKhflOn8AfHA== | 2024-01-05 | Class II permissive change or modification of presently authorized equipment |
| ptWjfOU79ItuynkFrSzPvg== | 2024-01-05 | Class II permissive change or modification of presently authorized equipment |
| 5f386BxSP4D3rwHUdbRdig== | 2024-01-05 | Class II permissive change or modification of presently authorized equipment |
| v69+SUFW6huQQWyj1bu9NQ== | 2024-01-04 | Class II permissive change or modification of presently authorized equipment |
| l/Jn5SCJmsZ4/5PlrxYPdw== | 2024-01-04 | Class II permissive change or modification of presently authorized equipment |
| IyKF8zUgakTLb7EJylyJ0g== | 2024-01-04 | Class II permissive change or modification of presently authorized equipment |
| 4vsO9D6JG0hpn7a3CvVBeg== | 2024-01-04 | Class II permissive change or modification of presently authorized equipment |
| TyoYt/4dYBA5y8IW7FScrA== | 2024-01-02 | Class II permissive change or modification of presently authorized equipment |
| PP9eIy5Wx/lUXa93KOkrnw== | 2024-01-02 | Class II permissive change or modification of presently authorized equipment |
| Buf7Qzw6j+DgRb90aPBH3Q== | 2024-01-02 | Class II permissive change or modification of presently authorized equipment |
| 0kMe4GqPdnw4NVMxEQJrKQ== | 2024-01-02 | Class II permissive change or modification of presently authorized equipment |
| m3P2ONOtSP0hqPKEV1T5tQ== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| f8oGRlCpjkESQSvFrispLQ== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| Xa29MAGTHweSneR/iuLSHA== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| QDTZJpGlsKLdhnOopNBGgA== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| Q0PmvzIZv1H9dTbBFrY/5Q== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| Ko6OdgJOl1uIoqx32BZtrg== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| FqNBycl5zYS3MrOUJEhz4A== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| BDQ/IXv2m6d+GNK1/CPlaA== | 2023-12-28 | Class II permissive change or modification of presently authorized equipment |
| t2/lNalqGJUb1A9MELxlig== | 2023-12-27 | Class II permissive change or modification of presently authorized equipment |
| oW53oLF1v7AsZA+NKxaZQg== | 2023-12-27 | Class II permissive change or modification of presently authorized equipment |
| hh/rqxv2sYvHbJREJT5mRw== | 2023-12-27 | Class II permissive change or modification of presently authorized equipment |
| UbpC1x2dwe/E4lcJAou5Hg== | 2023-12-27 | Class II permissive change or modification of presently authorized equipment |
| weJSnC/i40dwxSO5gm+MoA== | 2023-11-17 | Class II permissive change or modification of presently authorized equipment |
| pLv2YZauryVghsEBZJJrIw== | 2023-11-17 | Class II permissive change or modification of presently authorized equipment |
| oYXFoPw329318Va/lNgZUw== | 2023-11-17 | Class II permissive change or modification of presently authorized equipment |
| 7j7jQgWEzO3WCB++5758Sw== | 2023-11-17 | Class II permissive change or modification of presently authorized equipment |
| cbRBP+kUq+e7ZoohB3I/og== | 2023-11-16 | Class II permissive change or modification of presently authorized equipment |
| X5LOfCYOn21rgd8+Io9sqw== | 2023-11-16 | Class II permissive change or modification of presently authorized equipment |
| NnbSQ0fme/A0NePzC3wkgQ== | 2023-11-16 | Class II permissive change or modification of presently authorized equipment |
| ABXu55kYhu5aLJ/vEJ2Aww== | 2023-11-16 | Class II permissive change or modification of presently authorized equipment |
| dMyemTsRUK35Ol1WA17jrg== | 2023-09-14 | Original Equipment |
| Q2izbqng5Rl4pB03RMWTBg== | 2023-08-23 | Class II permissive change or modification of presently authorized equipment |
| LR5wCOA2n7E2JHWAsi9epw== | 2023-08-23 | Class II permissive change or modification of presently authorized equipment |
| /ofHGVkC7+FBciyfxi9J7Q== | 2023-08-23 | Class II permissive change or modification of presently authorized equipment |
| XwkEly2oHf6q0QqEgrVOvw== | 2023-08-15 | Original Equipment |
| WJyOUK2OqpXVJSVsw1V3Fg== | 2023-08-15 | Original Equipment |
| Mb9nGWnlhE3y5rwbfuiv8A== | 2023-08-15 | Original Equipment |
| 2h+nJv0xMPzJ1XK43QLtiQ== | 2023-08-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.032 | 15C | CC |
| 5180-5240 MHz | 0.151 | 15E | CC MO |
| 5190-5230 MHz | 0.224 | 15E | CC MO |
| 5210 MHz | 0.138 | 15E | CC MO |
| 5250 MHz | 0.097 | 15E | CC MO ND |
| 5260-5320 MHz | 0.148 | 15E | CC MO ND |
| 5270-5310 MHz | 0.227 | 15E | CC MO ND |
| 5290 MHz | 0.142 | 15E | CC MO ND |
| 5500-5700 MHz | 0.15 | 15E | CC MO ND |
| 5510-5670 MHz | 0.227 | 15E | CC MO ND |
| 5710 MHz | 0.244 | 15E | CC MO ND |
| 5720 MHz | 0.136 | 15E | CC MO ND |
| 5690 MHz | 0.249 | 15E | CC MO ND |
| 5530-5610 MHz | 0.223 | 15E | CC MO ND |
| 5570 MHz | 0.154 | 15E | CC MO ND |
| 5745-5825 MHz | 0.433 | 15E | CC MO |
| 5755-5795 MHz | 0.413 | 15E | CC MO |
| 5775 MHz | 0.234 | 15E | CC MO |
| 5845-5885 MHz | 0.327 | 15E | CC EP MO |
| 5835-5875 MHz | 0.708 | 15E | CC EP MO |
| 5855 MHz | 0.731 | 15E | CC EP MO |
| 5815 MHz | 0.37 | 15E | CC EP MO |
| 15B | CC | ||
| 2402-2480 MHz | 0.028 | 15C | CC |
| 2412-2472 MHz | 0.998 | 15C | CC MO |
| 2422-2462 MHz | 0.997 | 15C | CC MO |
| 5955-7115 MHz | 0.012 | 15E | CC EP MO |
| 5965-7085 MHz | 0.025 | 15E | CC EP MO |
| 5985-7025 MHz | 0.049 | 15E | CC EP MO |
| 6025-6985 MHz | 0.093 | 15E | CC EP MO |
| 6105-6905 MHz | 0.163 | 15E | CC EP MO |
| 5955-6415 MHz | 0.57 | 15E | CC EP MO |
| 5965-6405 MHz | 0.962 | 15E | CC EP MO |
| 5985-6385 MHz | 0.907 | 15E | CC EP MO |
| 6025-6345 MHz | 0.712 | 15E | CC EP MO |
| 6105-6265 MHz | 0.35 | 15E | CC EP MO |
| 6535-6855 MHz | 0.568 | 15E | CC EP MO |
| 6565-6845 MHz | 0.956 | 15E | CC EP MO |
| 6625-6785 MHz | 0.802 | 15E | CC EP MO |
| 6665 MHz | 0.623 | 15E | CC EP MO |
| 5955-7115 MHz | 0.005 | 15E | CC EP MO |
| 5965-7085 MHz | 0.01 | 15E | CC EP MO |
| 5985-7025 MHz | 0.021 | 15E | CC EP MO |
| 6025-6985 MHz | 0.024 | 15E | CC EP MO |
| 6105-6905 MHz | 0.025 | 15E | CC EP MO |
Grants
TCB Grant - Application zpfWaJXIjsGXL9ovTRkYzQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/04/2026 Application Dated: 03/03/2026 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-I148 Convertible PC. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 1.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application ZDCsrGPSWemFClgiRXkulg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/12/2024 Application Dated: 03/11/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZDCsrGPSWemFClgiRXkulg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 03/12/2024 Application Dated: 03/11/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/12/2025 Application Dated: 02/12/2025 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Lenovo model Lenovo Chrome 2in1 14IRU10 Convertible PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 1.46 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application yGE/HUtC7gQUGuhiARYNAw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/14/2024 Application Dated: 02/08/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.30 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yGE/HUtC7gQUGuhiARYNAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 02/14/2024 Application Dated: 02/08/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.30 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P130F notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.37 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yDrVqnRqTk6/TEhL9hpNtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P130F notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.37 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 02/23/2024 Application Dated: 02/21/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). This C2PC establishes portable category SAR conditions for the HP model HSN-I61C. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Y9byjtWxO1h2zbO66AQ9oQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 02/23/2024 Application Dated: 02/21/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). This C2PC establishes portable category SAR conditions for the HP model HSN-I61C. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/15/2023 Application Dated: 08/11/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel BE200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application XwkEly2oHf6q0QqEgrVOvw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 08/15/2023 Application Dated: 08/11/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel BE200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/28/2023 Application Dated: 12/28/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.86 W/kg and 1.49 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Xa29MAGTHweSneR/iuLSHA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 12/28/2023 Application Dated: 12/28/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.86 W/kg and 1.49 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/16/2023 Application Dated: 11/14/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. This C2PC establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 0.73 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application X5LOfCYOn21rgd8+Io9sqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 11/16/2023 Application Dated: 11/14/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. This C2PC establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 0.73 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/20/2024 Application Dated: 02/19/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 0.67 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application X2U4xMi1+tO65rPrb8Kwqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 02/20/2024 Application Dated: 02/19/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 0.67 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/12/2024 Application Dated: 03/11/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 0.66 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wrmSJmdE88xqlvnPmE4r/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 03/12/2024 Application Dated: 03/11/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 0.66 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). This C2PC establishes portable category SAR conditions for the Dell model P130F notebook PC. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 0.37 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application wPL+bDmgDZj6PnTKbN9OVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 01/08/2024 Application Dated: 01/07/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). This C2PC establishes portable category SAR conditions for the Dell model P130F notebook PC. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 0.37 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 02/23/2024 Application Dated: 02/21/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model HSN-I61C. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Wlpd86phjVlc+qfDNIxoAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 02/23/2024 Application Dated: 02/21/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model HSN-I61C. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/15/2023 Application Dated: 08/11/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WJyOUK2OqpXVJSVsw1V3Fg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 08/15/2023 Application Dated: 08/11/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/17/2023 Application Dated: 11/16/2023 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. This C2PC establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.12 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application weJSnC/i40dwxSO5gm+MoA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 11/17/2023 Application Dated: 11/16/2023 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. This C2PC establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.12 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/14/2024 Application Dated: 02/08/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vsSgZeCXjF89CAqhAwXoIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 02/14/2024 Application Dated: 02/08/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/12/2025 Application Dated: 12/10/2025 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Lenovo model Lenovo Chrome 14ITN11 Notebook PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.57 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application VQtX03H7Y7Iv26IKDGMB3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/10/2025 Application Dated: 12/10/2025 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Lenovo model Lenovo Chrome 100e G5 ITN Notebook PC. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.50 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application vIfhE9YLUeLWdj/KWyCEEg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 07/07/2025 Application Dated: 07/07/2025 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | 15E 6 GHZ Very Low Power Device |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.005 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.01 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.021 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.024 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.025 |
| Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device supports 20, 40, 80, 160, and 320 MHz BW modes. Power Density and SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. For full power SKU: The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11 mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.78 W/kg and 1.57 W/kg respectively. SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.76 W/kg and 1.56 W/kg respectively. SKU 11 mm: The highest reported Body and Simultaneous SAR values are: 0.74 W/kg and 1.57 W/kg respectively. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application v69+SUFW6huQQWyj1bu9NQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/04/2024 Application Dated: 01/04/2024 |
| Intel Corporation |
| 425 rue de Goa |
| Le Cargo B6 |
| Antibes, 06600 France |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P51E notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application v69+SUFW6huQQWyj1bu9NQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 425 rue de Goa Le Cargo B6 Antibes, 06600 France |
Date of Grant: 01/04/2024 Application Dated: 01/04/2024 |
| Attention: Benjamin Lavenant , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9BE200NG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). This C2PC establishes portable category SAR conditions for the Dell model P51E notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |