FCC ID PD9WCF2011BM
Compact Flash 2.4 GHz WLAN
by Intel Corporation
Grantee Code: PD9 Product Code: WCF2011BM
Latest application date: 2003-03-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-03-12 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: H9PLA4137P Grant Date: 08/31/2001 | 2002-03-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2003-03-12 | PDF 1,000.6 KB |
| Photographs | External Photos | 2002-03-21 | PDF 994.3 KB |
| Regulatory Information | ID Label/Location Info | 2002-03-21 | PDF 787.9 KB |
| Additional EMC Test Report | Test Report | 2003-03-12 | PDF 3.8 MB |
| New Conducted Data | Test Report | 2003-03-12 | PDF 245 KB |
| Comments | Cover Letter(s) | 2003-03-12 | PDF 55 KB |
| Cover Letters and Explanation of Changes and Previous Grants | Cover Letter(s) | 2003-03-12 | PDF 2.5 MB |
| Description of How Power Was Set and Higher than EMC | Cover Letter(s) | 2003-03-12 | PDF 48 KB |
| Explanation of Additional SAR Data | Cover Letter(s) | 2003-03-12 | PDF 50.3 KB |
| Response | Cover Letter(s) | 2003-03-12 | PDF 81.8 KB |
| Response to FCC Questions | Cover Letter(s) | 2003-03-12 | PDF 47.4 KB |
| Authorization to Act for INTEL | Cover Letter(s) | 2002-03-21 | PDF 258.3 KB |
| Letter of Authorization for INTEL to request a Grant | Cover Letter(s) | 2002-03-21 | PDF 84.2 KB |
| Request for Grant for INTEL | Cover Letter(s) | 2002-03-21 | PDF 1.2 MB |
| Revised SAR Report Including Retesting Discussed with FCC | RF Exposure Info | 2003-03-12 | PDF 3.9 MB |
| SAR Report for PDAs Metadata only | RF Exposure Info | 2003-03-12 | PDF 3.2 MB |
| Block Diagram Metadata only | Block Diagram | PDF 67.8 KB | |
| Schematics Metadata only | Schematics | PDF 767.5 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 258 KB | |
| Revised Parts List Metadata only | Parts List/Tune Up Info | PDF 119.6 KB |
Application Information
| Application ID | WZWwv9TTpC8uXkh2zOMlqQ== |
|---|---|
| Final Action Date | 2003-03-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | WCF2011BM |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Compact Flash 2.4 GHz WLAN |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Agent | Jayanta Jayanta Jayanta, APREL Laboratories, j.sarkar@aprel.com  , 613-820-2730 |
| Technical Contact | Jim Baer, Intel Corporation, jim.baer@intel.com , 805-338-2609 |
| Non-Technical Contact | Jayanta Sarkar, APREL Laboratories, j.sarkar@aprel.com , 613-820-2730 |
| Test Firm | Jay Sarkar, APREL Laboratories, j.sarkar@aprel.com , 613-820-2730 |
| TCB Email | hotline@AmericanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Device is authorized for use with internal PCB chip antenna only. Power output is peak conducted. SAR compliance has been demonstrated for the specific near-body operating configurations tested for this filing. Device is approved for mobile and laptop computer operating configurations, and portable handheld configurations, for satisfying RF exposure compliance requirements. Device was tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot, as described in this filing. SAR compliance was evaluated in 3 PDA configurations as tested in this filing, and is applicable when the device is used in PDA configurations with substantially similar physical construction and characteristics, and electrical and RF characteristics. Near-body operations are restricted to belt-clips, holsters or similar accessories that do not contain metallic components in the assembly and provide at least 1.5 cm separation between the device and the users body. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be informed of the near-body operating requirements for satisfying RF exposure compliance. The highest report SAR values are: laptop 1.47 W/kg, PDA with 0 cm spacing 1.1 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WZWwv9TTpC8uXkh2zOMlqQ== | 2003-03-12 | Class II permissive change or modification of presently authorized equipment |
| c2Ukh3CWTjXd4tA9omWi+w== | 2002-03-21 | Change in identification of presently authorized equipment. Original FCC ID: H9PLA4137P Grant Date: 08/31/2001 |
Equipment Authorization
Grants
TCB Grant - Application WZWwv9TTpC8uXkh2zOMlqQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/12/2003 Application Dated: 03/12/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WCF2011BM |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Compact Flash 2.4 GHz WLAN |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.089 |
| Device is authorized for use with internal PCB chip antenna only. Power output is peak conducted. SAR compliance has been demonstrated for the specific near-body operating configurations tested for this filing. Device is approved for mobile and laptop computer operating configurations, and portable handheld configurations, for satisfying RF exposure compliance requirements. Device was tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot, as described in this filing. SAR compliance was evaluated in 3 PDA configurations as tested in this filing, and is applicable when the device is used in PDA configurations with substantially similar physical construction and characteristics, and electrical and RF characteristics. Near-body operations are restricted to belt-clips, holsters or similar accessories that do not contain metallic components in the assembly and provide at least 1.5 cm separation between the device and the users body. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be informed of the near-body operating requirements for satisfying RF exposure compliance. The highest report SAR values are: laptop 1.47 W/kg, PDA with 0 cm spacing 1.1 W/kg. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application WZWwv9TTpC8uXkh2zOMlqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/12/2003 Application Dated: 03/12/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WCF2011BM |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Compact Flash 2.4 GHz WLAN |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.089 |
| Device is authorized for use with internal PCB chip antenna only. Power output is peak conducted. SAR compliance has been demonstrated for the specific near-body operating configurations tested for this filing. Device is approved for mobile and laptop computer operating configurations, and portable handheld configurations, for satisfying RF exposure compliance requirements. Device was tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot, as described in this filing. SAR compliance was evaluated in 3 PDA configurations as tested in this filing, and is applicable when the device is used in PDA configurations with substantially similar physical construction and characteristics, and electrical and RF characteristics. Near-body operations are restricted to belt-clips, holsters or similar accessories that do not contain metallic components in the assembly and provide at least 1.5 cm separation between the device and the users body. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be informed of the near-body operating requirements for satisfying RF exposure compliance. The highest report SAR values are: laptop 1.47 W/kg, PDA with 0 cm spacing 1.1 W/kg. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/21/2002 Application Dated: 11/20/2001 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WCF2011BM |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Compact FlashSpectrum 24 HR WLAN |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.089 |
| Device is authorized for use with internal PCB chip antenna only. |
| End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| This application was originally granted on 11/28/2001. |
| Output is peak conducted. Device is approved for mobile and laptop computer operating configurations with respect to 2.1091 for satisfying RF exposure compliance requirements. Device has been tested stand alone for SAR compliance in a typical laptop computer with side PCMCIA slot, as described in this filing. The highest reported SAR value is 1.47 W/kg. |
| Mail To: |
| John Roman, Manager ICG |
| Intel Corporation |
| 5200 N.E. Elam Young Parkway |
| Hillsboro, OR 97124-6497 |