FCC ID PD9WM3A2100
Mini-PCI Transmitter Card
by Intel Corporation
Grantee Code: PD9 Product Code: WM3A2100
Latest application date: 2003-02-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-02-19 |
| 2412-2462 MHz | Original Equipment | 2002-12-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| OEM Compliance Guide | Users Manual | 2002-12-27 | PDF 153.9 KB |
| Revised Users Manual | Users Manual | 2002-12-27 | PDF 264 KB |
| Internal Photos | Internal Photos | 2002-12-27 | PDF 631 KB |
| Antenna Photos | External Photos | 2002-12-27 | PDF 443.1 KB |
| External Photos | External Photos | 2002-12-27 | PDF 118.3 KB |
| Label Location | ID Label/Location Info | 2002-12-27 | PDF 67.9 KB |
| Sample Label | ID Label/Location Info | 2002-12-27 | PDF 215.9 KB |
| Additional Antennas Photos | Operational Description | 2003-02-19 | PDF 270.2 KB |
| CF 73 Antenna Gain | Operational Description | 2003-02-19 | PDF 34.2 KB |
| CF 73 Antenna Specs and photos | Operational Description | 2003-02-19 | PDF 428.7 KB |
| PIFA Antenna Info | Operational Description | 2003-02-19 | PDF 2.2 MB |
| Ethertronics Antenna Specs | Operational Description | 2002-12-27 | PDF 263.3 KB |
| Ethertronics Cable Loss Measurments | Operational Description | 2002-12-27 | PDF 161.5 KB |
| Frequency Band Letter | Operational Description | 2002-12-27 | PDF 32.3 KB |
| Hitachi Antenna Specs | Operational Description | 2002-12-27 | PDF 268.1 KB |
| Hitachi Cable Loss Measurements | Operational Description | 2002-12-27 | PDF 75.4 KB |
| Operational Description Metadata only | Operational Description | 2002-12-27 | PDF 279.2 KB |
| Test Photos | Test Setup Photos | 2003-02-19 | PDF 141.8 KB |
| Test Photos | Test Setup Photos | 2002-12-27 | PDF 753.5 KB |
| Test Report | Test Report | 2003-02-19 | PDF 496.7 KB |
| Revised Test Report | Test Report | 2002-12-27 | PDF 901.9 KB |
| Comments | Cover Letter(s) | 2003-02-19 | PDF 38.2 KB |
| Copy of Original Grant | Cover Letter(s) | 2003-02-19 | PDF 94.6 KB |
| Permissive Change Letter | Cover Letter(s) | 2003-02-19 | PDF 23 KB |
| Response | Cover Letter(s) | 2003-02-19 | PDF 41.9 KB |
| Agency Letter | Cover Letter(s) | 2002-12-27 | PDF 29 KB |
| Comments | Cover Letter(s) | 2002-12-27 | PDF 55.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2002-12-27 | PDF 37.9 KB |
| Modular Information letter | Cover Letter(s) | 2002-12-27 | PDF 17.2 KB |
| Response | Cover Letter(s) | 2002-12-27 | PDF 48.5 KB |
| RF Exposure Info | RF Exposure Info | 2003-02-19 | PDF 65.5 KB |
| Revised RF Exposure Calculations | RF Exposure Info | 2002-12-27 | PDF 62.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 23.5 KB | |
| Schematics Metadata only | Schematics | PDF 623.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 9.7 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 94.8 KB |
Application Information
| Application ID | 1u/tCvjvQnxgY9ruFm64zA== |
|---|---|
| Final Action Date | 2003-02-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | WM3A2100 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Mini-PCI Transmitter Card |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Agent | Steve Steve Steve, Aegis Labs, Inc., steve@aegislabsinc.com  , 949-459-7886 |
| Technical Contact | Robert W Paxman, Intel Corporation, Robert.Paxman@Intel.com , 805-376-9300 |
| Non-Technical Contact | Robert W Paxman, Intel Corporation, Robert.Paxman@Intel.com , 805-376-9300 |
| Test Firm | Rick Candelas, Aegis Labs, Inc., rcandelas@aegislabsinc.com , 949-459-7886 |
| TCB Email | hotline@AmericanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular approval. This Permissive Change filing has added 2 additional antennas to the original filing. Power output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1u/tCvjvQnxgY9ruFm64zA== | 2003-02-19 | Class II permissive change or modification of presently authorized equipment |
| /fYGwW+Cz6BSQo18wRVpDg== | 2002-12-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 1u/tCvjvQnxgY9ruFm64zA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/19/2003 Application Dated: 02/19/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3A2100 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Transmitter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.044 |
| Modular approval. This Permissive Change filing has added 2 additional antennas to the original filing. Power output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application 1u/tCvjvQnxgY9ruFm64zA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 02/19/2003 Application Dated: 02/19/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3A2100 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Transmitter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.044 |
| Modular approval. This Permissive Change filing has added 2 additional antennas to the original filing. Power output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/27/2002 Application Dated: 12/27/2002 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3A2100 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Transmitter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0441 |
| Modular approval. Power output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application /fYGwW+Cz6BSQo18wRVpDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/27/2002 Application Dated: 12/27/2002 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3A2100 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Transmitter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0441 |
| Modular approval. Power output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |