FCC ID PD9WM3B2100A
Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter
by Intel Corporation
Grantee Code: PD9 Product Code: WM3B2100A
Latest application date: 2003-05-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5150-5250 MHz | Original Equipment | 2003-05-29 |
| 2412-2462 MHz | Original Equipment | 2003-05-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Compliance Guidelines | Users Manual | 2003-05-29 | PDF 282.1 KB |
| Manual | Users Manual | 2003-05-29 | PDF 674 KB |
| Revised Internal Photos | Internal Photos | 2003-05-29 | PDF 288.5 KB |
| Revised Internal Pics | Internal Photos | 2003-05-29 | PDF 288.5 KB |
| Revised External Photos | External Photos | 2003-05-29 | PDF 102 KB |
| Revised External Pics | External Photos | 2003-05-29 | PDF 102 KB |
| Label Placement | ID Label/Location Info | 2003-05-29 | PDF 69.1 KB |
| Revised Label Sample | ID Label/Location Info | 2003-05-29 | PDF 414.3 KB |
| Response to ATCB | Block Diagram | 2003-05-29 | PDF 71.7 KB |
| Revised Test Setup | Test Setup Photos | 2003-05-29 | PDF 242.5 KB |
| Peak Excursion | Test Report | 2003-05-29 | PDF 34 KB |
| Revised DTS Report | Test Report | 2003-05-29 | PDF 214 KB |
| Revised UNII | Test Report | 2003-05-29 | PDF 743.6 KB |
| Agent Authorization | Cover Letter(s) | 2003-05-29 | PDF 596.8 KB |
| Confid Request | Cover Letter(s) | 2003-05-29 | PDF 264.7 KB |
| Response to ATCB | Cover Letter(s) | 2003-05-29 | PDF 71.7 KB |
| Ethertronics Antenna | RF Exposure Info | 2003-05-29 | PDF 262.9 KB |
| Hitachi Antenna | RF Exposure Info | 2003-05-29 | PDF 268.1 KB |
| MPE Calculations | RF Exposure Info | 2003-05-29 | PDF 10.6 KB |
| Block Metadata only | Block Diagram | PDF 60.5 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 60.5 KB | |
| Schema Metadata only | Schematics | PDF 1.4 MB | |
| Functional Description Metadata only | Operational Description | PDF 221.3 KB | |
| Bill of Materials Metadata only | Parts List/Tune Up Info | PDF 16.9 KB | |
| Parts Metadata only | Parts List/Tune Up Info | PDF 16.9 KB |
Application Information
| Application ID | XiGR4cwwBhyY0j2iFubxJw== |
|---|---|
| Final Action Date | 2003-05-29 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008035131 |
| Model | WM3B2100A |
| Frequency Range | 5150-5250 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Technical Contact | Juan Martinez, Elliott Laboratories Inc., doc@elliottlabs.com  , 408 245 7800 |
| Test Firm | David Bare, Elliott Laboratories LLC, dbare@elliottlabs.com , 408-245-7800 |
| TCB Email | hotline@americanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is Conducted. This transmitter module is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this device. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. OEM Integrators are responsible for the integral antenna requirements of 15.407(d). The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| XiGR4cwwBhyY0j2iFubxJw== | 2003-05-29 | Original Equipment |
| DsUH7de2qvF5oetljiQ6Kg== | 2003-05-29 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XiGR4cwwBhyY0j2iFubxJw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/29/2003 Application Dated: 05/29/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2100A |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5150.0 - 5250.0 | 0.045 | 20.0 PM | |
| CE | 15E | 5250.0 - 5350.0 | 0.054 | 20.0 PM |
| Modular Approval. Power Output listed is Conducted. This transmitter module is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this device. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. OEM Integrators are responsible for the integral antenna requirements of 15.407(d). The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application XiGR4cwwBhyY0j2iFubxJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/29/2003 Application Dated: 05/29/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2100A |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5150.0 - 5250.0 | 0.045 | 20.0 PM | |
| CE | 15E | 5250.0 - 5350.0 | 0.054 | 20.0 PM |
| Modular Approval. Power Output listed is Conducted. This transmitter module is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this device. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. OEM Integrators are responsible for the integral antenna requirements of 15.407(d). The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/29/2003 Application Dated: 05/29/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2100A |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.045 |
| Modular Approval. Power Output listed is Conducted. This transmitter module is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this device. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application DsUH7de2qvF5oetljiQ6Kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 05/29/2003 Application Dated: 05/29/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2100A |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Mini-PCI Type 3B 802.11a and 802.11b WLAN Adapter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.045 |
| Modular Approval. Power Output listed is Conducted. This transmitter module is authorized only for use in devices where the antenna may be installed such that no less than 20 cm will be maintained between the antenna and users as specified in this filing. The antenna used for this device must be installed to provide a separation distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter other than those contained within this device. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |