FCC ID PD9WM3B2200BG
PRO/Wireless 2200BG
by Intel Corporation
Grantee Code: PD9 Product Code: WM3B2200BG
Latest application date: 2005-08-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-08-26 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-07-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-03-31 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-01-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-01-04 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-08-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-04-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-03-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-12-15 |
| 2412-2462 MHz | Original Equipment | 2003-12-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users guide | Users Manual | 2003-12-12 | PDF 292.8 KB |
| Internal Photos | Internal Photos | 2005-03-31 | PDF 295.5 KB |
| Internal Photos | Internal Photos | 2005-01-10 | PDF 295.5 KB |
| Internal Photos | Internal Photos | 2005-01-04 | PDF 288.8 KB |
| Internal photos | Internal Photos | 2004-08-24 | PDF 295.5 KB |
| Internal photos | Internal Photos | 2004-04-22 | PDF 121.3 KB |
| Internal Photos | Internal Photos | 2004-03-08 | PDF 121.3 KB |
| Internal photos | Internal Photos | 2003-12-12 | PDF 112.2 KB |
| External Photos | External Photos | 2005-03-31 | PDF 133.7 KB |
| External Photos | External Photos | 2005-01-10 | PDF 133.7 KB |
| External Photos | External Photos | 2005-01-04 | PDF 133.7 KB |
| External photos | External Photos | 2004-08-24 | PDF 133.7 KB |
| External photos | External Photos | 2004-04-22 | PDF 135.8 KB |
| External Photos | External Photos | 2004-03-08 | PDF 135.8 KB |
| External photos | External Photos | 2003-12-12 | PDF 213.4 KB |
| FCC ID label 1 | ID Label/Location Info | 2003-12-12 | PDF 129.6 KB |
| FCC ID label 2 | ID Label/Location Info | 2003-12-12 | PDF 242.9 KB |
| Fcc IDlabel placement | ID Label/Location Info | 2003-12-12 | PDF 85.7 KB |
| Antenna Information Amphenol | Operational Description | 2004-04-22 | PDF 271.8 KB |
| Antenna Information Foxconn | Operational Description | 2004-04-22 | PDF 402.4 KB |
| Antenna Information Wistron | Operational Description | 2004-04-22 | PDF 285.3 KB |
| Antenna 1 | Operational Description | 2003-12-15 | PDF 747.1 KB |
| Antenna 2 | Operational Description | 2003-12-15 | PDF 1.2 MB |
| Antenna 3 | Operational Description | 2003-12-15 | PDF 1.5 MB |
| Setup photos | Test Setup Photos | 2005-07-25 | PDF 217.5 KB |
| Test Setup Photos | Test Setup Photos | 2005-03-31 | PDF 153.5 KB |
| Test Setup Photos | Test Setup Photos | 2005-01-10 | PDF 145.8 KB |
| Test Setup Photos | Test Setup Photos | 2005-01-04 | PDF 146.1 KB |
| Setup photos | Test Setup Photos | 2004-08-24 | PDF 145.3 KB |
| Set up photos | Test Setup Photos | 2004-04-22 | PDF 222.3 KB |
| Test Setup Pics | Test Setup Photos | 2004-03-08 | PDF 222.3 KB |
| Test setup photos | Test Setup Photos | 2003-12-15 | PDF 327.2 KB |
| Set up photos 1 | Test Setup Photos | 2003-12-12 | PDF 378.8 KB |
| Set up photos 2 | Test Setup Photos | 2003-12-12 | PDF 81 KB |
| Test report | Test Report | 2005-08-26 | PDF 287.7 KB |
| Test report | Test Report | 2005-07-25 | PDF 476.8 KB |
| Test Report | Test Report | 2005-03-31 | PDF 562.3 KB |
| Test Report | Test Report | 2005-01-10 | PDF 557.1 KB |
| Test Report | Test Report | 2005-01-04 | PDF 411.3 KB |
| Test report revised | Test Report | 2004-08-24 | PDF 537.5 KB |
| Test report | Test Report | 2004-04-22 | PDF 1.2 MB |
| Test Report | Test Report | 2004-03-08 | PDF 567.5 KB |
| Test report | Test Report | 2003-12-15 | PDF 410.7 KB |
| Test report rev C | Test Report | 2003-12-12 | PDF 1.2 MB |
| Anti drug | Attestation Statements | 2003-12-12 | PDF 337.5 KB |
| POA | Cover Letter(s) | 2005-08-26 | PDF 256.9 KB |
| Reason for PC2 | Cover Letter(s) | 2005-08-26 | PDF 25.1 KB |
| Reason for PC2 | Cover Letter(s) | 2005-07-25 | PDF 25.1 KB |
| Authorization | Cover Letter(s) | 2005-03-31 | PDF 23.2 KB |
| Cover Letter | Cover Letter(s) | 2005-03-31 | PDF 76.9 KB |
| Authorization Letter | Cover Letter(s) | 2005-01-10 | PDF 23.2 KB |
| Cover Letter | Cover Letter(s) | 2005-01-10 | PDF 77.1 KB |
| Cover Letter | Cover Letter(s) | 2005-01-04 | PDF 76.4 KB |
| ATCB comments | Cover Letter(s) | 2004-08-24 | PDF 16.6 KB |
| POA | Cover Letter(s) | 2004-08-24 | PDF 23.2 KB |
| Reason for PC2 | Cover Letter(s) | 2004-08-24 | PDF 76.2 KB |
| Response to ATCB | Cover Letter(s) | 2004-08-24 | PDF 85.5 KB |
| POA | Cover Letter(s) | 2004-04-22 | PDF 161 KB |
| Reason for PC2 | Cover Letter(s) | 2004-04-22 | PDF 70.1 KB |
| Reason for Filing | Cover Letter(s) | 2004-03-08 | PDF 70.5 KB |
| POA | Cover Letter(s) | 2003-12-15 | PDF 248.3 KB |
| Reason for PC2 | Cover Letter(s) | 2003-12-15 | PDF 8.1 KB |
| ATCB comments | Cover Letter(s) | 2003-12-12 | PDF 24.7 KB |
| Cover letter | Cover Letter(s) | 2003-12-12 | PDF 76.1 KB |
| POA | Cover Letter(s) | 2003-12-12 | PDF 29 KB |
| Request for confidentiality | Cover Letter(s) | 2003-12-12 | PDF 37.9 KB |
| Request for modular approval | Cover Letter(s) | 2003-12-12 | PDF 81.2 KB |
| Response to ATCB | Cover Letter(s) | 2003-12-12 | PDF 67.4 KB |
| MPE | RF Exposure Info | 2005-07-25 | PDF 52.7 KB |
| antenna info | Parts List/Tune Up Info | 2005-07-25 | PDF 215.2 KB |
| antenna info | RF Exposure Info | 2005-07-25 | PDF 284 KB |
| RF Exposure Antenna 1 | RF Exposure Info | 2005-03-31 | PDF 898 KB |
| RF Exposure Antenna 2 | RF Exposure Info | 2005-03-31 | PDF 126.5 KB |
| RF Exposure MPE | RF Exposure Info | 2005-03-31 | PDF 107.1 KB |
| RF Exposure Antenna 2 | RF Exposure Info | 2005-01-10 | PDF 1.7 MB |
| RF Exposure Info Antenna 1 | RF Exposure Info | 2005-01-10 | PDF 119.1 KB |
| RF Exposure Info MPE | RF Exposure Info | 2005-01-10 | PDF 107.6 KB |
| RF Exposure Info Antenna | RF Exposure Info | 2005-01-04 | PDF 559.2 KB |
| RF Exposure Info MPE | RF Exposure Info | 2005-01-04 | PDF 106.3 KB |
| Antenna info | RF Exposure Info | 2004-08-24 | PDF 803.8 KB |
| MPE | RF Exposure Info | 2004-08-24 | PDF 70.4 KB |
| MPE | RF Exposure Info | 2004-04-22 | PDF 67.5 KB |
| Antenna Information | RF Exposure Info | 2004-03-08 | PDF 729.6 KB |
| MPE Estimations | RF Exposure Info | 2004-03-08 | PDF 62.4 KB |
| MPE | RF Exposure Info | 2003-12-12 | PDF 62.6 KB |
Application Information
| Application ID | N4AYvcoT0VrLiOTsn+vP1w== |
|---|---|
| Final Action Date | 2005-08-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | WM3B2200BG |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | PRO/Wireless 2200BG |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Agent | Juan Juan Juan, Elliott Laboratories, Inc, doc@elliottlabs.com  |
| Technical Contact | Juan Martinez, Elliott Laboratories, Inc, doc@elliottlabs.com |
| Test Firm | David Bare, National Technical Systems, david.bare@nts.com  , 510-578-3500 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular Approval. The antenna(s)used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| N4AYvcoT0VrLiOTsn+vP1w== | 2005-08-26 | Class II permissive change or modification of presently authorized equipment |
| Mv5GWBi3lVNnWa2OnSntHQ== | 2005-07-25 | Class II permissive change or modification of presently authorized equipment |
| bUaeFEm4WmGdRhFySwnamA== | 2005-03-31 | Class II permissive change or modification of presently authorized equipment |
| VgyGK2538K8UrZe29iFoVQ== | 2005-01-10 | Class II permissive change or modification of presently authorized equipment |
| 3kDwtZPwXZ9b5z+wQMY4zw== | 2005-01-04 | Class II permissive change or modification of presently authorized equipment |
| Km/omtsSUdl3cHjiwfgC5A== | 2004-08-24 | Class II permissive change or modification of presently authorized equipment |
| GSzPdjsqv5h3aVvLOlPzRQ== | 2004-04-22 | Class II permissive change or modification of presently authorized equipment |
| ejWsadIDAL2RK2Pz+5k9yw== | 2004-03-08 | Class II permissive change or modification of presently authorized equipment |
| DEuz9zSqKN3/wMDS5X9nHQ== | 2003-12-15 | Class II permissive change or modification of presently authorized equipment |
| rot+V9DXV7Wd91Y/PfZpdA== | 2003-12-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VgyGK2538K8UrZe29iFoVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/10/2005 Application Dated: 01/10/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application VgyGK2538K8UrZe29iFoVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/10/2005 Application Dated: 01/10/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/12/2003 Application Dated: 12/12/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application rot+V9DXV7Wd91Y/PfZpdA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/12/2003 Application Dated: 12/12/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/26/2005 Application Dated: 08/26/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s)used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application N4AYvcoT0VrLiOTsn+vP1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/26/2005 Application Dated: 08/26/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s)used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/25/2005 Application Dated: 07/25/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s)used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Mv5GWBi3lVNnWa2OnSntHQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 07/25/2005 Application Dated: 07/25/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s)used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2004 Application Dated: 08/24/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is imited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM ntegrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application Km/omtsSUdl3cHjiwfgC5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/24/2004 Application Dated: 08/24/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is imited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM ntegrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/22/2004 Application Dated: 04/22/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is imited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application GSzPdjsqv5h3aVvLOlPzRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 04/22/2004 Application Dated: 04/22/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is imited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/08/2004 Application Dated: 03/08/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application ejWsadIDAL2RK2Pz+5k9yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/08/2004 Application Dated: 03/08/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/15/2003 Application Dated: 12/15/2003 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application DEuz9zSqKN3/wMDS5X9nHQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/15/2003 Application Dated: 12/15/2003 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/31/2005 Application Dated: 03/31/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bUaeFEm4WmGdRhFySwnamA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 03/31/2005 Application Dated: 03/31/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/04/2005 Application Dated: 01/04/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3kDwtZPwXZ9b5z+wQMY4zw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/04/2005 Application Dated: 01/04/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2200BG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PRO/Wireless 2200BG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.056 |
| Power Output listed is Conducted. Modular Approval. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. This module may only be installed by the OEM or an OEM integrator. Compliance of this module in its final configuration is the responsibility of the Grantee. Installation instructions for this module may not be provided to the end user. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |