FCC ID PD9WM3B2915ABG
IntelPRO/Wireless 2915ABG Network Connection
by Intel Corporation
Grantee Code: PD9 Product Code: WM3B2915ABG
Latest application date: 2006-12-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2006-12-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2006-10-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-10-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-01-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2005-09-01 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-09-01 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-12-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2004-12-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2004-10-15 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-10-15 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-23 |
| 5180-5240 MHz | Original Equipment | 2004-08-02 |
| 2412-2462 MHz | Original Equipment | 2004-08-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation manual | Users Manual | 2004-08-02 | PDF 1.3 MB |
| Sample Users manual | Users Manual | 2004-08-02 | PDF 1.3 MB |
| Sample user manual | Users Manual | 2004-08-02 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2006-10-28 | PDF 408.7 KB |
| Internal Photos | Internal Photos | 2006-01-18 | PDF 295.5 KB |
| Internal Photos | Internal Photos | 2004-12-24 | PDF 295.5 KB |
| Internal photos | Internal Photos | 2004-10-15 | PDF 295.5 KB |
| INternal photos | Internal Photos | 2004-08-02 | PDF 358.5 KB |
| Internal photos | Internal Photos | 2004-08-02 | PDF 358.5 KB |
| External Photos | External Photos | 2006-10-28 | PDF 177.6 KB |
| External Photos | External Photos | 2006-01-18 | PDF 105.2 KB |
| External Photos | External Photos | 2004-12-24 | PDF 105.2 KB |
| External photos | External Photos | 2004-10-15 | PDF 105.2 KB |
| External photos | External Photos | 2004-09-23 | PDF 105.2 KB |
| External photos | External Photos | 2004-08-02 | PDF 129.7 KB |
| Label and Location | ID Label/Location Info | 2006-10-28 | PDF 244.3 KB |
| FCC ID label info | ID Label/Location Info | 2004-08-02 | PDF 244.3 KB |
| Antenna information | Operational Description | 2004-09-23 | PDF 2.1 MB |
| Test Setup Photos | Test Setup Photos | 2006-12-01 | PDF 124.2 KB |
| Test Report | Test Setup Photos | 2006-10-28 | PDF 649.4 KB |
| Test Setup Photos | Test Setup Photos | 2006-10-28 | PDF 397.1 KB |
| Test Setup Photos | Test Setup Photos | 2006-01-18 | PDF 207.2 KB |
| Test Setup Photos | Test Setup Photos | 2004-12-24 | PDF 629.2 KB |
| Set up photos | Test Setup Photos | 2004-10-15 | PDF 370.6 KB |
| Setup photos | Test Setup Photos | 2004-10-15 | PDF 370.6 KB |
| Test setup | Test Setup Photos | 2004-09-23 | PDF 456.5 KB |
| Test setup photos | Test Setup Photos | 2004-09-23 | PDF 456.5 KB |
| Setup photos | Test Setup Photos | 2004-08-02 | PDF 1 MB |
| Test setup photos | Test Setup Photos | 2004-08-02 | PDF 1 MB |
| Test Report | Test Report | 2006-12-01 | PDF 338.9 KB |
| Test Report | Test Report | 2006-10-28 | PDF 771.8 KB |
| Test Report | Test Report | 2006-01-18 | PDF 665.7 KB |
| Test Report | Test Report | 2006-01-18 | PDF 410.7 KB |
| Test report | Test Report | 2005-09-01 | PDF 399 KB |
| Test Report | Test Report | 2004-12-24 | PDF 957.8 KB |
| Test Report | Test Report | 2004-12-24 | PDF 2.4 MB |
| Test report | Test Report | 2004-10-15 | PDF 616.1 KB |
| Test report | Test Report | 2004-10-15 | PDF 1.4 MB |
| Test report | Test Report | 2004-09-23 | PDF 728.5 KB |
| Test report 15247 | Test Report | 2004-09-23 | PDF 1.7 MB |
| Test report revised | Test Report | 2004-08-02 | PDF 987.7 KB |
| Test report revised | Test Report | 2004-08-02 | PDF 736.3 KB |
| Attestation Statement | Attestation Statements | 2006-12-01 | PDF 60.6 KB |
| Attestation Statement | Attestation Statements | 2006-10-28 | PDF 83.5 KB |
| US channel attestation | Cover Letter(s) | 2004-08-02 | PDF 178.1 KB |
| US only frequency attestation | Cover Letter(s) | 2004-08-02 | PDF 178.1 KB |
| Authorization Letter | Cover Letter(s) | 2006-12-01 | PDF 709.2 KB |
| DFS Letter | Cover Letter(s) | 2006-12-01 | PDF 149.4 KB |
| Authorization Letter | Cover Letter(s) | 2006-10-28 | PDF 779.3 KB |
| Cover Letter | Cover Letter(s) | 2006-10-28 | PDF 92.8 KB |
| Authorization Letter | Cover Letter(s) | 2006-01-18 | PDF 82.8 KB |
| Cover Letter | Cover Letter(s) | 2006-01-18 | PDF 74.5 KB |
| Antenna info | Cover Letter(s) | 2005-09-01 | PDF 214.3 KB |
| Antenna information | Cover Letter(s) | 2005-09-01 | PDF 214.3 KB |
| Reason for PC2 | Cover Letter(s) | 2005-09-01 | PDF 25.3 KB |
| Authorization Letter | Cover Letter(s) | 2004-12-24 | PDF 23.2 KB |
| Cover Letter | Cover Letter(s) | 2004-12-24 | PDF 77.4 KB |
| Antenna info | Cover Letter(s) | 2004-10-15 | PDF 1.3 MB |
| Antenna information | Cover Letter(s) | 2004-10-15 | PDF 1.3 MB |
| POA | Cover Letter(s) | 2004-10-15 | PDF 23.2 KB |
| Purpose of PC2 | Cover Letter(s) | 2004-10-15 | PDF 77.1 KB |
| Reason for PC2 | Cover Letter(s) | 2004-10-15 | PDF 77.1 KB |
| ATCB comments | Cover Letter(s) | 2004-09-23 | PDF 16.6 KB |
| Reason for PC2 | Cover Letter(s) | 2004-09-23 | PDF 77.6 KB |
| Response to ATCB | Cover Letter(s) | 2004-09-23 | PDF 84.4 KB |
| ATCB comments | Cover Letter(s) | 2004-08-02 | PDF 28.6 KB |
| Anti drug | Cover Letter(s) | 2004-08-02 | PDF 337.5 KB |
| DoC | Cover Letter(s) | 2004-08-02 | PDF 27.2 KB |
| Modular request | Cover Letter(s) | 2004-08-02 | PDF 18.5 KB |
| Request for confidentiality | Cover Letter(s) | 2004-08-02 | PDF 30.6 KB |
| Request for modular approval | Cover Letter(s) | 2004-08-02 | PDF 18.5 KB |
| Response to ATCB | Cover Letter(s) | 2004-08-02 | PDF 32 KB |
| anti drug | Cover Letter(s) | 2004-08-02 | PDF 337.5 KB |
| RF Exposure Antenna Data | RF Exposure Info | 2006-10-28 | PDF 1.3 MB |
| RF Exposure Info | RF Exposure Info | 2006-10-28 | PDF 707.3 KB |
| RF Exposure MPE | RF Exposure Info | 2006-10-28 | PDF 185.5 KB |
| RF Exposure Antenna Info | RF Exposure Info | 2006-01-18 | PDF 306.9 KB |
| RF Exposure MPE | RF Exposure Info | 2006-01-18 | PDF 108 KB |
| MPE | RF Exposure Info | 2005-09-01 | PDF 56.3 KB |
| R F Exposure Info Antenna Foxconn | RF Exposure Info | 2004-12-24 | PDF 559.2 KB |
| RF Exposure Acer 4050 | RF Exposure Info | 2004-12-24 | PDF 516.8 KB |
| RF Exposure Antenna Acer 4050 | RF Exposure Info | 2004-12-24 | PDF 516.8 KB |
| RF Exposure Antenna Amphenol | RF Exposure Info | 2004-12-24 | PDF 3 MB |
| RF Exposure Antenna Amphenol | RF Exposure Info | 2004-12-24 | PDF 2.7 MB |
| RF Exposure Antenna Hitachi | RF Exposure Info | 2004-12-24 | PDF 363.2 KB |
| RF Exposure Antenna Phycomp Yageo | RF Exposure Info | 2004-12-24 | PDF 906.9 KB |
| RF Exposure Info Antenna Acer | RF Exposure Info | 2004-12-24 | PDF 187.8 KB |
| RF Exposure Info Antenna Acer 2 | RF Exposure Info | 2004-12-24 | PDF 187.8 KB |
| RF Exposure Info MPE | RF Exposure Info | 2004-12-24 | PDF 119.9 KB |
| MPE | RF Exposure Info | 2004-10-15 | PDF 92 KB |
| MPE | RF Exposure Info | 2004-09-23 | PDF 96.2 KB |
| MPE | RF Exposure Info | 2004-08-02 | PDF 8.1 KB |
| Block diagram Metadata only | Block Diagram | PDF 50.4 KB | |
| Schematics Metadata only | Schematics | PDF 975.3 KB | |
| schematics Metadata only | Schematics | PDF 975.3 KB | |
| Operational description Metadata only | Operational Description | PDF 195.9 KB |
Application Information
| Application ID | xlBMKB5l057lMx1Sk8ca3g== |
|---|---|
| Final Action Date | 2006-12-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | WM3B2915ABG |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IntelPRO/Wireless 2915ABG Network Connection |
| Responsible Party | Steven C Hackett, Product Regulations Engineer, steven.c.hackett@intel.com  , 803-315-6704 |
| Technical Contact | Robert Paxman, Intel Corp, Robert.Paxman@intel.com , 503-712-8077 |
| Test Firm | Barbara Judge, Compliance Certification Services, bjudge@ccsemc.com  , 510-771-1104 |
| TCB Email | Hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xlBMKB5l057lMx1Sk8ca3g== | 2006-12-01 | Class II permissive change or modification of presently authorized equipment |
| xzVSUfaeOHY6rt/QOHIitg== | 2006-10-28 | Class II permissive change or modification of presently authorized equipment |
| h4eaZXkHpf+DfEF6Kg2iww== | 2006-10-28 | Class II permissive change or modification of presently authorized equipment |
| R18BGWorPGGAa5kMCVBVfw== | 2006-01-18 | Class II permissive change or modification of presently authorized equipment |
| 64eVyQcF7mPdEdcqAkqgIQ== | 2006-01-18 | Class II permissive change or modification of presently authorized equipment |
| iyavCDuUO9dWo8X2Wda5Jg== | 2005-09-01 | Class II permissive change or modification of presently authorized equipment |
| h4WUp2BXQ/GRH5hFE5pF9w== | 2005-09-01 | Class II permissive change or modification of presently authorized equipment |
| eSBRfCsvc5BlOpQZ/cJpNA== | 2004-12-24 | Class II permissive change or modification of presently authorized equipment |
| ZzPlLOZguNUqgrqpymTZzw== | 2004-12-24 | Class II permissive change or modification of presently authorized equipment |
| ZUw7ibwodXx5yGEBaWIymA== | 2004-10-15 | Class II permissive change or modification of presently authorized equipment |
| 8AmmkVcdMFyolh7iac3Ofg== | 2004-10-15 | Class II permissive change or modification of presently authorized equipment |
| oI+m/j8pxAqHAnrqZ1ONGA== | 2004-09-23 | Class II permissive change or modification of presently authorized equipment |
| +ZOXUeDYTtfZl6yOBMQn5Q== | 2004-09-23 | Class II permissive change or modification of presently authorized equipment |
| Y24cKATI9tDZgOlkOQeKRQ== | 2004-08-02 | Original Equipment |
| Dq4Owmc3InbojGOwIpVExw== | 2004-08-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZzPlLOZguNUqgrqpymTZzw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/24/2004 Application Dated: 12/24/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZzPlLOZguNUqgrqpymTZzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/24/2004 Application Dated: 12/24/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/15/2004 Application Dated: 10/15/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZUw7ibwodXx5yGEBaWIymA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/15/2004 Application Dated: 10/15/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Y24cKATI9tDZgOlkOQeKRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/28/2006 Application Dated: 10/27/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xzVSUfaeOHY6rt/QOHIitg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/28/2006 Application Dated: 10/27/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/01/2006 Application Dated: 11/30/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IntelPRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
EAS Grant - Application xlBMKB5l057lMx1Sk8ca3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/01/2006 Application Dated: 11/30/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IntelPRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/18/2006 Application Dated: 01/18/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.126 |
| Power Output is Conducted. Limited Modular Approval (LMA) limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The Grantee or OEM integrator must ensure the installation procedures comply with the integral antenna requirement of 15.407(d) which prevents end user from accessing the transmitter after installation. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application R18BGWorPGGAa5kMCVBVfw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/18/2006 Application Dated: 01/18/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.126 |
| Power Output is Conducted. Limited Modular Approval (LMA) limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The Grantee or OEM integrator must ensure the installation procedures comply with the integral antenna requirement of 15.407(d) which prevents end user from accessing the transmitter after installation. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/23/2004 Application Dated: 09/23/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oI+m/j8pxAqHAnrqZ1ONGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/23/2004 Application Dated: 09/23/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/01/2005 Application Dated: 09/01/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iyavCDuUO9dWo8X2Wda5Jg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/01/2005 Application Dated: 09/01/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.049 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.117 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/01/2005 Application Dated: 09/01/2005 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application h4WUp2BXQ/GRH5hFE5pF9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/01/2005 Application Dated: 09/01/2005 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/28/2006 Application Dated: 10/27/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application h4eaZXkHpf+DfEF6Kg2iww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/28/2006 Application Dated: 10/27/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/24/2004 Application Dated: 12/24/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application eSBRfCsvc5BlOpQZ/cJpNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 12/24/2004 Application Dated: 12/24/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Dq4Owmc3InbojGOwIpVExw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 08/02/2004 Application Dated: 08/02/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/15/2004 Application Dated: 10/15/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8AmmkVcdMFyolh7iac3Ofg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 10/15/2004 Application Dated: 10/15/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be coLlocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/18/2006 Application Dated: 01/18/2006 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.214 |
| Power Output is Conducted. Limited Modular Approval (LMA) limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The Grantee or OEM integrator must ensure the installation procedures comply with the integral antenna requirement of 15.407(d) which prevents end user from accessing the transmitter after installation. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 64eVyQcF7mPdEdcqAkqgIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 01/18/2006 Application Dated: 01/18/2006 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.214 |
| Power Output is Conducted. Limited Modular Approval (LMA) limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The Grantee or OEM integrator must ensure the installation procedures comply with the integral antenna requirement of 15.407(d) which prevents end user from accessing the transmitter after installation. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/23/2004 Application Dated: 09/23/2004 |
| Intel Corporation |
| 100 Center Point Circle |
| Suite 200 |
| Columbia, SC 29210 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +ZOXUeDYTtfZl6yOBMQn5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 United States |
Date of Grant: 09/23/2004 Application Dated: 09/23/2004 |
| Attention: Steven Hackett , Product Regulations Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PD9WM3B2915ABG |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel PRO/Wireless 2915ABG Network Connection |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.251 | ||
| CC | 15C | 5725.0 - 5850.0 | 0.209 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |