FCC ID PDC-IWM314XSW
Mobile Internet Location MGR
by At Road, Incorporated
Grantee Code: PDC Product Code: IWM314XSW
Latest application date: 2005-06-17
FCC ID Device Details
| FCC ID | PDC-IWM314XSW |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PDC |
| Product Code | IWM314XSW |
| Applicant Business | At Road, Incorporated 🇺🇸 |
| Related Domains |  road-inc.com |
| Equipment Class | Mobile Internet Location MGR |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2005-06-17 |
| 824.7-848.31 MHz | Original Equipment | 2005-06-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2005-06-17 | PDF 793.5 KB |
| Internal Photos | Internal Photos | 2005-06-17 | PDF 3.1 MB |
| WLAN internal photos 1 of 2 | Internal Photos | 2005-06-17 | PDF 1.3 MB |
| WLAN internal photos 2 of 2 | Internal Photos | 2005-06-17 | PDF 830 KB |
| External Photos | External Photos | 2005-06-17 | PDF 62.9 KB |
| WLAN external photos | External Photos | 2005-06-17 | PDF 1.2 MB |
| FCC ID label format | ID Label/Location Info | 2005-06-17 | PDF 108.5 KB |
| FCC ID label format and location | ID Label/Location Info | 2005-06-17 | PDF 108.5 KB |
| Original Test setup photos | Test Setup Photos | 2005-06-17 | PDF 519.6 KB |
| Test setup photos | Test Setup Photos | 2005-06-17 | PDF 255.3 KB |
| At road test report | Test Report | 2005-06-17 | PDF 693.4 KB |
| Original Licensed module test report | Test Report | 2005-06-17 | PDF 710.2 KB |
| Original WLAN test report 1 of 2 | Test Report | 2005-06-17 | PDF 965.7 KB |
| Original WLAN test report 2 of 2 | Test Report | 2005-06-17 | PDF 1.7 MB |
| Agent authorization letter | Cover Letter(s) | 2005-06-17 | PDF 287.4 KB |
| Antenna gain statement | Cover Letter(s) | 2005-06-17 | PDF 14.4 KB |
| Licensed Module authorization letter | Cover Letter(s) | 2005-06-17 | PDF 31.4 KB |
| Request for confidentiality letter | Cover Letter(s) | 2005-06-17 | PDF 292.7 KB |
| TCB Q and A | Cover Letter(s) | 2005-06-17 | PDF 16.2 KB |
| WLAN authorization letter | Cover Letter(s) | 2005-06-17 | PDF 257.1 KB |
| antenna gain statement | Cover Letter(s) | 2005-06-17 | PDF 14.4 KB |
| Antenna specification | Parts List/Tune Up Info | 2005-06-17 | PDF 126.3 KB |
| MPE Estimate | RF Exposure Info | 2005-06-17 | PDF 154.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 11.9 KB | |
| At road schematic diagram Metadata only | Schematics | PDF 128.4 KB | |
| Schematic Diagram 1 of 3 Metadata only | Schematics | PDF 128.4 KB | |
| Schematic Diagram 2 of 3 Metadata only | Schematics | PDF 33.9 KB | |
| Schematic diagram Metadata only | Schematics | PDF 177.5 KB | |
| Schematic diagram 3 of 3 Metadata only | Schematics | PDF 177.5 KB | |
| WLAN schematic diagram Metadata only | Schematics | PDF 33.9 KB | |
| At road theory of operation Metadata only | Operational Description | PDF 136.3 KB | |
| Operational desciption Metadata only | Operational Description | PDF 136.3 KB |
Application Information
| Application ID | YUsMh1frRJIMzNjGpwZerQ== |
|---|---|
| Final Action Date | 2005-06-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007405012 |
| Model | IWM314XSW |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Mobile Internet Location MGR |
| Responsible Party | Anil Tiwari, atiwari@road-inc.com , 510-870-1264 |
| Agent | Thu Thu Thu, Compliance Certification Services, thu.chan@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Composite device. Output power listed is conducted. This device contains a WLAN radio and a Part 22/24 radio in one single enclosure. Professional installation is required. The Antennas used by WLAN and Part 22/24 radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YUsMh1frRJIMzNjGpwZerQ== | 2005-06-17 | Original Equipment |
| 7kwqddeppgfrPh4qYLoJZw== | 2005-06-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YUsMh1frRJIMzNjGpwZerQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/17/2005 Application Dated: 06/17/2005 |
| At Road, Incorporated |
| 47071 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDC-IWM314XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Internet Location MGR |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.06531 |
| Composite device. Output power listed is conducted. This device contains a WLAN radio and a Part 22/24 radio in one single enclosure. Professional installation is required. The Antennas used by WLAN and Part 22/24 radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application YUsMh1frRJIMzNjGpwZerQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
At Road, Incorporated 47071 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 06/17/2005 Application Dated: 06/17/2005 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDC-IWM314XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Internet Location MGR |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.06531 |
| Composite device. Output power listed is conducted. This device contains a WLAN radio and a Part 22/24 radio in one single enclosure. Professional installation is required. The Antennas used by WLAN and Part 22/24 radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/17/2005 Application Dated: 06/17/2005 |
| At Road, Incorporated |
| 47071 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDC-IWM314XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Internet Location MGR |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 24E | 1851.25 - 1908.75 | 0.724 | 2.5 PM | 1M43F9W |
| 22H | 824.7 - 848.31 | 0.793 | 2.5 PM | 1M40F9W |
| Composite device. Output power listed is conducted. This device contains a WLAN radio and a Part 22/24 radio in one single enclosure. Professional installation is required. The antenna gain for Part 22/24 radio including cable loss must not exceed 5.1 dBi in Cellular Band and 3.9 dBi in PCS band , for purposes of 2.1043 and 2.1091. The Antennas used by WLAN and Part 22/24 radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 7kwqddeppgfrPh4qYLoJZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
At Road, Incorporated 47071 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 06/17/2005 Application Dated: 06/17/2005 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDC-IWM314XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Internet Location MGR |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 24E | 1851.25 - 1908.75 | 0.724 | 2.5 PM | 1M43F9W |
| 22H | 824.7 - 848.31 | 0.793 | 2.5 PM | 1M40F9W |
| Composite device. Output power listed is conducted. This device contains a WLAN radio and a Part 22/24 radio in one single enclosure. Professional installation is required. The antenna gain for Part 22/24 radio including cable loss must not exceed 5.1 dBi in Cellular Band and 3.9 dBi in PCS band , for purposes of 2.1043 and 2.1091. The Antennas used by WLAN and Part 22/24 radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |