FCC ID PDCILM272XSW
Internet Location Modem
by At Road, Incorporated
Grantee Code: PDC Product Code: ILM272XSW
Latest application date: 2002-08-12
FCC ID Device Details
| FCC ID | PDCILM272XSW |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PDC |
| Product Code | ILM272XSW |
| Applicant Business | At Road, Incorporated 🇺🇸 |
| Related Domains |  road-inc.com  etlsemko.com |
| Equipment Class | Internet Location Modem |
| Test Firm | Intertek Testing Services NA Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 825.27-847.77 MHz | Original Equipment | 2002-08-12 |
| 1851.25-1908.75 MHz | Original Equipment | 2002-08-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installer Guide | Users Manual | 2002-08-12 | PDF 575.1 KB |
| Internal Photo Part 1 | Internal Photos | 2002-08-12 | PDF 688 KB |
| Internal Photo Part 2 | Internal Photos | 2002-08-12 | PDF 439.6 KB |
| External Photos | External Photos | 2002-08-12 | PDF 168.4 KB |
| FCC ID Label | ID Label/Location Info | 2002-08-12 | PDF 188.5 KB |
| Test Setup Photos | Test Setup Photos | 2002-08-12 | PDF 200.6 KB |
| Out of Band Plots | Test Report | 2002-08-12 | PDF 3.6 MB |
| Test Report | Test Report | 2002-08-12 | PDF 2.5 MB |
| Request for Confidentiality | Cover Letter(s) | 2002-08-12 | PDF 73.7 KB |
| RF Exposure Info | RF Exposure Info | 2002-08-12 | PDF 27.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 14.7 KB | |
| Block Diagram 1 Metadata only | Block Diagram | PDF 140 KB | |
| Block Diagram 2 Metadata only | Block Diagram | PDF 61.3 KB | |
| Proprietary Block Diagram Metadata only | Block Diagram | PDF 14.7 KB | |
| Schematics Metadata only | Schematics | PDF 707.7 KB | |
| Detailed Circuit Description Metadata only | Operational Description | PDF 123.4 KB | |
| Detailed Circuit Description Metadata only | Operational Description | PDF 316 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 90.4 KB |
Application Information
| Application ID | SIhshUf8hh0uR3aTK4O8GQ== |
|---|---|
| Final Action Date | 2002-08-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007405012 |
| Model | ILM272XSW |
| Frequency Range | 825.27-847.77 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Internet Location Modem |
| Responsible Party | Anil Tiwari, atiwari@road-inc.com , 510-870-1264 |
| Agent | David David David, Intertek Testing Services, dchernom@etlsemko.com , 65-463-2900 |
| Technical Contact | David Chernomordik, Intertek Testing Services, dchernom@etlsemko.com , 650-463-2900 |
| Non-Technical Contact | Stephanie Smith, Intertek Testing Services, STsmith@etlsemko.com , 650-463-2900 |
| Test Firm | John Quigley, Intertek Testing Services NA Inc., john.quigley@intertek.com  , 949-448-4100 |
| TCB Email | rwg@etlsemko.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output is conducted. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SIhshUf8hh0uR3aTK4O8GQ== | 2002-08-12 | Original Equipment |
| FCzUpa03kN/iC/fIFlhGtw== | 2002-08-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SIhshUf8hh0uR3aTK4O8GQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 08/12/2002 Application Dated: 08/05/2002 |
| At Road, Incorporated |
| 47071 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDCILM272XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Internet Location Modem |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22.901(d) | 825.27 - 847.77 | 0.5 | 2.5 PM | 1M25F9W |
| Output is conducted. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application SIhshUf8hh0uR3aTK4O8GQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
At Road, Incorporated 47071 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 08/12/2002 Application Dated: 08/05/2002 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDCILM272XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Internet Location Modem |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22.901(d) | 825.27 - 847.77 | 0.5 | 2.5 PM | 1M25F9W |
| Output is conducted. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 08/12/2002 Application Dated: 08/12/2002 |
| At Road, Incorporated |
| 47071 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDCILM272XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Internet Location Modem |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 1.58 | 2.5 PM | 1M25F9W |
| Output is EIRP. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application FCzUpa03kN/iC/fIFlhGtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
At Road, Incorporated 47071 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 08/12/2002 Application Dated: 08/12/2002 |
| Attention: Anil Tiwari |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PDCILM272XSW |
| Name of Grantee: | At Road, Incorporated |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Internet Location Modem |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 1.58 | 2.5 PM | 1M25F9W |
| Output is EIRP. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |