FCC ID PEJ-93829283-MSD9

FCC ID	PEJ-93829283-MSD9
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	PEJ
Product Code	93829283MSD9
Applicant Business	Xetawave LLC 🇺🇸
Related Domains	xetawave.com
Equipment Class	MSD9

Frequency Range	Application Purpose	Final Action Date
928-929 MHz	Class II permissive change or modification of presently authorized equipment	2013-10-31
928-929 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-31
903.5-926.5 MHz	Original Equipment	2012-10-02
928-929 MHz	Original Equipment	2012-10-02
902.025-927.975 MHz	Original Equipment	2012-10-02

Document	Type	Available	File
Exhibit D Users Manual per 2 1033 b3	Users Manual	2012-10-02	PDF 550 KB
Exhibit D Users Manual per 2 1033 c3	Users Manual	2012-10-02	PDF 550 KB
Exhibit C Internal Photographs per 2 1033 b7	Internal Photos	2012-10-02	PDF 475.5 KB
Exhibit C Internal Photographs per 2 1033 c12	Internal Photos	2012-10-02	PDF 475.5 KB
Exhibit C External Photographs per 2 1033 b7	External Photos	2012-10-02	PDF 475.5 KB
Exhibit C External Photographs per 2 1033 c12	External Photos	2012-10-02	PDF 475.5 KB
Exhibit A ID Label and location per 2 1033 b7	ID Label/Location Info	2012-10-02	PDF 182.5 KB
Exhibit A ID Label and location per 2 1033 c2 and c11	ID Label/Location Info	2012-10-02	PDF 182.5 KB
Exhibit C RE Test Setup photographs	Test Setup Photos	2012-10-02	PDF 1.5 MB
Exhibit C RE Test Setup photographs	Test Setup Photos	2012-10-02	PDF 1.5 MB
Exhibit C RE Test Setup photographs	Test Setup Photos	2012-10-02	PDF 1.2 MB
Exhibit E Test Measurement Report per 2 1033 c14	Test Report	2013-10-31	PDF 2.2 MB
Exhibit E Test Measurement Report per 2 1033 c14	Test Report	2013-07-31	PDF 376.9 KB
Exhibit E Test Measurement Report per 2 1033 b6	Test Report	2012-10-02	PDF 3.5 MB
Exhibit E Test Measurement Report per 2 1033 b6	Test Report	2012-10-02	PDF 3.7 MB
Exhibit E Test Measurement Report per 2 1033 c14	Test Report	2012-10-02	PDF 2.4 MB
Cover Letter Requesting Class II Permissive Change	Cover Letter(s)	2013-10-31	PDF 68.4 KB
Cover Letter Requesting Class II Permissive Change	Cover Letter(s)	2013-07-31	PDF 30.7 KB
Cover Letter Requesting Confidentiality	Cover Letter(s)	2012-10-02	PDF 41.6 KB
Cover Letter Requesting Limited Modular Approval	Cover Letter(s)	2012-10-02	PDF 86 KB
Misc RF Exposure Exhibits	RF Exposure Info	2012-10-02	PDF 70.3 KB

Application ID	xaplIRN+GCMnabkpDPyuCw==
Final Action Date	2013-10-31
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0021979208
Model	-93829283-MSD9
Frequency Range	928-929 MHz
Equipment Class	TNB - Licensed Non-Broadcast Station Transmitter
Device Description	MSD9
Responsible Party	Craig Held, Executive VP, craig@xetawave.com , 3034472745
Technical Contact	David Greene, Xetawave LLC, dave@xetawave.com , 3034472745
Non-Technical Contact	Craig Held, Xetawave LLC, craig@xetawave.com , 3034472745
TCB Email	decrowder@elitetest.com
TCB Scope	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Limited Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Permissive Change to add emission designators.

Application ID	Date	Purpose
xaplIRN+GCMnabkpDPyuCw==	2013-10-31	Class II permissive change or modification of presently authorized equipment
HUY8l/2AY0sghcKAuLkggw==	2013-07-31	Class II permissive change or modification of presently authorized equipment
OM/yhMqfRibAfS0uJx5C3Q==	2012-10-02	Original Equipment
LJ3dVnoMrY6McGaWEyPvQA==	2012-10-02	Original Equipment
ESKU7JhPcO+E2WeTxomEYQ==	2012-10-02	Original Equipment

Frequency	Output	Tolerance	Emission	Rules
902.025-927.975 MHz	1.0000000			15C
903.5-926.5 MHz	1.0000000			15C
928-929 MHz	4	1.5ppm	9K90F1D	101
928-929 MHz	4	1.5ppm	16K8F1D	101
928-929 MHz	4	1.5ppm	11K7W1W	101
928-929 MHz	4	1.5ppm	12K2W1W	101
928-929 MHz	4	1.5ppm	11K9W1W	101
932-932.5 MHz	4	1.5ppm	11K9W1W	101
932-932.5 MHz	4	1.5ppm	11K7W1W	101
932-932.5 MHz	4	1.5ppm	9K90F1D	101
932-932.5 MHz	5	1.5ppm	16K8F1D	101
932-932.5 MHz	4	1.5ppm	12K2W1W	101
941-941.5 MHz	4	1.5ppm	11K9W1W	101
941-941.5 MHz	4	1.5ppm	11K7W1W	101
941-941.5 MHz	4	1.5ppm	9K90F1D	101
941-941.5 MHz	5	1.5ppm	16K8F1D	101
941-941.5 MHz	4	1.5ppm	12K2W1W	101
952-960 MHz	4	1.5ppm	11K9W1W	101
952-960 MHz	4	1.5ppm	11K7W1W	101
952-960 MHz	4	1.5ppm	9K90F1D	101
952-960 MHz	5	1.5ppm	16K8F1D	101
952-960 MHz	4	1.5ppm	12K2W1W	101

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515

Date of Grant: 10/31/2013

Application Dated: 10/31/2013

Xetawave LLC

258 South Taylor Ave

Louisville, CO 80027

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D
	101	928.0 - 929.0	4.0	1.5 PM	12K2W1W
	101	932.0 - 932.5	4.0	1.5 PM	12K2W1W
	101	941.0 - 941.5	4.0	1.5 PM	12K2W1W
	101	952.0 - 960.0	4.0	1.5 PM	12K2W1W
	101	928.0 - 929.0	4.0	1.5 PM	11K9W1W
	101	932.0 - 932.5	4.0	1.5 PM	11K9W1W
	101	941.0 - 941.5	4.0	1.5 PM	11K9W1W
	101	952.0 - 960.0	4.0	1.5 PM	11K9W1W
	101	928.0 - 929.0	4.0	1.5 PM	11K7W1W
	101	932.0 - 932.5	4.0	1.5 PM	11K7W1W
	101	941.0 - 941.5	4.0	1.5 PM	11K7W1W
	101	952.0 - 960.0	4.0	1.5 PM	11K7W1W

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Permissive Change to add emission designators.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States

Date of Grant: 10/31/2013

Application Dated: 10/31/2013

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D
	101	928.0 - 929.0	4.0	1.5 PM	12K2W1W
	101	932.0 - 932.5	4.0	1.5 PM	12K2W1W
	101	941.0 - 941.5	4.0	1.5 PM	12K2W1W
	101	952.0 - 960.0	4.0	1.5 PM	12K2W1W
	101	928.0 - 929.0	4.0	1.5 PM	11K9W1W
	101	932.0 - 932.5	4.0	1.5 PM	11K9W1W
	101	941.0 - 941.5	4.0	1.5 PM	11K9W1W
	101	952.0 - 960.0	4.0	1.5 PM	11K9W1W
	101	928.0 - 929.0	4.0	1.5 PM	11K7W1W
	101	932.0 - 932.5	4.0	1.5 PM	11K7W1W
	101	941.0 - 941.5	4.0	1.5 PM	11K7W1W
	101	952.0 - 960.0	4.0	1.5 PM	11K7W1W

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Permissive Change to add emission designators.

TCB Grant - Application OM/yhMqfRibAfS0uJx5C3Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Xetawave LLC

258 South Taylor Ave

Louisville, CO 80027

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Digital Transmission System
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.5 - 926.5	1.0

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Digital Transmission System
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.5 - 926.5	1.0

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application LJ3dVnoMrY6McGaWEyPvQA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Xetawave LLC

258 South Taylor Ave

Louisville, CO 80027

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application HUY8l/2AY0sghcKAuLkggw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515

Date of Grant: 07/31/2013

Application Dated: 07/31/2013

Xetawave LLC

258 South Taylor Ave

Louisville, CO 80027

Attention: Tim Stevens , Vice President Products

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	9K90F1D
	101	932.0 - 932.5	4.0	1.5 PM	9K90F1D
	101	941.0 - 941.5	4.0	1.5 PM	9K90F1D
	101	952.0 - 960.0	4.0	1.5 PM	9K90F1D
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to add 12.5kHz channel bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States

Date of Grant: 07/31/2013

Application Dated: 07/31/2013

Attention: Tim Stevens , Vice President Products

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	101	928.0 - 929.0	4.0	1.5 PM	9K90F1D
	101	932.0 - 932.5	4.0	1.5 PM	9K90F1D
	101	941.0 - 941.5	4.0	1.5 PM	9K90F1D
	101	952.0 - 960.0	4.0	1.5 PM	9K90F1D
	101	928.0 - 929.0	4.0	1.5 PM	16K8F1D
	101	932.0 - 932.5	5.0	1.5 PM	16K8F1D
	101	941.0 - 941.5	5.0	1.5 PM	16K8F1D
	101	952.0 - 960.0	5.0	1.5 PM	16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to add 12.5kHz channel bandwidth.

TCB Grant - Application ESKU7JhPcO+E2WeTxomEYQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Xetawave LLC

258 South Taylor Ave

Louisville, CO 80027

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.025 - 927.975	1.0

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States

Date of Grant: 10/02/2012

Application Dated: 10/02/2012

Attention: Craig Held , Executive VP

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PEJ-93829283-MSD9

Name of Grantee:	Xetawave LLC

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	MSD9
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.025 - 927.975	1.0

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Mail To:

FCC ID PEJ-93829283-MSD9

MSD9

by Xetawave LLC

Grantee Code: PEJ Product Code: 93829283MSD9

Latest application date: 2013-10-31

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application xaplIRN+GCMnabkpDPyuCw==

EAS Grant - Application xaplIRN+GCMnabkpDPyuCw==

TCB Grant - Application OM/yhMqfRibAfS0uJx5C3Q==

EAS Grant - Application OM/yhMqfRibAfS0uJx5C3Q==

TCB Grant - Application LJ3dVnoMrY6McGaWEyPvQA==

EAS Grant - Application LJ3dVnoMrY6McGaWEyPvQA==

TCB Grant - Application HUY8l/2AY0sghcKAuLkggw==

EAS Grant - Application HUY8l/2AY0sghcKAuLkggw==

TCB Grant - Application ESKU7JhPcO+E2WeTxomEYQ==

EAS Grant - Application ESKU7JhPcO+E2WeTxomEYQ==