FCC ID PEJ-XETA2

200MHz Data Transceiver

by Xetawave LLC

Grantee Code: PEJ   Product Code: XETA2
Latest application date: 2017-08-01

Device Images

FCC ID Device Details

FCC IDPEJ-XETA2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePEJ
Product CodeXETA2
Applicant BusinessXetawave LLC 🇺🇸
Related Domains xetawave.com
Equipment Class200MHz Data Transceiver
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
217-218 MHzClass II permissive change or modification of presently authorized equipment2017-08-01
217-218 MHzClass II permissive change or modification of presently authorized equipment2016-02-25
217-220 MHzOriginal Equipment2015-10-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-02-25PDF 562 KB
ManualUsers Manual2015-10-12PDF 519.6 KB
Internal Photograph pt1Internal Photos2015-10-12PDF 385.8 KB
Internal Photograph pt2Internal Photos2015-10-12PDF 395.4 KB
Internal Photograph pt3Internal Photos2015-10-12PDF 278.7 KB
External PhotographsExternal Photos2015-10-12PDF 352.9 KB
Label InformationID Label/Location Info2015-10-12PDF 173.6 KB
Test Configuration PhotographsTest Setup Photos2016-02-25PDF 114.2 KB
Test Configuration PhotographsTest Setup Photos2015-10-12PDF 748 KB
Test ReportTest Report2016-02-25PDF 2.3 MB
Test ReportTest Report2015-10-12PDF 2.3 MB
Justification LetterAttestation Statements2015-10-12PDF 352.6 KB
Modulation StatementAttestation Statements2015-10-12PDF 382.9 KB
Agent AuthorizationCover Letter(s)2017-08-01PDF 924.2 KB
Cover LetterCover Letter(s)2017-08-01PDF 95.7 KB
WaiverCover Letter(s)2017-08-01PDF 3.3 MB
Agent AuthorizationCover Letter(s)2016-02-25PDF 413.8 KB
Confidentiality RequestCover Letter(s)2016-02-25PDF 348.1 KB
Cover LetterCover Letter(s)2016-02-25PDF 26.8 KB
Confidentiality and Agent AuthorizationCover Letter(s)2015-10-12PDF 777.6 KB
Cover LetterCover Letter(s)2015-10-12PDF 27.1 KB
Modular LetterCover Letter(s)2015-10-12PDF 220.8 KB
MPERF Exposure Info2015-10-12PDF 58.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 84.8 KB
Schematics Metadata onlySchematicsPDF 587.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 229.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 222 KB
Software Security Metadata onlyOperational DescriptionPDF 378.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 365.8 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 12.6 KB

Application Information

Application ID5KhAAE2gfQWUgC+6swkl9Q==
Final Action Date2017-08-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021979208
ModelXETA2
Frequency Range217-218 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description200MHz Data Transceiver
Responsible PartyDAVID GREENE, Senior RF Engineer, david@xetawave.com , 3034472745
AgentDeniz Deniz Deniz, National Technical Systems, svdoc@nts.com , 5105783500
Technical ContactDeniz Demirci, National Technical Systems, svdoc@nts.com , 5105783500
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Emailsvtcb@nts.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverYes
Authorization Waiver ApprovedYes
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307 (b)(3). Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. Class II Permissive Change to add D1D emissions designators.

Applications

Application IDDatePurpose
5KhAAE2gfQWUgC+6swkl9Q==2017-08-01Class II permissive change or modification of presently authorized equipment
M0DDR3p5gTTxJ33CZDxmDg==2016-02-25Class II permissive change or modification of presently authorized equipment
BEkh5bYEbdkiznRuwaW2cg==2015-10-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
217-218 MHz20.7ppm171KF1D8
217-218 MHz20.7ppm176KG1D8
217-218 MHz20.7ppm176KD1D8
217-220 MHz20.7ppm11K1G1D9
217-220 MHz20.7ppm11K1D1D9
217-220 MHz20.7ppm16K8F1D9
217-220 MHz20.7ppm18K8G1D9
217-220 MHz20.7ppm40K7F1D9
217-220 MHz20.7ppm18K8D1D9
217-220 MHz20.7ppm44K5G1D9
217-220 MHz20.7ppm44K5D1D9
219-220 MHz20.7ppm171KF1D8
219-220 MHz20.7ppm176KG1D8
219-220 MHz20.7ppm176KD1D8
220-222 MHz30.7ppm7K90F1D9
220-222 MHz50.7ppm35K9G1D9
220-222 MHz50.7ppm11K7G1D9
220-222 MHz50.7ppm11K7D1D9
220-222 MHz20.7ppm32K9F1D9
220-222 MHz50.7ppm35K9D1D9

Grants

TCB Grant - Application M0DDR3p5gTTxJ33CZDxmDg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 02/25/2016

Application Dated: 02/25/2016
Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D
80 217.0  -  218.0 2.0 0.7  PM 171KF1D
80 217.0  -  218.0 2.0 0.7  PM 176KG1D
80 219.0  -  220.0 2.0 0.7  PM 171KF1D
80 219.0  -  220.0 2.0 0.7  PM 176KG1D

Output power listed is rated conducted power. This device must be installed such that the minimum separation distance listed in the filing is maintained between its antenna and all persons during normal operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is limited for use only in Xetawave end products as described in the filing.

EAS Grant - Application M0DDR3p5gTTxJ33CZDxmDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States
  Date of Grant: 02/25/2016

Application Dated: 02/25/2016
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D
80 217.0  -  218.0 2.0 0.7  PM 171KF1D
80 217.0  -  218.0 2.0 0.7  PM 176KG1D
80 219.0  -  220.0 2.0 0.7  PM 171KF1D
80 219.0  -  220.0 2.0 0.7  PM 176KG1D

Output power listed is rated conducted power. This device must be installed such that the minimum separation distance listed in the filing is maintained between its antenna and all persons during normal operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is limited for use only in Xetawave end products as described in the filing.



TCB Grant - Application BEkh5bYEbdkiznRuwaW2cg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 10/12/2015

Application Dated: 10/12/2015
Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D

Output power listed is rated conducted power. This device must be installed such that the minimum separation distance listed in the filing is maintained between its antenna and all persons during normal operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is limited for use only in Xetawave end products as described in the filing.

EAS Grant - Application BEkh5bYEbdkiznRuwaW2cg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States
  Date of Grant: 10/12/2015

Application Dated: 10/12/2015
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D

Output power listed is rated conducted power. This device must be installed such that the minimum separation distance listed in the filing is maintained between its antenna and all persons during normal operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Installers and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is limited for use only in Xetawave end products as described in the filing.



TCB Grant - Application 5KhAAE2gfQWUgC+6swkl9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 08/01/2017

Application Dated: 08/01/2017
Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 11K1D1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 18K8D1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 217.0  -  220.0 2.0 0.7  PM 44K5D1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 5.0 0.7  PM 11K7D1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D
90 220.0  -  222.0 5.0 0.7  PM 35K9D1D
80 217.0  -  218.0 2.0 0.7  PM 171KF1D
80 217.0  -  218.0 2.0 0.7  PM 176KG1D
80 217.0  -  218.0 2.0 0.7  PM 176KD1D
80 219.0  -  220.0 2.0 0.7  PM 171KF1D
80 219.0  -  220.0 2.0 0.7  PM 176KG1D
80 219.0  -  220.0 2.0 0.7  PM 176KD1D

Output power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307 (b)(3). Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. Class II Permissive Change to add D1D emissions designators.

EAS Grant - Application 5KhAAE2gfQWUgC+6swkl9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xetawave LLC
258 South Taylor Ave
Louisville, CO 80027
United States
  Date of Grant: 08/01/2017

Application Dated: 08/01/2017
 
Attention: DAVID GREENE , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PEJ-XETA2
Name of Grantee:  Xetawave LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 200MHz Data Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 217.0  -  220.0 2.0 0.7  PM 9K00F1D
90 217.0  -  220.0 2.0 0.7  PM 11K1G1D
90 217.0  -  220.0 2.0 0.7  PM 11K1D1D
90 217.0  -  220.0 2.0 0.7  PM 16K8F1D
90 217.0  -  220.0 2.0 0.7  PM 18K8G1D
90 217.0  -  220.0 2.0 0.7  PM 18K8D1D
90 217.0  -  220.0 2.0 0.7  PM 40K7F1D
90 217.0  -  220.0 2.0 0.7  PM 44K5G1D
90 217.0  -  220.0 2.0 0.7  PM 44K5D1D
90 220.0  -  222.0 3.0 0.7  PM 7K90F1D
90 220.0  -  222.0 5.0 0.7  PM 11K7G1D
90 220.0  -  222.0 5.0 0.7  PM 11K7D1D
90 220.0  -  222.0 2.0 0.7  PM 32K9F1D
90 220.0  -  222.0 5.0 0.7  PM 35K9G1D
90 220.0  -  222.0 5.0 0.7  PM 35K9D1D
80 217.0  -  218.0 2.0 0.7  PM 171KF1D
80 217.0  -  218.0 2.0 0.7  PM 176KG1D
80 217.0  -  218.0 2.0 0.7  PM 176KD1D
80 219.0  -  220.0 2.0 0.7  PM 171KF1D
80 219.0  -  220.0 2.0 0.7  PM 176KG1D
80 219.0  -  220.0 2.0 0.7  PM 176KD1D

Output power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307 (b)(3). Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. Class II Permissive Change to add D1D emissions designators.



Mail To: