FCC ID PGRBGW210

BGW210-700 ARRIS uDSL Wireless Residential Gateway

by ARRIS

Grantee Code: PGR   Product Code: BGW210
Latest application date: 2017-03-31

FCC ID Device Details

FCC IDPGRBGW210
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePGR
Product CodeBGW210
Applicant BusinessARRIS 🇺🇸
Related Domains commscope.com
Equipment ClassBGW210-700 ARRIS uDSL Wireless Residential Gateway
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2017-03-31
5180-5240 MHzOriginal Equipment2016-12-01
2412-2462 MHzOriginal Equipment2016-12-01

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-05-22PDF 1 MB
Int PhotosInternal Photos2017-05-22PDF 643.9 KB
Ext PhotosExternal Photos2017-05-22PDF 3 MB
LabelID Label/Location Info2016-12-01PDF 68.6 KB
Label 2ID Label/Location Info2016-12-01PDF 346 KB
Label LocID Label/Location Info2016-12-01PDF 529.7 KB
DFS Expidite LtrOperational Description2017-03-31PDF 342.6 KB
Op Desc MeshOperational Description2017-03-31PDF 367.3 KB
Tst PhotosTest Setup Photos2017-09-26PDF 761.5 KB
Tst PhotosTest Setup Photos2017-05-22PDF 1.4 MB
Tst RptTest Report2017-03-31PDF 1.5 MB
Tst Rpt DFSTest Report2017-03-31PDF 1.5 MB
Tst RepTest Report2016-12-01PDF 1.6 MB
Tst RepTest Report2016-12-01PDF 1.3 MB
Auth LtrCover Letter(s)2017-03-31PDF 237.3 KB
Confid LtrCover Letter(s)2017-03-31PDF 242.9 KB
Cvr LtrCover Letter(s)2017-03-31PDF 28.6 KB
Mesh LtrCover Letter(s)2017-03-31PDF 253.1 KB
Auth LtrCover Letter(s)2016-12-01PDF 237.7 KB
Confid LtrCover Letter(s)2016-12-01PDF 237.7 KB
Confid LtrCover Letter(s)2016-12-01PDF 243 KB
Cvr LtrCover Letter(s)2016-12-01PDF 28.4 KB
MPERF Exposure Info2017-03-31PDF 57.1 KB
MPERF Exposure Info2016-12-01PDF 56.7 KB
Blk Diag Metadata onlyBlock DiagramPDF 183.6 KB
Blk Diag 2 Metadata onlyBlock DiagramPDF 205.8 KB
Blk Diag 3 Metadata onlyBlock DiagramPDF 210.9 KB
Schematics Metadata onlySchematicsPDF 788.4 KB
Antenna Info Metadata onlyOperational DescriptionPDF 776.8 KB
DFS Expedite Ltr Metadata onlyOperational DescriptionPDF 342.6 KB
Op Desc Metadata onlyOperational DescriptionPDF 157.4 KB
Theory of Operation 2g Metadata onlyOperational DescriptionPDF 167 KB
Theory of Operation 5g Metadata onlyOperational DescriptionPDF 72.3 KB
UNII Security Metadata onlyOperational DescriptionPDF 444.1 KB
SDR Device Security Metadata onlySDR Software/Security InfPDF 605.3 KB
SDR Security Metadata onlySDR Software/Security InfPDF 548.3 KB
UNII Device Security Metadata onlySDR Software/Security InfPDF 444.5 KB

Application Information

Application IDz8SorS8nC8Nfq0KtC8UjWg==
Final Action Date2017-03-31
Application PurposeClass III permissive change to software defined radio
Applicant FRN0017832825
ModelBGW210
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionBGW210-700 ARRIS uDSL Wireless Residential Gateway
Responsible PartyJorge Villarreal, Dir. Product Compliance, jorge.villarreal@commscope.com , 215-323-1697
AgentMark Mark Mark, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500
Technical ContactMark Hill, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Emailsvtcb@nts.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/26/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11a/n/ac device with 802.11n/ac 4x4 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
z8SorS8nC8Nfq0KtC8UjWg==2017-03-31Class III permissive change to software defined radio
F681uA+bFBo0yB54J7IJVQ==2016-12-01Original Equipment
5ZorwKVaDcGrsSRc0N0Z0g==2016-12-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.870000015C68, CC, MO
5180-5240 MHz0.46815E38, 68, CC, MO
5180-5240 MHz0.49515E38, 68, CC, MO
5260-5320 MHz0.23215E38, 68, CC, MO
5500-5720 MHz0.24715E38, 68, CC, MO
5745-5825 MHz0.42615E38, 68, CC, MO

Grants

TCB Grant - Application z8SorS8nC8Nfq0KtC8UjWg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 03/31/2017

Application Dated: 03/30/2017
ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 68 CC MO 15E 5180.0  -  5240.0 0.495  
38 68 CC MO 15E 5260.0  -  5320.0 0.232  
38 68 CC MO 15E 5500.0  -  5720.0 0.247  
38 68 CC MO 15E 5745.0  -  5825.0 0.426  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11a/n/ac device with 802.11n/ac 4x4 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application z8SorS8nC8Nfq0KtC8UjWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
United States
  Date of Grant: 03/31/2017

Application Dated: 03/30/2017
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 68 CC MO 15E 5180.0  -  5240.0 0.495  
38 68 CC MO 15E 5260.0  -  5320.0 0.232  
38 68 CC MO 15E 5500.0  -  5720.0 0.247  
38 68 CC MO 15E 5745.0  -  5825.0 0.426  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11a/n/ac device with 802.11n/ac 4x4 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F681uA+bFBo0yB54J7IJVQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 12/01/2016

Application Dated: 11/23/2016
ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 68 CC MO 15E 5180.0  -  5240.0 0.468  
38 68 CC MO 15E 5745.0  -  5825.0 0.426  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11a/n/ac device with 802.11n/ac 4x4 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application F681uA+bFBo0yB54J7IJVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
United States
  Date of Grant: 12/01/2016

Application Dated: 11/23/2016
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 68 CC MO 15E 5180.0  -  5240.0 0.468  
38 68 CC MO 15E 5745.0  -  5825.0 0.426  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11a/n/ac device with 802.11n/ac 4x4 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5ZorwKVaDcGrsSRc0N0Z0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 12/01/2016

Application Dated: 11/23/2016
ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Digital Transmission System
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC MO 15C 2412.0  -  2462.0 0.87  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11b/g/n/ac device with 802.11n/ac 3x3 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes.

68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5ZorwKVaDcGrsSRc0N0Z0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARRIS
2500 Walsh Avenue
Santa Clara, CA 95051
United States
  Date of Grant: 12/01/2016

Application Dated: 11/23/2016
 
Attention: Jorge Villarreal , Dir. Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PGRBGW210
Name of Grantee:  ARRIS
Equipment Class: Digital Transmission System
Notes: BGW210-700 ARRIS uDSL Wireless Residential Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC MO 15C 2412.0  -  2462.0 0.87  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a 802.11b/g/n/ac device with 802.11n/ac 3x3 Spatial Multiplexing MIMO configurations as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes.


68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: