FCC ID PIDAIRSPAN-BSR900

BSR and SPRL Models with Internal Antenna

by Airspan Networks Inc

Grantee Code: PID   Product Code: AIRSPANBSR900
Latest application date: 2004-03-17

FCC ID Device Details

FCC IDPIDAIRSPAN-BSR900
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePID
Product CodeAIRSPANBSR900
Applicant BusinessAirspan Networks Inc 🇺🇸
Related Domains airspan.com
Equipment ClassBSR and SPRL Models with Internal Antenna
Test FirmHermon Laboratories Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903-927 MHzClass II permissive change or modification of presently authorized equipment2004-03-17
903-927 MHzOriginal Equipment2004-01-02

Exhibits

DocumentTypeAvailableFile
Users Manual Part 1Users Manual2004-01-02PDF 939.2 KB
Users Manual Part 2AUsers Manual2004-01-02PDF 1.7 MB
Users Manual Part 2BUsers Manual2004-01-02PDF 1.7 MB
Users Manual Part 3Users Manual2004-01-02PDF 3 MB
Internal PhotosInternal Photos2004-03-17PDF 265.9 KB
Internal PhotosInternal Photos2004-01-02PDF 338.6 KB
External PhotosExternal Photos2004-03-17PDF 76.5 KB
External PhotosExternal Photos2004-01-02PDF 53.8 KB
Label InfoID Label/Location Info2004-01-02PDF 123.8 KB
Label PlacementID Label/Location Info2004-01-02PDF 46.2 KB
Block DiagramBlock Diagram2004-01-02PDF 35.5 KB
Antenna InformationOperational Description2004-03-17PDF 513.1 KB
SPRL DescriptionOperational Description2004-03-17PDF 212.4 KB
Antenna SpecificationsOperational Description2004-01-02PDF 224.3 KB
Digital Modulation DescriptionOperational Description2004-01-02PDF 16.3 KB
Hybrid Mode Description RevisedOperational Description2004-01-02PDF 53.1 KB
System DescriptionOperational Description2004-01-02PDF 700 KB
Test PhotosTest Setup Photos2004-03-17PDF 641.3 KB
Test PhotosTest Setup Photos2004-01-02PDF 445.9 KB
Test ReportTest Report2004-03-17PDF 898.9 KB
Test ReportTest Report2004-01-02PDF 815.6 KB
Attestation Regarding ConnectionsCover Letter(s)2004-01-02PDF 117.5 KB
Confidentiality LetterCover Letter(s)2004-03-17PDF 13.6 KB
Copy of Original GrantCover Letter(s)2004-03-17PDF 115 KB
Description of ChangesCover Letter(s)2004-03-17PDF 13.3 KB
Comments 1Cover Letter(s)2004-01-02PDF 100.8 KB
Comments 2Cover Letter(s)2004-01-02PDF 58.9 KB
Confidentiality LetterCover Letter(s)2004-01-02PDF 14.1 KB
Professional Installation LetterCover Letter(s)2004-01-02PDF 16 KB
Response 1Cover Letter(s)2004-01-02PDF 17.2 KB
Response 2Cover Letter(s)2004-01-02PDF 13.8 KB
RF Exposure InfoRF Exposure Info2004-03-17PDF 8.4 KB
RF Exposure InfoRF Exposure Info2004-01-02PDF 9 KB
Schematics Metadata onlySchematicsPDF 134.1 KB
Schematics Metadata onlySchematicsPDF 136.2 KB

Application Information

Application IDQo+N6TZPtndCTGGfnhT5Nw==
Final Action Date2004-03-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009320326
ModelAIRSPAN-BSR900
Frequency Range903-927 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBSR and SPRL Models with Internal Antenna
Responsible PartyGrant Pottash, Technical Services Director, zlevi@airspan.com , +1-561-443-1009
Technical ContactEdward Usoskin, Hermon Laboratories, gonen@hermonlabs.com , 972 4 628-8001
Test FirmAlexander Usoskin, Hermon Laboratories Ltd., mail@hermonlabs.com , 972-4628-8001
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Configurations utilizing external antennas must be professionally installed and are prohibited from marketing to the General Public. Only the antennas documented in the filing are approved for use with this device. The use of different antennas than previously approved for this device requires the applicant to file a Class II permissive change. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Qo+N6TZPtndCTGGfnhT5Nw==2004-03-17Class II permissive change or modification of presently authorized equipment
4c8lLtukPSserEtPj+vXxg==2004-01-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
903-927 MHz0.063000015CCE

Grants

TCB Grant - Application Qo+N6TZPtndCTGGfnhT5Nw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/17/2004

Application Dated: 03/17/2004
Airspan Networks Inc
777 Yamato Rd
Suite 310
Boca Raton, FL 33431
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDAIRSPAN-BSR900
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: BSR and SPRL Models with Internal Antenna
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 903.0  -  927.0 0.063  

Power Output listed is conducted. Configurations utilizing external antennas must be professionally installed and are prohibited from marketing to the General Public. Only the antennas documented in the filing are approved for use with this device. The use of different antennas than previously approved for this device requires the applicant to file a Class II permissive change. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Qo+N6TZPtndCTGGfnhT5Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airspan Networks Inc
777 Yamato Rd Suite 310
Boca Raton, FL 33431
United States
  Date of Grant: 03/17/2004

Application Dated: 03/17/2004
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDAIRSPAN-BSR900
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: BSR and SPRL Models with Internal Antenna
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 903.0  -  927.0 0.063  

Power Output listed is conducted. Configurations utilizing external antennas must be professionally installed and are prohibited from marketing to the General Public. Only the antennas documented in the filing are approved for use with this device. The use of different antennas than previously approved for this device requires the applicant to file a Class II permissive change. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 4c8lLtukPSserEtPj+vXxg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/02/2004

Application Dated: 01/02/2004
Airspan Networks Inc
777 Yamato Rd
Suite 310
Boca Raton, FL 33431
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDAIRSPAN-BSR900
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Radio (BSR)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 903.0  -  927.0 0.063  

Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antennas documented in the filing are approved for use with this device. The use of a different antenna not previously approved for this device or the use of an internal antenna requires the applicant to file a Class II permissive change. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 4c8lLtukPSserEtPj+vXxg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airspan Networks Inc
777 Yamato Rd Suite 310
Boca Raton, FL 33431
United States
  Date of Grant: 01/02/2004

Application Dated: 01/02/2004
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDAIRSPAN-BSR900
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Radio (BSR)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 903.0  -  927.0 0.063  

Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antennas documented in the filing are approved for use with this device. The use of a different antenna not previously approved for this device or the use of an internal antenna requires the applicant to file a Class II permissive change. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: