FCC ID PIDMMAX58

Base Station Transceiver

by Airspan Networks Inc

Grantee Code: PID   Product Code: MMAX58
Latest application date: 2006-10-29

FCC ID Device Details

FCC IDPIDMMAX58
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePID
Product CodeMMAX58
Applicant BusinessAirspan Networks Inc 🇺🇸
Related Domains airspan.com
Equipment ClassBase Station Transceiver
Test FirmHermon Laboratories Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5728-5847 MHzClass II permissive change or modification of presently authorized equipment2006-10-29
5740-5835 MHzOriginal Equipment2006-09-13

Exhibits

DocumentTypeAvailableFile
Users Manual RevisedUsers Manual2006-09-13PDF 885.2 KB
Internal Photos RevisedInternal Photos2006-09-13PDF 3.5 MB
External PhotosExternal Photos2006-09-13PDF 25.9 KB
Label Location RevisedID Label/Location Info2006-09-13PDF 32 KB
Block DiagramBlock Diagram2006-09-13PDF 17.4 KB
Antenna InformationOperational Description2006-09-13PDF 9.7 KB
Operational DescriptionOperational Description2006-09-13PDF 23.5 KB
Test SetupTest Setup Photos2006-10-29PDF 24.6 KB
Test PhotosTest Setup Photos2006-09-13PDF 83.5 KB
Test ReportTest Report2006-10-29PDF 1.5 MB
Test Report RevisedTest Report2006-09-13PDF 1.4 MB
Cover LetterCover Letter(s)2006-10-29PDF 11.6 KB
CommentsCover Letter(s)2006-09-13PDF 44.7 KB
Confidentiality LetterCover Letter(s)2006-09-13PDF 9.1 KB
ResponseCover Letter(s)2006-09-13PDF 6.6 KB
RF Exposure InformationRF Exposure Info2006-09-13PDF 6.1 KB

Application Information

Application ID+tmVvdS7N7A3Hww9AP7p4g==
Final Action Date2006-10-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009320326
ModelMMAX58
Frequency Range5728-5847 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBase Station Transceiver
Responsible PartyGrant Pottash, Technical Services Director, zlevi@airspan.com , +1-561-443-1009
Technical ContactAlex Usoskin, Hermon Labrotories, mail@hermonlabs.com , +972 4628 8001
Test FirmAlexander Usoskin, Hermon Laboratories Ltd., mail@hermonlabs.com , 972-4628-8001
TCB Emailhotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance

Applications

Application IDDatePurpose
+tmVvdS7N7A3Hww9AP7p4g==2006-10-29Class II permissive change or modification of presently authorized equipment
imI1wgtLyGF+CTURgAXzfQ==2006-09-13Original Equipment

Equipment Authorization

FrequencyOutputRules
5728-5847 MHz0.155000015C
5740-5835 MHz0.155000015C

Grants

TCB Grant - Application imI1wgtLyGF+CTURgAXzfQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/13/2006

Application Dated: 09/12/2006
Airspan Networks Inc
777 Yamato Rd
Suite 310
Boca Raton, FL 33431
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDMMAX58
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5740.0  -  5835.0 0.155  

Power output is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application imI1wgtLyGF+CTURgAXzfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airspan Networks Inc
777 Yamato Rd Suite 310
Boca Raton, FL 33431
United States
  Date of Grant: 09/13/2006

Application Dated: 09/12/2006
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDMMAX58
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5740.0  -  5835.0 0.155  

Power output is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



TCB Grant - Application +tmVvdS7N7A3Hww9AP7p4g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/29/2006

Application Dated: 10/27/2006
Airspan Networks Inc
777 Yamato Rd
Suite 310
Boca Raton, FL 33431
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDMMAX58
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5728.0  -  5847.0 0.155  

Power Output is Conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance

EAS Grant - Application +tmVvdS7N7A3Hww9AP7p4g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airspan Networks Inc
777 Yamato Rd Suite 310
Boca Raton, FL 33431
United States
  Date of Grant: 10/29/2006

Application Dated: 10/27/2006
 
Attention: Grant Pottash , Technical Services Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PIDMMAX58
Name of Grantee:  Airspan Networks Inc
Equipment Class: Digital Transmission System
Notes: Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5728.0  -  5847.0 0.155  

Power Output is Conducted. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance



Mail To: