FCC ID PJ7-1901

eMTC Module

by Shenzhen Neoway Technology Co., Ltd.

Grantee Code: PJ7   Product Code: 1901
Latest application date: 2018-05-08

FCC ID Device Details

FCC IDPJ7-1901
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePJ7
Product Code1901
Applicant BusinessShenzhen Neoway Technology Co., Ltd. 🇨🇳
Related Domains neoway.com
Equipment ClasseMTC Module
Test FirmIndustrial Internet Innovation Center (Shanghai)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699.7-715.3 MHzOriginal Equipment2018-05-08

Exhibits

DocumentTypeAvailableFile
UM-V2Users Manual2018-05-08PDF 2 MB
I18D00007 photoInternal Photos2018-05-08PDF 206.7 KB
I18D00007 Auxiliary photoExternal Photos2018-05-08PDF 1 MB
I18D00007 photoExternal Photos2018-05-08PDF 206.7 KB
labelID Label/Location Info2018-05-08PDF 39.7 KB
Part 15B setup photoTest Setup Photos2018-05-08PDF 241.8 KB
Part 24 setup photo-V1Test Setup Photos2018-05-08PDF 189.9 KB
Part 27 setup photoTest Setup Photos2018-05-08PDF 187.4 KB
I18D00007-EMC01Test Report2018-05-08PDF 558 KB
I18D00007-RFA01Test Report2018-05-08PDF 1.2 MB
Authority to Act as AgentCover Letter(s)2018-05-08PDF 154.8 KB
ConfidentialityCover Letter(s)2018-05-08PDF 305 KB
Modular Approval Letter-V2Cover Letter(s)2018-05-08PDF 207.6 KB
I18D00007-SAR01-V1RF Exposure Info2018-05-08PDF 373.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 8.1 KB
Schematics Metadata onlySchematicsPDF 273.1 KB
Operational Description-V1 Metadata onlyOperational DescriptionPDF 126.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 69.3 KB
tune up Metadata onlyParts List/Tune Up InfoPDF 133.5 KB

Application Information

Application IDeYb3lg4L/NWa/ozu+bc4dA==
Final Action Date2018-05-08
Application PurposeOriginal Equipment
Applicant FRN0021988548
Model1901
Frequency Range699.7-715.3 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptioneMTC Module
Responsible PartyJesse Yuan, yuan.geng@neoway.com , +86 18813937316
Technical ContactAnlu Yu, East china institute of Telecommunications, yuanlu@ecit.org.cn
Test FirmZheng Zhongbin, Industrial Internet Innovation Center (Shanghai), zhangyu@3in.org , 86-21-63843300
TCB Emailhotline@acbcert.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 24/27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device only supports narrowband operation with 1.4 MHz Bandwidth in LTE Bands 2/4/12/13 (LTE Cat-M1).

Applications

Application IDDatePurpose
eYb3lg4L/NWa/ozu+bc4dA==2018-05-08Original Equipment
DKUMjnGjFO/mhfd+c86SCw==2018-05-08Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699.7-715.3 MHz0.1790.1ppm1M11W7D27BC
699.7-715.3 MHz0.1530.1ppm1M11G7D27BC
779.5-784.5 MHz0.1810.1ppm1M11W7D27BC
779.5-784.5 MHz0.1750.1ppm1M11G7D27BC
1710.7-1754.3 MHz0.1780.1ppm1M11W7D27BC
1710.7-1754.3 MHz0.1630.1ppm1M11G7D27BC
1850.7-1909.3 MHz0.1850.1ppm1M12W7D24EBC
1850.7-1909.3 MHz0.1590.1ppm1M11G7D24EBC

Grants

TCB Grant - Application eYb3lg4L/NWa/ozu+bc4dA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/08/2018

Application Dated: 05/08/2018
Shenzhen Neoway Technology Co., Ltd.
4F-2#, Lianjian Science & Industry Park
Huarong Road, Dalang, Longhua District
Shenzhen, 518100
China
 
Attention: Jesse Yuan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJ7-1901
Name of Grantee:  Shenzhen Neoway Technology Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: eMTC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 24E 1850.7  -  1909.3 0.185 0.1  PM 1M12W7D
BC 24E 1850.7  -  1909.3 0.159 0.1  PM 1M11G7D
BC 27 1710.7  -  1754.3 0.178 0.1  PM 1M11W7D
BC 27 1710.7  -  1754.3 0.163 0.1  PM 1M11G7D
BC 27 699.7  -  715.3 0.179 0.1  PM 1M11W7D
BC 27 699.7  -  715.3 0.153 0.1  PM 1M11G7D
BC 27 779.5  -  784.5 0.181 0.1  PM 1M11W7D
BC 27 779.5  -  784.5 0.175 0.1  PM 1M11G7D

Power out is conducted at the antenna terminal. Single Modular Approval.

This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 24/27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device only supports narrowband operation with 1.4 MHz Bandwidth in LTE Bands 2/4/12/13 (LTE Cat-M1).


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application eYb3lg4L/NWa/ozu+bc4dA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Neoway Technology Co., Ltd.
4F-2#, Lianjian Science & Industry Park Huarong Road, Dalang, Longhua District
Shenzhen, 518100
China
  Date of Grant: 05/08/2018

Application Dated: 05/08/2018
 
Attention: Jesse Yuan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJ7-1901
Name of Grantee:  Shenzhen Neoway Technology Co., Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: eMTC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 24E 1850.7  -  1909.3 0.185 0.1  PM 1M12W7D
BC 24E 1850.7  -  1909.3 0.159 0.1  PM 1M11G7D
BC 27 1710.7  -  1754.3 0.178 0.1  PM 1M11W7D
BC 27 1710.7  -  1754.3 0.163 0.1  PM 1M11G7D
BC 27 699.7  -  715.3 0.179 0.1  PM 1M11W7D
BC 27 699.7  -  715.3 0.153 0.1  PM 1M11G7D
BC 27 779.5  -  784.5 0.181 0.1  PM 1M11W7D
BC 27 779.5  -  784.5 0.175 0.1  PM 1M11G7D

Power out is conducted at the antenna terminal. Single Modular Approval.

This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 24/27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device only supports narrowband operation with 1.4 MHz Bandwidth in LTE Bands 2/4/12/13 (LTE Cat-M1).


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application DKUMjnGjFO/mhfd+c86SCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/08/2018

Application Dated: 05/08/2018
Shenzhen Neoway Technology Co., Ltd.
4F-2#, Lianjian Science & Industry Park
Huarong Road, Dalang, Longhua District
Shenzhen, 518100
China
 
Attention: Jesse Yuan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJ7-1901
Name of Grantee:  Shenzhen Neoway Technology Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: eMTC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

This device contains LTE transmitter.

EAS Grant - Application DKUMjnGjFO/mhfd+c86SCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Neoway Technology Co., Ltd.
4F-2#, Lianjian Science & Industry Park Huarong Road, Dalang, Longhua District
Shenzhen, 518100
China
  Date of Grant: 05/08/2018

Application Dated: 05/08/2018
 
Attention: Jesse Yuan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJ7-1901
Name of Grantee:  Shenzhen Neoway Technology Co., Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: eMTC Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

This device contains LTE transmitter.



Mail To: