1. FCC ID
  2. PJM
  3. PJMCVNDA

FCC ID PJMCVNDA

RFID Reader (Payment Terminal)

by Feig Electronic GmbH

Grantee Code: PJM   Product Code: CVNDA
Latest application date: 2023-10-18

FCC ID Device Details

FCC IDPJMCVNDA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePJM
Product CodeCVNDA
Applicant BusinessFeig Electronic GmbH 🇩🇪
Related Domains feig.de
Equipment ClassRFID Reader (Payment Terminal)
Test FirmCTC advanced GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2023-10-18

Exhibits

DocumentTypeAvailableFile
Users_ManualUsers Manual2023-10-18PDF 888.8 KB
Internal_PhotosInternal Photos2023-10-18PDF 601.5 KB
External_PhotosExternal Photos2023-10-18PDF 276.2 KB
ID_Label_Location_InfoID Label/Location Info2023-10-18PDF 76.1 KB
Test_Setup_PhotosTest Setup Photos2023-10-18PDF 563.2 KB
Test_report_NFCTest Report2023-10-18PDF 1.2 MB
2.911(d)(5)_Attestation_LetterAttestation Statements2023-10-18PDF 963.1 KB
2.911(d)(7)_Attestation_LetterAttestation Statements2023-10-18PDF 71.5 KB
RSP-100_Annex_D_-_Modular_Approval_AttestationCover Letter(s)2023-10-18PDF 60.9 KB
FCC_Confidentiality_RequestCover Letter(s)2023-10-18PDF 17.8 KB
RF_Exposure_EvaluationRF Exposure Info2023-10-18PDF 505.1 KB
Block_Diagram Metadata onlyBlock DiagramPDF 27.6 KB
PCB_Prints_Antenna Metadata onlySchematicsPDF 52.9 KB
PCB_Prints_Core Metadata onlySchematicsPDF 1.1 MB
PCB_Prints_SAM_Extension Metadata onlySchematicsPDF 243.8 KB
Schematics_Antenna Metadata onlySchematicsPDF 69.1 KB
Schematics_Core Metadata onlySchematicsPDF 1 MB
Schematics_SAM_Extension Metadata onlySchematicsPDF 306 KB
Operational_Description Metadata onlyOperational DescriptionPDF 15.6 KB
Parts_List_Antenna Metadata onlyParts List/Tune Up InfoPDF 40.4 KB
Parts_List_Core Metadata onlyParts List/Tune Up InfoPDF 74.6 KB
Parts_List_SAM_Extension Metadata onlyParts List/Tune Up InfoPDF 37.3 KB

Application Information

Application ID4otUKG5+MWRQY/dRF+te0w==
Final Action Date2023-10-18
Application PurposeOriginal Equipment
Applicant FRN0007634793
ModelCVNDA
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionRFID Reader (Payment Terminal)
Responsible PartyElmar Reichwein, Manager, elmar.reichwein@feig.de , +49 6471 31090
Test FirmGerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com , 49-681-598-0
TCB EmailTCB@ctcadvanced.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis limited modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties. The module has not been tested stand alone, has no shielding and no internal power supply and is limited to be used in host devices that contain identically subassembly as shown in this filing. Other configurations are not approved and require separate testing and certification. RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
4otUKG5+MWRQY/dRF+te0w==2023-10-18Original Equipment

Equipment Authorization

FrequencyRules
13.56 MHz15C

Grants

TCB Grant - Application 4otUKG5+MWRQY/dRF+te0w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany 		Date of Grant: 10/18/2023

Application Dated: 10/18/2023
Feig Electronic GmbH
Industriestrasse 1a
Weilburg-Waldhausen, D-35781
Germany
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMCVNDA
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Reader (Payment Terminal)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 13.56  -  13.56  

This limited modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties. The module has not been tested stand alone, has no shielding and no internal power supply and is limited to be used in host devices that contain identically subassembly as shown in this filing. Other configurations are not approved and require separate testing and certification. RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application 4otUKG5+MWRQY/dRF+te0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Feig Electronic GmbH
Industriestrasse 1a
Weilburg-Waldhausen, D-35781
Germany 		  Date of Grant: 10/18/2023

Application Dated: 10/18/2023
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMCVNDA
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Reader (Payment Terminal)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 13.56  -  13.56  

This limited modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties. The module has not been tested stand alone, has no shielding and no internal power supply and is limited to be used in host devices that contain identically subassembly as shown in this filing. Other configurations are not approved and require separate testing and certification. RF exposure compliance is addressed for §1.1310 and §2.1091 MPE limits. End users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: