1. FCC ID
  2. PJM
  3. PJMLRU3000

FCC ID PJMLRU3000

RFID Equipment

by Feig Electronic GmbH

Grantee Code: PJM   Product Code: LRU3000
Latest application date: 2020-03-16

FCC ID Device Details

FCC IDPJMLRU3000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePJM
Product CodeLRU3000
Applicant BusinessFeig Electronic GmbH 🇩🇪
Related Domains feig.de
Equipment ClassRFID Equipment
Test FirmTUV SUD Product Service GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.7-927.2 MHzClass II permissive change or modification of presently authorized equipment2020-03-16
902.7-927.2 MHzClass II permissive change or modification of presently authorized equipment2014-01-27
902.7-927.2 MHzOriginal Equipment2010-03-03

Exhibits

DocumentTypeAvailableFile
UMUsers Manual2014-01-27PDF 972 KB
User Manaul IIUsers Manual2010-03-03PDF 853.3 KB
User ManualUsers Manual2010-03-03PDF 414.6 KB
Internal photosInternal Photos2020-09-09PDF 767.1 KB
Int photosInternal Photos2014-01-27PDF 1.1 MB
Internal PhotosInternal Photos2010-03-03PDF 1.4 MB
External PhotosExternal Photos2020-09-09PDF 832.7 KB
Ext photosExternal Photos2014-01-27PDF 756.9 KB
External pHotosExternal Photos2010-03-03PDF 375.9 KB
LabelID Label/Location Info2014-01-27PDF 212.8 KB
ID Label Location InfoID Label/Location Info2010-03-03PDF 101.8 KB
Test Setup PhotosTest Setup Photos2020-09-09PDF 840.6 KB
Test setup photosTest Setup Photos2014-01-27PDF 1 MB
Test Setup PhotosTest Setup Photos2010-03-03PDF 892.6 KB
Test ReportTest Report2020-03-16PDF 1.2 MB
Antenna descriptionTest Report2014-01-27PDF 377.3 KB
Test rep 3Test Report2014-01-27PDF 670.4 KB
Test report 1Test Report2014-01-27PDF 1.9 MB
Test report 2Test Report2014-01-27PDF 1.8 MB
Annex II to Test ReportTest Report2010-03-03PDF 1.8 MB
Annex III to Test ReportTest Report2010-03-03PDF 1.9 MB
Annex to Test ReportTest Report2010-03-03PDF 221.5 KB
Test ReportTest Report2010-03-03PDF 2.2 MB
Class II Permissive ChangeCover Letter(s)2020-03-16PDF 47.5 KB
ConfidentialityCover Letter(s)2020-03-16PDF 525.9 KB
Declaration of authorizationCover Letter(s)2020-03-16PDF 355.8 KB
M90115-0e-ID-B_ANTU290290_FCCCover Letter(s)2020-03-16PDF 528.1 KB
M90117-0e-ID-B_ANTU580290_FCCCover Letter(s)2020-03-16PDF 430.3 KB
Confid requestCover Letter(s)2014-01-27PDF 235.3 KB
Declaration on equalityCover Letter(s)2014-01-27PDF 201.5 KB
POACover Letter(s)2014-01-27PDF 312.2 KB
Auhtorization letterCover Letter(s)2010-03-03PDF 102.1 KB
PoACover Letter(s)2010-03-03PDF 536.3 KB
Request for ConfidentialityCover Letter(s)2010-03-03PDF 1.2 MB
RF Exposure InfoRF Exposure Info2020-03-16PDF 10.1 KB
RF Exp calculationRF Exposure Info2014-01-27PDF 74.9 KB
MPERF Exposure Info2010-03-03PDF 171.8 KB

Application Information

Application IDcyOS0tqyHdf4bu1ICHYN8A==
Final Action Date2020-03-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007634793
ModelLRU3000
Frequency Range902.7-927.2 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRFID Equipment
Responsible PartyElmar Reichwein, Manager, elmar.reichwein@feig.de , +49 6471 31090
AgentAnja Anja Anja, TUEV NORD Hochfrequenztechnik GmbH & Co. KG, ahittigrademacher@tuev-nord.de , 4922188889511
Technical ContactReinhard Monno, FEIG Electronic GmbH, reinhard.monno@feig.de , 496473109428
Non-Technical ContactElmar Reichwein, FEIG Electronic GmbH, elmar.reichwein@feig.de , 4964713109438
Test FirmMarkus Biberger, TUV SUD Product Service GmbH, markus.biberger@tuev-sued.de , 499421552253
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/09/2020
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: This change add new antennas with model numbers: - ID ANT.U290/290-FCC - ID ANT.U580/290-FCC Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed. PCC2 on component changes.

Applications

Application IDDatePurpose
cyOS0tqyHdf4bu1ICHYN8A==2020-03-16Class II permissive change or modification of presently authorized equipment
7gL7EoChHPXgfcs2P4Fvpg==2014-01-27Class II permissive change or modification of presently authorized equipment
hqxJk6qCqbh+QrotdxQuTQ==2010-03-03Original Equipment

Equipment Authorization

FrequencyOutputRules
902.7-927.2 MHz1.000000015C

Grants

TCB Grant - Application hqxJk6qCqbh+QrotdxQuTQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 03/03/2010

Application Dated: 03/03/2010
Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed.


EAS Grant - Application hqxJk6qCqbh+QrotdxQuTQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany 		  Date of Grant: 03/03/2010

Application Dated: 03/03/2010
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed.



TCB Grant - Application cyOS0tqyHdf4bu1ICHYN8A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 03/16/2020

Application Dated: 03/12/2020
Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Equipment
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

C2PC: This change add new antennas with model numbers: - ID ANT.U290/290-FCC - ID ANT.U580/290-FCC

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed.

PCC2 on component changes.


EAS Grant - Application cyOS0tqyHdf4bu1ICHYN8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany 		  Date of Grant: 03/16/2020

Application Dated: 03/12/2020
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Equipment
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

C2PC: This change add new antennas with model numbers: - ID ANT.U290/290-FCC - ID ANT.U580/290-FCC

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed.

PCC2 on component changes.



TCB Grant - Application 7gL7EoChHPXgfcs2P4Fvpg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 01/27/2014

Application Dated: 01/27/2014
Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed. PCC2 on component changes

EAS Grant - Application 7gL7EoChHPXgfcs2P4Fvpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Feig Electronic GmbH
Lange Straße 4
Weilburg-Waldhausen, D-35781
Germany 		  Date of Grant: 01/27/2014

Application Dated: 01/27/2014
 
Attention: Elmar Reichwein , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PJMLRU3000
Name of Grantee:  Feig Electronic GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.7  -  927.2 1.0  

Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed. PCC2 on component changes



Mail To: