FCC ID PJMMRU200
UHF Reader
by Feig Electronic GmbH
Grantee Code: PJM Product Code: MRU200
Latest application date: 2009-08-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-20 |
| 902.75-927.25 MHz | Original Equipment | 2007-12-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2009-08-20 | PDF 5.6 MB |
| Installation Manual | Users Manual | 2007-12-21 | PDF 340.9 KB |
| Internal Pictures 1 | Internal Photos | 2009-08-20 | PDF 1.6 MB |
| Internal Pictures 2 | Internal Photos | 2009-08-20 | PDF 1.6 MB |
| Internal Photos | Internal Photos | 2007-12-21 | PDF 410 KB |
| External Pictures 1 | External Photos | 2009-08-20 | PDF 1 MB |
| External Pictures 2 | External Photos | 2009-08-20 | PDF 1 MB |
| External Photos | External Photos | 2007-12-21 | PDF 147.9 KB |
| Photos Antenna | External Photos | 2007-12-21 | PDF 129.1 KB |
| Label Info | ID Label/Location Info | 2009-08-20 | PDF 150.4 KB |
| Label ID and Location Info | ID Label/Location Info | 2007-12-21 | PDF 66.6 KB |
| Test Setup Photos 1 | Test Setup Photos | 2009-08-20 | PDF 2 MB |
| Test Setup Photos 2 | Test Setup Photos | 2009-08-20 | PDF 5 MB |
| Test Setup Photos | Test Setup Photos | 2007-12-21 | PDF 303.7 KB |
| Test Equipment List | Test Report | 2009-08-20 | PDF 90.1 KB |
| Test Report 1 | Test Report | 2009-08-20 | PDF 2 MB |
| Test Report 2 | Test Report | 2009-08-20 | PDF 2.7 MB |
| Test Report 3 | Test Report | 2009-08-20 | PDF 2.5 MB |
| Test Report | Test Report | 2007-12-21 | PDF 1.5 MB |
| Antenna Info | Cover Letter(s) | 2009-08-20 | PDF 957.8 KB |
| Applicant Letter | Cover Letter(s) | 2009-08-20 | PDF 53.9 KB |
| Modification | Cover Letter(s) | 2009-08-20 | PDF 14.7 KB |
| Request for Confidentiality | Cover Letter(s) | 2009-08-20 | PDF 68.8 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2007-12-21 | PDF 136.6 KB |
| MPE Calculation | RF Exposure Info | 2007-12-21 | PDF 25.9 KB |
Application Information
| Application ID | QzSAT1t+EpkRA7fAlyF2WQ== |
|---|---|
| Final Action Date | 2009-08-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007634793 |
| Model | MRU200 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | UHF Reader |
| Responsible Party | Elmar Reichwein, Manager, elmar.reichwein@feig.de  , +49 6471 31090 |
| Agent | Johann Johann Johann, TÜV SÜD SENTON GmbH, j.roidt@senton.de  , +49 9421 5522 13 |
| Test Firm | Rainer Heller, TUV SUD Product Service GmbH PS-EMC-STR, rainer.heller@tuev-sued.de  , 49-09421-5522-20 |
| TCB Email | Dollitz.Uwe@Phoenix-Testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. Professional Installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change Filing adds additional antennas (same type but higher antenna gain as originally filed) and housing type. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QzSAT1t+EpkRA7fAlyF2WQ== | 2009-08-20 | Class II permissive change or modification of presently authorized equipment |
| M6wiO8yNI2F7n1i7EeyI9Q== | 2007-12-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QzSAT1t+EpkRA7fAlyF2WQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/20/2009 Application Dated: 08/19/2009 |
| Feig Electronic GmbH |
| Lange Straße 4 |
| Weilburg-Waldhausen, D-35781 Germany |
| Attention: Elmar Reichwein , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJMMRU200 |
| Name of Grantee: | Feig Electronic GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.281 |
| Output Power listed is conducted. Professional Installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change Filing adds additional antennas (same type but higher antenna gain as originally filed) and housing type. |
EAS Grant - Application QzSAT1t+EpkRA7fAlyF2WQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Feig Electronic GmbH Lange Straße 4 Weilburg-Waldhausen, D-35781 Germany |
Date of Grant: 08/20/2009 Application Dated: 08/19/2009 |
| Attention: Elmar Reichwein , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJMMRU200 |
| Name of Grantee: | Feig Electronic GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.281 |
| Output Power listed is conducted. Professional Installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change Filing adds additional antennas (same type but higher antenna gain as originally filed) and housing type. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM ICT Services GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 12/21/2007 Application Dated: 12/21/2007 |
| Feig Electronic GmbH |
| Lange Straße 4 |
| Weilburg-Waldhausen, D-35781 Germany |
| Attention: Elmar Reichwein , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJMMRU200 |
| Name of Grantee: | Feig Electronic GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.354 |
| Professional Installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions. Installers and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application M6wiO8yNI2F7n1i7EeyI9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Feig Electronic GmbH Lange Straße 4 Weilburg-Waldhausen, D-35781 Germany |
Date of Grant: 12/21/2007 Application Dated: 12/21/2007 |
| Attention: Elmar Reichwein , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJMMRU200 |
| Name of Grantee: | Feig Electronic GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.354 |
| Professional Installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions. Installers and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: |