FCC ID PJZ5228XG
XGSPON ONT
by DZS Inc.
Grantee Code: PJZ Product Code: 5228XG
Latest application date: 2024-10-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-10-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-10-23 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-27 |
| 2412-2462 MHz | Original Equipment | 2023-06-01 |
| 5180-5240 MHz | Original Equipment | 2023-06-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2025-04-21 | PDF 2.1 MB |
| PJZ5228XG_User Guide | Users Manual | 2023-11-29 | PDF 4.3 MB |
| Internal photos | Internal Photos | 2025-04-21 | PDF 4.8 MB |
| PJZ5228XG_InPho | Internal Photos | 2023-11-29 | PDF 3.8 MB |
| External photos | External Photos | 2025-04-21 | PDF 2.1 MB |
| PJZ5228XG_ExPho | External Photos | 2023-11-29 | PDF 1.1 MB |
| ID label and location | ID Label/Location Info | 2024-10-23 | PDF 341.4 KB |
| PJZ5228XG_Label | ID Label/Location Info | 2023-06-01 | PDF 70.7 KB |
| PJZ5228XG_Label Location | ID Label/Location Info | 2023-06-01 | PDF 90.1 KB |
| Test photo | Test Setup Photos | 2025-04-21 | PDF 780.3 KB |
| PJZ5228XG_Tsup_Antenna Report | Test Setup Photos | 2024-02-24 | PDF 1.5 MB |
| PJZ5228XG_Tsup_NII_DFS | Test Setup Photos | 2024-02-24 | PDF 56.2 KB |
| PJZ5228XG_Tsup_NII_U-NII-2 | Test Setup Photos | 2024-02-24 | PDF 295.9 KB |
| PJZ5228XG_Tsup_DTS_WLAN 2.4G | Test Setup Photos | 2023-11-29 | PDF 241.7 KB |
| PJZ5228XG_Tsup_NII_U-NII-1,3 | Test Setup Photos | 2023-11-29 | PDF 280 KB |
| Test report | Test Report | 2024-10-23 | PDF 854.4 KB |
| Test report | Test Report | 2024-10-23 | PDF 863.9 KB |
| PJZ5228XG_Antenna Report | Test Report | 2023-08-27 | PDF 2.4 MB |
| PJZ5228XG_TestRpt_NII_DFS_r2 | Test Report | 2023-08-27 | PDF 4.9 MB |
| PJZ5228XG_TestRpt_NII_U-NII-2_Part1-4 | Test Report | 2023-08-27 | PDF 5.5 MB |
| PJZ5228XG_TestRpt_NII_U-NII-2_Part2-4 | Test Report | 2023-08-27 | PDF 5.6 MB |
| PJZ5228XG_TestRpt_NII_U-NII-2_Part3-4 | Test Report | 2023-08-27 | PDF 5.6 MB |
| PJZ5228XG_TestRpt_NII_U-NII-2_Part4-4 | Test Report | 2023-08-27 | PDF 4.7 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part1-7_r2 | Test Report | 2023-06-01 | PDF 5.3 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part2-7_r1 | Test Report | 2023-06-01 | PDF 5.7 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part3-7 | Test Report | 2023-06-01 | PDF 5.5 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part4-7 | Test Report | 2023-06-01 | PDF 5.6 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part5-7 | Test Report | 2023-06-01 | PDF 5.5 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part6-7 | Test Report | 2023-06-01 | PDF 5.5 MB |
| PJZ5228XG_TestRpt_DTS_WLAN 2.4G_Part7-7 | Test Report | 2023-06-01 | PDF 2.3 MB |
| PJZ5228XG_TestRpt_NII_U-NII-1,3_Part1-4_r1 | Test Report | 2023-06-01 | PDF 5.3 MB |
| PJZ5228XG_TestRpt_NII_U-NII-1,3_Part2-4_r1 | Test Report | 2023-06-01 | PDF 5.4 MB |
| PJZ5228XG_TestRpt_NII_U-NII-1,3_Part3-4_r1 | Test Report | 2023-06-01 | PDF 5.4 MB |
| PJZ5228XG_TestRpt_NII_U-NII-1,3_Part4-4_r1 | Test Report | 2023-06-01 | PDF 2.8 MB |
| Attestation_Statement | Attestation Statements | 2024-10-23 | PDF 142.9 KB |
| Product Modifications | Attestation Statements | 2024-10-23 | PDF 161.6 KB |
| US_Agent | Attestation Statements | 2024-10-23 | PDF 74.8 KB |
| PJZ5228XG_cvrltr_Certification_2.911d5(i) | Attestation Statements | 2023-08-27 | PDF 91.6 KB |
| PJZ5228XG_cvrltr_Certification_2.911d5(ii) | Attestation Statements | 2023-08-27 | PDF 91.6 KB |
| PJZ5228XG_cvrltr_Certification_2.911d7 | Attestation Statements | 2023-08-27 | PDF 152.6 KB |
| PJZ5228XG_cvrltr_Certification_2.911d5 | Attestation Statements | 2023-06-01 | PDF 118.7 KB |
| Confidentiality | Cover Letter(s) | 2024-10-23 | PDF 151.8 KB |
| Letter Authorization | Cover Letter(s) | 2024-10-23 | PDF 69.8 KB |
| PJZ5228XG_cvrltr_FCC Class II Permissive Change | Cover Letter(s) | 2023-08-27 | PDF 143.6 KB |
| PJZ5228XG_cvrltr_FCC Long-term Confidentiality | Cover Letter(s) | 2023-08-27 | PDF 102.6 KB |
| PJZ5228XG_cvrltr_FCC POA | Cover Letter(s) | 2023-08-27 | PDF 113.5 KB |
| PJZ5228XG_cvrltr_FCC Short-term Confidentiality | Cover Letter(s) | 2023-08-27 | PDF 120.4 KB |
| PJZ5228XG_cvrltr_FCC TPC Declaration | Cover Letter(s) | 2023-08-27 | PDF 68.3 KB |
| PJZ5228XG_cvrltr_FCC Long-term Confidentiality | Cover Letter(s) | 2023-06-01 | PDF 128.3 KB |
| PJZ5228XG_cvrltr_FCC POA | Cover Letter(s) | 2023-06-01 | PDF 147.6 KB |
| PJZ5228XG_cvrltr_FCC Short-term Confidentiality | Cover Letter(s) | 2023-06-01 | PDF 157.3 KB |
| MPE | RF Exposure Info | 2024-10-23 | PDF 275.9 KB |
| PJZ5228XG_TestRpt_RFExp | RF Exposure Info | 2023-08-27 | PDF 426 KB |
| PJZ5228XG_TestRpt_MPE | RF Exposure Info | 2023-06-01 | PDF 793.8 KB |
| PJZ5228XG_BlckDic Metadata only | Block Diagram | PDF 145.5 KB | |
| PJZ5228XG_SchemDic Metadata only | Schematics | PDF 2.2 MB | |
| PJZ5228XG_OpDes_r1 Metadata only | Operational Description | PDF 82.1 KB | |
| PJZ5228XG_OpDes_r1 Metadata only | Operational Description | PDF 82.5 KB | |
| PJZ5228XG_Device SW Security Statement Metadata only | SDR Software/Security Inf | PDF 86.5 KB | |
| PJZ5228XG_Device SW Security Statement_r1 Metadata only | SDR Software/Security Inf | PDF 85.2 KB | |
| PJZ5228XG_PartsLst Metadata only | Parts List/Tune Up Info | PDF 116.7 KB | |
| PJZ5228XG_TunPro Metadata only | Parts List/Tune Up Info | PDF 89.9 KB | |
| PJZ5228XG_TunPro Metadata only | Parts List/Tune Up Info | PDF 79.3 KB |
Application Information
| Application ID | zKwnpRi+YiCM7wz+F+m/Mg== |
|---|---|
| Final Action Date | 2024-10-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004367017 |
| Model | 5228XG |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | XGSPON ONT |
| Responsible Party | Scott Agnew, SVP Global R&D;, scott.agnew@dzsi.com  , 510-777-7000 |
| Technical Contact | Joan Fang, Shenzhen Haiyun Standard Technical CO., Ltd., fangqiong@hy-lab.cn  , 15813720192 |
| Non-Technical Contact | Joan Fang, Shenzhen Haiyun Standard Technical CO., Ltd., fangqiong@hy-lab.cn , 15813720192 |
| Test Firm | Lin Chen, Shenzhen Haiyun Standard Technical CO., Ltd., chenlin@hy-lab.cn , 18824863674 |
| TCB Email | elabscert@applus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/21/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | CIIPC as described in this filing. Output power listed is maximum combined conducted power. The device is a 4x4 MIMO as is described in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. The device contains 20MHz, 40MHz, 80MHz and 160MHz signal bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zKwnpRi+YiCM7wz+F+m/Mg== | 2024-10-23 | Class II permissive change or modification of presently authorized equipment |
| WU/TmN2AoZS7p54cfs+52Q== | 2024-10-23 | Class II permissive change or modification of presently authorized equipment |
| 4iiop1l8CzjfaDcXkgcjCQ== | 2023-08-27 | Class II permissive change or modification of presently authorized equipment |
| EZ723pHc4/aKsSb4uj2kZQ== | 2023-06-01 | Original Equipment |
| /oE2h3gNrlnGgLZ49p7k0g== | 2023-06-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zKwnpRi+YiCM7wz+F+m/Mg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 10/23/2024 Application Dated: 10/23/2024 |
| DZS Inc. |
| 5700 Tennyson Parkway |
| Suite 400 |
| Plano, TX 75024 |
| Attention: Scott Agnew , SVP Global R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1422 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2328 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| CIIPC as described in this filing. Output power listed is maximum combined conducted power. The device is a 4x4 MIMO as is described in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. The device contains 20MHz, 40MHz, 80MHz and 160MHz signal bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application zKwnpRi+YiCM7wz+F+m/Mg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DZS Inc. 5700 Tennyson Parkway Suite 400 Plano, TX 75024 United States |
Date of Grant: 10/23/2024 Application Dated: 10/23/2024 |
| Attention: Scott Agnew , SVP Global R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1422 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2328 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| CIIPC as described in this filing. Output power listed is maximum combined conducted power. The device is a 4x4 MIMO as is described in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. The device contains 20MHz, 40MHz, 80MHz and 160MHz signal bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 10/23/2024 Application Dated: 10/23/2024 |
| DZS Inc. |
| 5700 Tennyson Parkway |
| Suite 400 |
| Plano, TX 75024 |
| Attention: Scott Agnew , SVP Global R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XGSPON ONT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9484 |
| CIIPC as described in this filing. Output power listed is maximum combined conducted power. The device is a 3x3 MIMO as is described in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. The device contains 20MHz and 40MHz signal bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WU/TmN2AoZS7p54cfs+52Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DZS Inc. 5700 Tennyson Parkway Suite 400 Plano, TX 75024 United States |
Date of Grant: 10/23/2024 Application Dated: 10/23/2024 |
| Attention: Scott Agnew , SVP Global R&D |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XGSPON ONT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9484 |
| CIIPC as described in this filing. Output power listed is maximum combined conducted power. The device is a 3x3 MIMO as is described in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. The device contains 20MHz and 40MHz signal bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/01/2023 Application Dated: 05/30/2023 |
| DZS Inc. |
| 5700 Tennyson Parkway |
| Suite 400 |
| Plano, TX 75024 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XGSPON ONT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9484 |
| Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application EZ723pHc4/aKsSb4uj2kZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DZS Inc. 5700 Tennyson Parkway Suite 400 Plano, TX 75024 United States |
Date of Grant: 06/01/2023 Application Dated: 05/30/2023 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | XGSPON ONT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9484 |
| Power listed is maximum combined conducted output power. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/27/2023 Application Dated: 08/03/2023 |
| DZS Inc. |
| 5700 Tennyson Parkway |
| Suite 400 |
| Plano, TX 75024 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.1422 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2328 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| Class II Permissive Change: Enable UNII-2A and UNII-2C band via software. Output Power listed is the maximum conducted output power. This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 4iiop1l8CzjfaDcXkgcjCQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DZS Inc. 5700 Tennyson Parkway Suite 400 Plano, TX 75024 United States |
Date of Grant: 08/27/2023 Application Dated: 08/03/2023 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.1422 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2328 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| Class II Permissive Change: Enable UNII-2A and UNII-2C band via software. Output Power listed is the maximum conducted output power. This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/01/2023 Application Dated: 05/30/2023 |
| DZS Inc. |
| 5700 Tennyson Parkway |
| Suite 400 |
| Plano, TX 75024 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| Output Power listed is the maximum conducted output power. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /oE2h3gNrlnGgLZ49p7k0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DZS Inc. 5700 Tennyson Parkway Suite 400 Plano, TX 75024 United States |
Date of Grant: 06/01/2023 Application Dated: 05/30/2023 |
| Attention: DongWoo Kim , SVP Global Hardware |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PJZ5228XG |
| Name of Grantee: | DZS Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | XGSPON ONT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.6124 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.9908 |
| Output Power listed is the maximum conducted output power. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |