FCC ID PKRISGRM4210

Output power listed is conducted. This device supports

1.4/3/5/10/15/20 MHz channel bandwidths for LTE Band 2, 4, 25 and 66;

1.4/3/5/10 MHz channel bandwidths for LTE Band 5 and 12;

5/10 MHz channel bandwidths for LTE Band 17;

1.4/3/5/10/15 MHz channel bandwidths for LTE Band 26;

5/10/15/20 MHz channel bandwidths for LTE Band 38, 41 and 71;

5/10/15/20/25/30/35/40 MHz channel bandwidths for 5GNR Band n2, n25 and n66;

5/10/15/20 MHz channel bandwidths for 5GNR Band n5;

5/10/15 MHz channel bandwidths for 5GNR Band n12;

5/10/15/20 MHz channel bandwidths for 5GNR Band n26;

10/15/20/25/30/40 MHz channel bandwidths for 5GNR Band n38;

10/15/20/25/30/35/40/45/50/60/70/80/90/100 MHz channel bandwidths for 5GNR Band n41;

5/10/15/20 MHz channel bandwidths for 5GNR Band n71;

10/15/20/25/30/35/40/50/60/70/80/90/100 MHz channel bandwidths for 5GNR Band n77 and n78;

The antenna gain, including cable loss, must not exceed 6.9 dBi in Band 71; 7.6 dBi in Band 12 and 17; 8.4 dBi in Band 5 and 26; 4.5 dBi in Band 4 and 66; 6.5 dBi in Band 2 and 25; 8.0 dBi in Band 38; 5.5 dBi in Band 41; 3.0 dBi in Band 77 and 78. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this device with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design.

Output power listed is conducted. This device supports

5/10/15/20 MHz bandwidths in LTE Band 48;

10/15/20/30/40 MHz bandwidths in 5GNR Band n48;

The antenna gain, including cable loss, must not exceed 3.0 dBi in Band 48. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this device with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design.

Output power listed is conducted. This device supports 1.4/3/5/10/15/20 MHz channel bandwidths for LTE Band 2, 4, 25 and 66; 1.4/3/5/10 MHz channel bandwidths for LTE Band 5 and 12; 5/10 MHz channel bandwidths for LTE Band 17; 1.4/3/5/10/15 MHz channel bandwidths for LTE Band 26; 5/10/15/20 MHz channel bandwidths for LTE Band 38, 41 and 71;

5/10/15/20/25/30/35/40 MHz channel bandwidths for 5GNR Band n2, n25 and n66; 5/10/15/20 MHz channel bandwidths for 5GNR Band n5; 5/10/15 MHz channel bandwidths for 5GNR Band n12; 5/10/15/20 MHz channel bandwidths for 5GNR Band n26; 10/15/20/25/30/40 MHz channel bandwidths for 5GNR Band n38; 10/15/20/25/30/35/40/45/50/60/70/80/90/100 MHz channel bandwidths for 5GNR Band n41; 5/10/15/20 MHz channel bandwidths for 5GNR Band n71; 10/15/20/25/30/35/40/50/60/70/80/90/100 MHz channel bandwidths for 5GNR Band n77 and n78;

The antenna gain, including cable loss, must not exceed 6.9 dBi in Band 71; 7.6 dBi in Band 12 and 17; 8.4 dBi in Band 5 and 26; 4.5 dBi in Band 4 and 66; 6.5 dBi in Band 2 and 25; 8.0 dBi in Band 38; 5.5 dBi in Band 41; 3.0 dBi in Band 77 and 78. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this device with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design.

Class II Permissive Change: Enable additional 4G-LTE uplink SA, CA, and additional 5G-FR1 uplink SA, CA, NSA ENDC are enabled by this device as described in this filing.