FCC ID PKRNVWE760D
PCI Express Mini Card
by Novatel Wireless
Grantee Code: PKR Product Code: NVWE760D
Latest application date: 2009-09-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-01 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-03 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-05-15 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-07 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-06 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-06 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-06 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-05 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-03 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-03 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-27 |
| 824.7-848.31 MHz | Change in identification of presently authorized equipment. Original FCC ID: PKRNVWE760 Grant Date: 01/09/2009 | 2009-02-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-12-01 | PDF 1.4 MB |
| User Manual | Users Manual | 2009-08-03 | PDF 533 KB |
| User Manual 1 | Users Manual | 2009-06-03 | PDF 1.4 MB |
| User Manual 2 | Users Manual | 2009-06-03 | PDF 21.1 KB |
| Qiao User Guide Inspiron 910 | Users Manual | 2009-05-15 | PDF 2.8 MB |
| Qiao User Manual Inspiron 910 | Users Manual | 2009-05-15 | PDF 21.1 KB |
| Tiger User Manual Inspiron 1010 | Users Manual | 2009-05-15 | PDF 21.1 KB |
| User Manual Inspiron 1010 | Users Manual | 2009-05-15 | PDF 938.5 KB |
| User Manual 1 | Users Manual | 2009-04-07 | PDF 2.4 MB |
| User Manual 2 | Users Manual | 2009-04-07 | PDF 1.9 MB |
| User Manual 3 | Users Manual | 2009-04-07 | PDF 21.1 KB |
| User Manual 2 | Users Manual | 2009-04-06 | PDF 2.1 MB |
| User Manual 1 | Users Manual | 2009-03-06 | PDF 1.8 MB |
| User Manual | Users Manual | 2009-03-03 | PDF 2.4 MB |
| User Manual 2 | Users Manual | 2009-03-03 | PDF 1.1 MB |
| User Manual 2 | Users Manual | 2009-03-03 | PDF 1.5 MB |
| User Manual 2 | Users Manual | 2009-02-27 | PDF 2.3 MB |
| Qiao Antenna Location Report Inspiron 910 | Internal Photos | 2009-05-15 | PDF 200 KB |
| Qiao Interior Photo Inspiron 910 | Internal Photos | 2009-05-15 | PDF 250.3 KB |
| Qiao WWAN Info File I Inspiron 910 | Internal Photos | 2009-05-15 | PDF 537.4 KB |
| Qiao WWAN Regulatory Info File II Inspiron 910 | Internal Photos | 2009-05-15 | PDF 979.2 KB |
| Tiger Antenna Info Inspiron 1010 | Internal Photos | 2009-05-15 | PDF 577.4 KB |
| Tiger Antenna Location Inspiron 1010 | Internal Photos | 2009-05-15 | PDF 694 KB |
| Tiger Internal Photo Inspiron 1010 | Internal Photos | 2009-05-15 | PDF 160.4 KB |
| WiMax WLAN Info Inspiron 1010 | Internal Photos | 2009-05-15 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2009-04-07 | PDF 34.3 KB |
| Internal Photos | Internal Photos | 2009-02-27 | PDF 33.3 KB |
| Qiao Exterior Bottom Photo Inspiron 910 | External Photos | 2009-05-15 | PDF 141.7 KB |
| Qiao Exterior Top Open Photo | External Photos | 2009-05-15 | PDF 134.1 KB |
| Qiao Exterior Top Photo Inspiron 910 | External Photos | 2009-05-15 | PDF 105.2 KB |
| Tiger External Bottom Photo Inspiron 1010 | External Photos | 2009-05-15 | PDF 131.5 KB |
| Tiger External Top Open Photo Inspiron 1010 | External Photos | 2009-05-15 | PDF 153.5 KB |
| Tiger External Top Photo Inspiron 1010 | External Photos | 2009-05-15 | PDF 129.8 KB |
| External Photos | External Photos | 2009-04-07 | PDF 32.5 KB |
| External Photos | External Photos | 2009-03-03 | PDF 31.6 KB |
| External Photos | External Photos | 2009-02-05 | PDF 70 KB |
| Label | ID Label/Location Info | 2009-08-03 | PDF 442.6 KB |
| Qiao Atheros Label Inspiron 910 | ID Label/Location Info | 2009-05-15 | PDF 830.6 KB |
| Qiao Bluetooth Label Inspiron 910 | ID Label/Location Info | 2009-05-15 | PDF 826.4 KB |
| Qiao Broadcom Label Inspiron 910 | ID Label/Location Info | 2009-05-15 | PDF 824.6 KB |
| Qiao Label Location Inspiron 910 | ID Label/Location Info | 2009-05-15 | PDF 2.8 MB |
| Qiao WWAN Label Inspiron 910 | ID Label/Location Info | 2009-05-15 | PDF 724.3 KB |
| Tiger Label Inspiron 1010 | ID Label/Location Info | 2009-05-15 | PDF 815.1 KB |
| Tiger Label Location Inspiron 1010 | ID Label/Location Info | 2009-05-15 | PDF 1.9 MB |
| Tiger WLAN Label 2 Inspiron 1010 | ID Label/Location Info | 2009-05-15 | PDF 372.8 KB |
| Tiger WLAN Label Inspiron 1010 | ID Label/Location Info | 2009-05-15 | PDF 371.9 KB |
| Tiger WWAN Label Inspiron 1010 | ID Label/Location Info | 2009-05-15 | PDF 248.6 KB |
| Label and Location | ID Label/Location Info | 2009-04-07 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-04-06 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-04-06 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-03-06 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-03-05 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-03-03 | PDF 723.5 KB |
| Label and Location | ID Label/Location Info | 2009-03-03 | PDF 609.1 KB |
| Label and Location rev | ID Label/Location Info | 2009-02-27 | PDF 174 KB |
| FCC ID Label and Location | ID Label/Location Info | 2009-02-05 | PDF 125.9 KB |
| Report | Test Report | 2009-08-03 | PDF 323.9 KB |
| Test Report 1 | Test Report | 2009-04-07 | PDF 65.7 KB |
| Test Report 2 | Test Report | 2009-04-07 | PDF 66.8 KB |
| Test Report 3 | Test Report | 2009-04-07 | PDF 74.7 KB |
| Test Report 4 | Test Report | 2009-04-07 | PDF 90.7 KB |
| Test Report 5 | Test Report | 2009-04-07 | PDF 90.7 KB |
| Test Report 1 | Test Report | 2009-04-06 | PDF 74.2 KB |
| Test Report 1 | Test Report | 2009-04-06 | PDF 66.7 KB |
| Test Report 2 | Test Report | 2009-04-06 | PDF 90.6 KB |
| Test Report 2 | Test Report | 2009-04-06 | PDF 90.2 KB |
| Test Report 1 | Test Report | 2009-03-06 | PDF 65.6 KB |
| Test Report 2 | Test Report | 2009-03-06 | PDF 66.7 KB |
| Test Report 3 | Test Report | 2009-03-06 | PDF 90.6 KB |
| Test Report 1 | Test Report | 2009-03-05 | PDF 65.6 KB |
| Test Report 2 | Test Report | 2009-03-05 | PDF 66.7 KB |
| Test Report 3 | Test Report | 2009-03-05 | PDF 90.6 KB |
| Test Report 1 | Test Report | 2009-03-03 | PDF 65.6 KB |
| Test Report 1 | Test Report | 2009-03-03 | PDF 65.6 KB |
| Test Report 2 | Test Report | 2009-03-03 | PDF 66.7 KB |
| Test Report 2 | Test Report | 2009-03-03 | PDF 66.7 KB |
| Test Report 3 | Test Report | 2009-03-03 | PDF 66.1 KB |
| Test Report 3 | Test Report | 2009-03-03 | PDF 74.6 KB |
| Test Report 4 | Test Report | 2009-03-03 | PDF 90.5 KB |
| Test Report 5 | Test Report | 2009-03-03 | PDF 90.6 KB |
| Test Report 1 | Test Report | 2009-02-27 | PDF 65.6 KB |
| Test Report 2 | Test Report | 2009-02-27 | PDF 66.7 KB |
| Test Report 3 | Test Report | 2009-02-27 | PDF 74.5 KB |
| Test Report 4 | Test Report | 2009-02-27 | PDF 90.5 KB |
| Test Report 5 | Test Report | 2009-02-27 | PDF 90.6 KB |
| KDB Correspondence | Attestation Statements | 2009-05-15 | PDF 77.4 KB |
| Authorization Letter | Cover Letter(s) | 2009-09-01 | PDF 31.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-09-01 | PDF 13.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-09-01 | PDF 488 KB |
| Authorization Letter | Cover Letter(s) | 2009-08-03 | PDF 127.3 KB |
| C2PC Letter | Cover Letter(s) | 2009-08-03 | PDF 478.1 KB |
| Request for Confidentiality | Cover Letter(s) | 2009-08-03 | PDF 450.9 KB |
| TCB Q and A | Cover Letter(s) | 2009-08-03 | PDF 13.6 KB |
| C2PC Letter Inspiron 1010 | Cover Letter(s) | 2009-05-15 | PDF 64.1 KB |
| CONFIDENTIALITY CORRECTION OF TWO EXHIBITS | Cover Letter(s) | 2009-05-15 | PDF 42.3 KB |
| Colocation Cover Letter Inspiron 1010 | Cover Letter(s) | 2009-05-15 | PDF 37 KB |
| Confidentiality Request Inspiron 1010 | Cover Letter(s) | 2009-05-15 | PDF 57 KB |
| Filing Explaination Cover Letter - overall | Cover Letter(s) | 2009-05-15 | PDF 22.5 KB |
| Host Certification Letter Inspiron 1010 | Cover Letter(s) | 2009-05-15 | PDF 39.5 KB |
| Qiao C2PC Request for Inspiron 910 | Cover Letter(s) | 2009-05-15 | PDF 62 KB |
| Qiao Colocation Letter Inspiron 910 | Cover Letter(s) | 2009-05-15 | PDF 31.2 KB |
| Qiao Confidentiality Request Inspiron 910 | Cover Letter(s) | 2009-05-15 | PDF 55.5 KB |
| Qiao Host Certification Letter Inspiron 910 | Cover Letter(s) | 2009-05-15 | PDF 36.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-04-07 | PDF 57.1 KB |
| Cover Letter | Cover Letter(s) | 2009-04-07 | PDF 31.7 KB |
| Host letter | Cover Letter(s) | 2009-04-07 | PDF 32.8 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-04-07 | PDF 61 KB |
| Contact Letter | Cover Letter(s) | 2009-04-06 | PDF 31 KB |
| Host Letter | Cover Letter(s) | 2009-04-06 | PDF 33.7 KB |
| Host letter | Cover Letter(s) | 2009-04-06 | PDF 33.8 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-04-06 | PDF 142.8 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-04-06 | PDF 59.6 KB |
| Authorization Letter | Cover Letter(s) | 2009-03-06 | PDF 17.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-03-06 | PDF 56.8 KB |
| Contact Letter | Cover Letter(s) | 2009-03-06 | PDF 34.7 KB |
| Cover Letter | Cover Letter(s) | 2009-03-06 | PDF 38.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-03-06 | PDF 64.9 KB |
| Cover Letter | Cover Letter(s) | 2009-03-05 | PDF 35.5 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-03-05 | PDF 61.8 KB |
| Short Term Confidentialty Letter | Cover Letter(s) | 2009-03-05 | PDF 54.8 KB |
| Contact Letter | Cover Letter(s) | 2009-03-03 | PDF 37.1 KB |
| Cover Letter | Cover Letter(s) | 2009-03-03 | PDF 35.6 KB |
| Cover Letter | Cover Letter(s) | 2009-03-03 | PDF 37.1 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-03-03 | PDF 63.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-03-03 | PDF 62.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-02-27 | PDF 56.4 KB |
| Cover Letter | Cover Letter(s) | 2009-02-27 | PDF 34.4 KB |
| Host letter | Cover Letter(s) | 2009-02-27 | PDF 37.1 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-02-27 | PDF 62.6 KB |
| Cover Letter | Cover Letter(s) | 2009-02-05 | PDF 47.8 KB |
| RF Exposure MPE | RF Exposure Info | 2009-09-01 | PDF 108.4 KB |
| Antenna Specification | Parts List/Tune Up Info | 2009-08-03 | PDF 185.6 KB |
| SAR Report | RF Exposure Info | 2009-08-03 | PDF 657.9 KB |
| SAR attachment 1 | RF Exposure Info | 2009-08-03 | PDF 275.3 KB |
| SAR attachment 2 | RF Exposure Info | 2009-08-03 | PDF 677.3 KB |
| SAR attachment 3 | RF Exposure Info | 2009-08-03 | PDF 634.1 KB |
| SAR attachment 4 | RF Exposure Info | 2009-08-03 | PDF 621.3 KB |
| Qiao SAR Report Inspiron 910 | RF Exposure Info | 2009-05-15 | PDF 2.4 MB |
| Tiger SAR Inspiron 1010 | RF Exposure Info | 2009-05-15 | PDF 3.9 MB |
| Tiger SAR Report Part I Inspiron 1010 | RF Exposure Info | 2009-05-15 | PDF 3.9 MB |
| Tiger SAR Report Part II Inspiron 1010 | RF Exposure Info | 2009-05-15 | PDF 2 MB |
Application Information
| Application ID | Ud9k938a1+y+nt4pxOKGzw== |
|---|---|
| Final Action Date | 2009-09-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003757176 |
| Model | NVWE760D |
| Frequency Range | 824.7-848.31 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | PCI Express Mini Card |
| Responsible Party | Bill Babbitt, Manager - Regulatory Engineering, bbabbitt@nvtl.com  , 858-812-3400 |
| Technical Contact | Glen Moore, NTS Calgary, glen.moore@ntscorp.com  , 403-568-6605 |
| Test Firm | Nick Kobrosly, National Technical Systems, Inc., nick.kobrosly@ntscorp.com , 403-568-6605 |
| TCB Email | Hotline@atcb.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/01/2009 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W, Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in earlier filings. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Ud9k938a1+y+nt4pxOKGzw== | 2009-09-01 | Class II permissive change or modification of presently authorized equipment |
| 9DTFYS05Wooo8Vdzs8vhwA== | 2009-08-03 | Class II permissive change or modification of presently authorized equipment |
| KsjBWSTD0Eea2TaJ/ACQmA== | 2009-05-15 | Class II permissive change or modification of presently authorized equipment |
| 5BKKyCM5/SzN1b+E1ovQqQ== | 2009-04-07 | Class II permissive change or modification of presently authorized equipment |
| idpZ+mAkGuRuwVcn1x35TQ== | 2009-04-06 | Class II permissive change or modification of presently authorized equipment |
| e+2U0oLXqhyaGIkqI6J+9g== | 2009-04-06 | Class II permissive change or modification of presently authorized equipment |
| eh+gxLzzKczglAcrfDvABw== | 2009-03-06 | Class II permissive change or modification of presently authorized equipment |
| PStGofjTDhX/qXhMkZFeDw== | 2009-03-05 | Class II permissive change or modification of presently authorized equipment |
| VAL30fj+uy0dvabtvuIW5g== | 2009-03-03 | Class II permissive change or modification of presently authorized equipment |
| L1SWM/SWQRJ4qt4iEoroyw== | 2009-03-03 | Class II permissive change or modification of presently authorized equipment |
| G+jpi6onpomiPMarIbKyRQ== | 2009-02-27 | Class II permissive change or modification of presently authorized equipment |
| aMV4djD5MO+3X7F2QtbkwA== | 2009-02-05 | Change in identification of presently authorized equipment. Original FCC ID: PKRNVWE760 Grant Date: 01/09/2009 |
Equipment Authorization
Grants
TCB Grant - Application VAL30fj+uy0dvabtvuIW5g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/03/2009 Application Dated: 03/03/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application VAL30fj+uy0dvabtvuIW5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 03/03/2009 Application Dated: 03/03/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/01/2009 Application Dated: 09/01/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W, Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in earlier filings. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Ud9k938a1+y+nt4pxOKGzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 09/01/2009 Application Dated: 09/01/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W, Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in earlier filings. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/05/2009 Application Dated: 03/05/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application PStGofjTDhX/qXhMkZFeDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 03/05/2009 Application Dated: 03/05/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/03/2009 Application Dated: 03/03/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application L1SWM/SWQRJ4qt4iEoroyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 03/03/2009 Application Dated: 03/03/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 05/15/2009 Application Dated: 04/21/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filings under this FCCID is Part 22 ERP 0.546 W, Part 24 EIRP 0.355 W. Modular approval. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values, single- and co-transmitting with associated FCC IDs, for filings under this FCC ID are: Part 22 - 0.34 W/kg; Part 24 - 0.61 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/06/2009 Application Dated: 04/06/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application idpZ+mAkGuRuwVcn1x35TQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 04/06/2009 Application Dated: 04/06/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application G+jpi6onpomiPMarIbKyRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 02/27/2009 Application Dated: 02/27/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W.Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/06/2009 Application Dated: 03/05/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application eh+gxLzzKczglAcrfDvABw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 03/06/2009 Application Dated: 03/05/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/06/2009 Application Dated: 04/06/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application e+2U0oLXqhyaGIkqI6J+9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 04/06/2009 Application Dated: 04/06/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 |
Date of Grant: 02/05/2009 Application Dated: 02/05/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application aMV4djD5MO+3X7F2QtbkwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 02/05/2009 Application Dated: 02/05/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W , Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/03/2009 Application Dated: 08/03/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filings under this FCCID is Part 22 ERP 0.546 W, Part 24 EIRP 0.355 W. Modular approval. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values, single- and co-transmitting with associated FCC IDs, for filings under this FCC ID are: Part 22 - 0.34 W/kg; Part 24 - 0.61 W/kg. |
EAS Grant - Application 9DTFYS05Wooo8Vdzs8vhwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 08/03/2009 Application Dated: 08/03/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filings under this FCCID is Part 22 ERP 0.546 W, Part 24 EIRP 0.355 W. Modular approval. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values, single- and co-transmitting with associated FCC IDs, for filings under this FCC ID are: Part 22 - 0.34 W/kg; Part 24 - 0.61 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/07/2009 Application Dated: 04/07/2009 |
| Novatel Wireless Inc |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W, Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 5BKKyCM5/SzN1b+E1ovQqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless Inc 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 04/07/2009 Application Dated: 04/07/2009 |
| Attention: Bill Babbitt , Manager - Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWE760D |
| Name of Grantee: | Novatel Wireless Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.877 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.628 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.54576 W, Part 24 EIRP 0.35481 W. Modular approval. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |