FCC ID PKRNVWES720
Dual-Band CDMA / EvDO Module
by Inseego Corp.
Grantee Code: PKR Product Code: NVWES720
Latest application date: 2006-09-22
FCC ID Device Details
| FCC ID | PKRNVWES720 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PKR |
| Product Code | NVWES720 |
| Applicant Business | Inseego Corp. 🇺🇸 |
| Related Domains |  inseego.com |
| Equipment Class | Dual-Band CDMA / EvDO Module |
| Test Firm | PCTEST Engineering Laboratory, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2006-09-22 |
| 824.7-848.3 MHz | Original Equipment | 2006-08-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2006-08-07 | PDF 493.4 KB |
| INTERNAL PHOTOS 1 OF 2 | Internal Photos | 2006-08-07 | PDF 822.5 KB |
| INTERNAL PHOTOS 2 OF 2 | Internal Photos | 2006-08-07 | PDF 539.1 KB |
| EXTERNAL PHOTOS 1 OF 2 | External Photos | 2006-08-07 | PDF 822.5 KB |
| EXTERNAL PHOTOS 2 OF 2 | External Photos | 2006-08-07 | PDF 539.1 KB |
| LABEL | ID Label/Location Info | 2006-08-07 | PDF 985 KB |
| LABEL LOCATION | ID Label/Location Info | 2006-08-07 | PDF 1.3 MB |
| Test Setup Photos | Test Setup Photos | 2006-09-22 | PDF 831 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2006-08-07 | PDF 63.9 KB |
| Test Report | Test Report | 2006-09-22 | PDF 433.4 KB |
| TEST REPORT | Test Report | 2006-08-07 | PDF 1.1 MB |
| Cover Letter | Cover Letter(s) | 2006-09-22 | PDF 9.1 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2006-08-07 | PDF 12 KB |
| MPE REPORT | RF Exposure Info | 2006-08-07 | PDF 138.7 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 30.5 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 639 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 55.4 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 53.7 KB | |
| TUNE UP PROCEDURE Metadata only | Parts List/Tune Up Info | PDF 58.6 KB |
Application Information
| Application ID | VWDtNYnFLE4wo3J6gawkbg== |
|---|---|
| Final Action Date | 2006-09-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003757176 |
| Model | NVWES720 |
| Frequency Range | 824.7-848.31 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Dual-Band CDMA / EvDO Module |
| Responsible Party | Roman Olmos, Staff Regulatory Engineer, Roman.Olmos@inseego.com , 858-812-3400 |
| Agent | Randy Randy Randy, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com  , 410-290-6652 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com , 410-290-6652 |
| Test Firm | Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com , 4102906652 |
| TCB Email | randy@pctestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The maximum antenna gain is 3dBi. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VWDtNYnFLE4wo3J6gawkbg== | 2006-09-22 | Class II permissive change or modification of presently authorized equipment |
| f4IpgyT7i/CImW0NCZ9ipw== | 2006-08-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VWDtNYnFLE4wo3J6gawkbg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 09/22/2006 Application Dated: 09/22/2006 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWES720 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA / EvDO Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.295 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.282 | 2.5 PM | 1M28F9W |
| Class II Permissive Change. Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The maximum antenna gain is 3dBi. |
EAS Grant - Application VWDtNYnFLE4wo3J6gawkbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inseego Corp. 9710 Scranton Road Suite 200 San Diego, CA 92121 United States |
Date of Grant: 09/22/2006 Application Dated: 09/22/2006 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWES720 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA / EvDO Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.295 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.282 | 2.5 PM | 1M28F9W |
| Class II Permissive Change. Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The maximum antenna gain is 3dBi. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/07/2006 Application Dated: 08/07/2006 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWES720 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA CELL-PCS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.295 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.282 | 2.5 PM | 1M28F9W |
| Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This filing is only applicable for 1900 MHz PCS and 850MHz Cellular operations. |
EAS Grant - Application f4IpgyT7i/CImW0NCZ9ipw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inseego Corp. 9710 Scranton Road Suite 200 San Diego, CA 92121 United States |
Date of Grant: 08/07/2006 Application Dated: 08/07/2006 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWES720 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA CELL-PCS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.295 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.282 | 2.5 PM | 1M28F9W |
| Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This filing is only applicable for 1900 MHz PCS and 850MHz Cellular operations. |
| Mail To: |