FCC ID PKTPEMAAU1

PCI Express Mini OEM Module

by General Dynamics Broadband, Inc.

Grantee Code: PKT   Product Code: PEMAAU1
Latest application date: 2012-04-30

FCC ID Device Details

FCC IDPKTPEMAAU1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePKT
Product CodePEMAAU1
Applicant BusinessGeneral Dynamics Broadband, Inc. 🇺🇸
Related Domains ipwireless.com
Equipment ClassPCI Express Mini OEM Module
Test FirmCompliance Certification Services (UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2496-2690 MHzClass II permissive change or modification of presently authorized equipment2012-04-30
2496-2690 MHzOriginal Equipment2009-09-04

Exhibits

DocumentTypeAvailableFile
Integration GuideUsers Manual2009-09-04PDF 166.3 KB
Internal PhotosInternal Photos2009-09-04PDF 631.4 KB
External PhotosExternal Photos2009-09-04PDF 546.7 KB
ID LabelID Label/Location Info2012-04-30PDF 132.5 KB
Label DetailID Label/Location Info2009-09-04PDF 128.1 KB
Label Position OnlyID Label/Location Info2009-09-04PDF 105.3 KB
Test Report Data Rate 3pt84Test Report2009-09-04PDF 1.4 MB
Test Report Data Rate 7pt68Test Report2009-09-04PDF 1.4 MB
Authorization letterCover Letter(s)2012-04-30PDF 227.2 KB
C2PC letterCover Letter(s)2012-04-30PDF 97.1 KB
Confidentiality letterCover Letter(s)2012-04-30PDF 105.5 KB
Agency FormCover Letter(s)2009-09-04PDF 78 KB
Confidentiality RequestCover Letter(s)2009-09-04PDF 95.9 KB
Modular Approval LetterCover Letter(s)2009-09-04PDF 156.4 KB
RF Exposure InfoRF Exposure Info2012-04-30PDF 429.3 KB
MPE ClaculationRF Exposure Info2009-09-04PDF 193.9 KB
Source Based Averaging ConfirmationRF Exposure Info2009-09-04PDF 524.8 KB
Tune Up DeclarationParts List/Tune Up Info2009-09-04PDF 29.4 KB

Application Information

Application IDRGIO2QfXZDwkWBKmof61sw==
Final Action Date2012-04-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005883095
ModelPEMAAU1
Frequency Range2496-2690 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionPCI Express Mini OEM Module
Responsible PartyJoseph Cheung, jcheung@ipwireless.com , 408-839-1887
Test FirmBarbara Judge, Compliance Certification Services (UL CCS), barbara.judge@ccsemc.com , 510-771-1104
TCB Emailcertnotice@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to add collocation with WLAN modules in Lenovo laptops under mobile rf exposure conditions as documented in this filing. Single Modular Approval. Power output is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antennas used for this transmitter must not exceed 9 dBi gain.

Applications

Application IDDatePurpose
RGIO2QfXZDwkWBKmof61sw==2012-04-30Class II permissive change or modification of presently authorized equipment
k6HeoTWFiaMkylaVlOXFew==2009-09-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
2496-2690 MHz0.251ppm8M40G7W27
2496-2690 MHz0.251ppm8M40D7W27
2496-2690 MHz0.251ppm4M20G7W27
2496-2690 MHz0.251ppm4M20D7W27

Grants

TCB Grant - Application RGIO2QfXZDwkWBKmof61sw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/30/2012

Application Dated: 04/30/2012
General Dynamics Broadband, Inc.
90 New Montgomery Street
Suite 315
San Francisco, CA 94105
 
Attention: Joseph Cheung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKTPEMAAU1
Name of Grantee:  General Dynamics Broadband, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: PCI Express Mini OEM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2496.0  -  2690.0 0.25 1.0  PM 8M40G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20D7W
27 2496.0  -  2690.0 0.25 1.0  PM 8M40D7W

Class II permissive change to add collocation with WLAN modules in Lenovo laptops under mobile rf exposure conditions as documented in this filing. Single Modular Approval. Power output is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antennas used for this transmitter must not exceed 9 dBi gain.

EAS Grant - Application RGIO2QfXZDwkWBKmof61sw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Broadband, Inc.
90 New Montgomery Street Suite 315
San Francisco, CA 94105
United States
  Date of Grant: 04/30/2012

Application Dated: 04/30/2012
 
Attention: Joseph Cheung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKTPEMAAU1
Name of Grantee:  General Dynamics Broadband, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: PCI Express Mini OEM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2496.0  -  2690.0 0.25 1.0  PM 8M40G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20D7W
27 2496.0  -  2690.0 0.25 1.0  PM 8M40D7W

Class II permissive change to add collocation with WLAN modules in Lenovo laptops under mobile rf exposure conditions as documented in this filing. Single Modular Approval. Power output is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antennas used for this transmitter must not exceed 9 dBi gain.



TCB Grant - Application k6HeoTWFiaMkylaVlOXFew==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL VS Ltd
Offices 18-26, Grove House, Lutyens Close, Chineham Court,
Basingstoke, RG24 8AG
United Kingdom
Date of Grant: 09/04/2009

Application Dated: 09/03/2009
General Dynamics Broadband, Inc.
90 New Montgomery Street
Suite 315
San Francisco, CA 94105
 
Attention: Joseph Cheung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKTPEMAAU1
Name of Grantee:  General Dynamics Broadband, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: PCI Express Mini OEM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2496.0  -  2690.0 0.25 1.0  PM 8M40G7W
27 2496.0  -  2690.0 0.25 1.0  PM 8M40D7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20D7W

Single Modular Approval. Power output is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antennas used for this transmitter must not exceed 9 dBi gain.

EAS Grant - Application k6HeoTWFiaMkylaVlOXFew==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Broadband, Inc.
90 New Montgomery Street Suite 315
San Francisco, CA 94105
United States
  Date of Grant: 09/04/2009

Application Dated: 09/03/2009
 
Attention: Joseph Cheung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKTPEMAAU1
Name of Grantee:  General Dynamics Broadband, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: PCI Express Mini OEM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2496.0  -  2690.0 0.25 1.0  PM 8M40G7W
27 2496.0  -  2690.0 0.25 1.0  PM 8M40D7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20G7W
27 2496.0  -  2690.0 0.25 1.0  PM 4M20D7W

Single Modular Approval. Power output is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antennas used for this transmitter must not exceed 9 dBi gain.



Mail To: