FCC ID PKW-WAP54A

54Mbps Wireless Access Point

by Cisco-Linksys, LLC

Grantee Code: PKW   Product Code: WAP54A
Latest application date: 2002-04-17

FCC ID Device Details

FCC IDPKW-WAP54A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePKW
Product CodeWAP54A
Applicant BusinessCisco-Linksys, LLC 🇺🇸
Related Domains linksys.com
Equipment Class54Mbps Wireless Access Point
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzOriginal Equipment2002-04-17

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2002-04-17PDF 355.6 KB
Internal PhotosInternal Photos2002-04-17PDF 701.1 KB
External PhotosExternal Photos2002-04-17PDF 463.5 KB
LocationID Label/Location Info2002-04-17PDF 68.9 KB
SampleID Label/Location Info2002-04-17PDF 71.1 KB
Operational DescriptionOperational Description2002-04-17PDF 51.8 KB
Test Setup PhotosTest Setup Photos2002-04-17PDF 209.7 KB
Test Report Part 1Test Report2002-04-17PDF 2 MB
Test Report Part 2Test Report2002-04-17PDF 1.7 MB
Test Report Part 3Test Report2002-04-17PDF 1.7 MB
Test Report Part 4Test Report2002-04-17PDF 1.1 MB
Confid RequestCover Letter(s)2002-04-17PDF 14.9 KB
POACover Letter(s)2002-04-17PDF 26.8 KB
RF Exposure InfoRF Exposure Info2002-04-17PDF 102.6 KB
Block Metadata onlyBlock DiagramPDF 74.5 KB
Schema 1 Metadata onlySchematicsPDF 349.4 KB
Schema 2 Metadata onlySchematicsPDF 323.1 KB
Schema 3 Metadata onlySchematicsPDF 310.2 KB

Application Information

Application IDb5nWLOomcI5Ec6pzEaKijQ==
Final Action Date2002-04-17
Application PurposeOriginal Equipment
Applicant FRN0006267462
ModelWAP54A
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description54Mbps Wireless Access Point
Responsible PartyMs Jennifer Yu, Associate Engineer, jennifer.yu@linksys.com , 949-784-1847
AgentAlan Alan Alan, Advance Data Technology Corporataion, alan_lane@mail.adt.com.tw , +886 3 327 0910
Technical ContactAlan Lane, Advance Data Technology Corporation, alan_lane@mail.adt.com.tw , +886 3 327 0910
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
b5nWLOomcI5Ec6pzEaKijQ==2002-04-17Original Equipment

Equipment Authorization

FrequencyOutputRules
5180-5320 MHz0.030300015E

Grants

TCB Grant - Application b5nWLOomcI5Ec6pzEaKijQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/17/2002

Application Dated: 04/16/2002
Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WAP54A
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 54Mbps Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5320.0 0.0303  

Power Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application b5nWLOomcI5Ec6pzEaKijQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
United States
  Date of Grant: 04/17/2002

Application Dated: 04/16/2002
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WAP54A
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 54Mbps Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5320.0 0.0303  

Power Output listed is Conducted. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: