FCC ID PKW-WPC51AB

802.11 a/b/g Wireless LAN Cardbus Card

by Cisco-Linksys, LLC

Grantee Code: PKW   Product Code: WPC51AB
Latest application date: 2003-01-15

FCC ID Device Details

FCC IDPKW-WPC51AB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePKW
Product CodeWPC51AB
Applicant BusinessCisco-Linksys, LLC 🇺🇸
Related Domains linksys.com
Equipment Class802.11 a/b/g Wireless LAN Cardbus Card
Test FirmCompliance Certification Services Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-AR5BCB-00022 Grant Date: 09/11/20022003-01-15
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-AR5BCB-00022 Grant Date: 09/11/20022003-01-15
5180-5240 MHzOriginal Equipment2002-11-27
2412-2462 MHzOriginal Equipment2002-11-27

Exhibits

DocumentTypeAvailableFile
Manual Metadata onlyUsers ManualPDF 620.1 KB
Manual Metadata onlyUsers ManualPDF 615.4 KB
Int Pics Metadata onlyInternal PhotosPDF 1.8 MB
External PhotosExternal Photos2003-01-15PDF 95.1 KB
Ext Pics Metadata onlyExternal PhotosPDF 1 MB
FCC ID label format and locationID Label/Location Info2003-01-15PDF 143 KB
Location Metadata onlyID Label/Location InfoPDF 161.9 KB
Sample Metadata onlyID Label/Location InfoPDF 85.3 KB
OP Descript Metadata onlyOperational DescriptionPDF 55 KB
Op Descript Metadata onlyOperational DescriptionPDF 55 KB
Test Setup Photos Metadata onlyTest Setup PhotosPDF 324.1 KB
Test Setup Pics Metadata onlyTest Setup PhotosPDF 324.1 KB
Part 1 Metadata onlyTest ReportPDF 2.9 MB
Part 2 Metadata onlyTest ReportPDF 2 MB
Part 3 Metadata onlyTest ReportPDF 2.3 MB
Applicant Request LetterCover Letter(s)2003-01-15PDF 62.8 KB
Applicant request letterCover Letter(s)2003-01-15PDF 62.8 KB
Authorization LetterCover Letter(s)2003-01-15PDF 605.9 KB
Authorization letterCover Letter(s)2003-01-15PDF 605.9 KB
ConfidCover Letter(s)PDF 51.7 KB
DofCCover Letter(s)PDF 62.8 KB
POACover Letter(s)PDF 48.1 KB
RF Exposure Info Metadata onlyRF Exposure InfoPDF 116.2 KB
Block Metadata onlyBlock DiagramPDF 8.8 KB
Schema Metadata onlySchematicsPDF 616.9 KB

Application Information

Application IDHnO1vnIyqSsShvZTnZJZtg==
Final Action Date2003-01-15
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: PPD-AR5BCB-00022 Grant Date: 09/11/2002
Applicant FRN0006267462
ModelWPC51AB
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 a/b/g Wireless LAN Cardbus Card
Responsible PartyMs Jennifer Yu, Associate Engineer, jennifer.yu@linksys.com , 949-784-1847
AgentSteve Steve Steve, Compliance Certification Services, scheng@ccsemc.com , 408-463-0885
Test FirmSteve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885
TCB Emailmkuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted and varies depending on mode and channel as indicated in the filing. This device must be marketed for indoor use only. Device is approved for notebook computer use with substantially similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance and indoor-only use. The highest reported SAR value is 0.425 W/kg.

Applications

Application IDDatePurpose
HnO1vnIyqSsShvZTnZJZtg==2003-01-15Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BCB-00022 Grant Date: 09/11/2002
8nZZntyNrOiQ1QOxGykP3A==2003-01-15Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BCB-00022 Grant Date: 09/11/2002
uH+dGDzkENCDV/0FPA931w==2002-11-27Original Equipment
CtiCBhmITt6aE10h3rBoIg==2002-11-27Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.018000015C
2412-2462 MHz0.09515C
5180-5320 MHz0.090000015E
5180-5240 MHz0.008915E
5260-5320 MHz0.009315E
5745-5825 MHz0.13615C

Grants

TCB Grant - Application uH+dGDzkENCDV/0FPA931w==

This application does not exist.

EAS Grant - Application uH+dGDzkENCDV/0FPA931w==

This application currently is not in final status.

TCB Grant - Application HnO1vnIyqSsShvZTnZJZtg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/15/2003

Application Dated: 01/15/2003
Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WPC51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless LAN Cardbus Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.095  
15C 5745.0  -  5825.0 0.136  

Output power is conducted and varies depending on mode and channel as indicated in the filing. This device must be marketed for indoor use only. Device is approved for notebook computer use with substantially similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance and indoor-only use. The highest reported SAR value is 0.425 W/kg.

EAS Grant - Application HnO1vnIyqSsShvZTnZJZtg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
United States
  Date of Grant: 01/15/2003

Application Dated: 01/15/2003
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WPC51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless LAN Cardbus Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.095  
15C 5745.0  -  5825.0 0.136  

Output power is conducted and varies depending on mode and channel as indicated in the filing. This device must be marketed for indoor use only. Device is approved for notebook computer use with substantially similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance and indoor-only use. The highest reported SAR value is 0.425 W/kg.



TCB Grant - Application CtiCBhmITt6aE10h3rBoIg==

This application does not exist.

EAS Grant - Application CtiCBhmITt6aE10h3rBoIg==

This application currently is not in final status.

TCB Grant - Application 8nZZntyNrOiQ1QOxGykP3A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/15/2003

Application Dated: 01/15/2003
Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WPC51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless LAN Cardbus Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5320.0 0.09  

Output power is conducted and varies depending on mode and channel as indicated in the filing. This device must be marketed for indoor use only. Device is approved for notebook computer use with substantially similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance and indoor-only use. The highest reported SAR value is 0.425 W/kg.

EAS Grant - Application 8nZZntyNrOiQ1QOxGykP3A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
United States
  Date of Grant: 01/15/2003

Application Dated: 01/15/2003
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WPC51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless LAN Cardbus Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5320.0 0.09  

Output power is conducted and varies depending on mode and channel as indicated in the filing. This device must be marketed for indoor use only. Device is approved for notebook computer use with substantially similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. End-users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance and indoor-only use. The highest reported SAR value is 0.425 W/kg.



Mail To: