FCC ID PKW-WMP51AB

Dual-Band Wireless A+B PCI Adapter

by Cisco-Linksys, LLC

Grantee Code: PKW   Product Code: WMP51AB
Latest application date: 2002-12-04

FCC ID Device Details

FCC IDPKW-WMP51AB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePKW
Product CodeWMP51AB
Applicant BusinessCisco-Linksys, LLC 🇺🇸
Related Domains linksys.com
Equipment ClassDual-Band Wireless A+B PCI Adapter
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5150-5250 MHzOriginal Equipment2002-12-04
2412-2462 MHzOriginal Equipment2002-12-04

Exhibits

DocumentTypeAvailableFile
Revised ManualUsers Manual2002-12-04PDF 1.1 MB
Internal PhotosInternal Photos2002-12-04PDF 2.3 MB
Internal PicsInternal Photos2002-12-04PDF 2.3 MB
External PhotosExternal Photos2002-12-04PDF 1.3 MB
External PicsExternal Photos2002-12-04PDF 1.3 MB
Label and LocationID Label/Location Info2002-12-04PDF 167.8 KB
SchemaSchematics2002-12-04PDF 154.4 KB
Operational DescriptionOperational Description2002-12-04PDF 5.8 KB
Test Setup PhotosTest Setup Photos2002-12-04PDF 49.3 KB
Test ReportTest Report2002-12-04PDF 2.5 MB
Confid RequestCover Letter(s)2002-12-04PDF 52 KB
DofCCover Letter(s)2002-12-04PDF 59.2 KB
POACover Letter(s)2002-12-04PDF 47.9 KB
RF Exposure InfoRF Exposure Info2002-12-04PDF 23.2 KB
Block Metadata onlyBlock DiagramPDF 9.2 KB

Application Information

Application IDfgeGR5uelBs7tzN2LBKOaA==
Final Action Date2002-12-04
Application PurposeOriginal Equipment
Applicant FRN0006267462
ModelWMP51AB
Frequency Range5150-5250 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDual-Band Wireless A+B PCI Adapter
Responsible PartyMs Jennifer Yu, Associate Engineer, jennifer.yu@linksys.com , 949-784-1847
Technical ContactAlan Lane, Advance Data Technology Corporation, vivi@adt.com.tw , +886 3 327 0910
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fgeGR5uelBs7tzN2LBKOaA==2002-12-04Original Equipment
V7KDbcgLiNnfekoY1zDSxg==2002-12-04Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.034000015C
5150-5250 MHz0.04615E
5250-5350 MHz0.04215E

Grants

TCB Grant - Application V7KDbcgLiNnfekoY1zDSxg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/04/2002

Application Dated: 12/04/2002
Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WMP51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Digital Transmission System
Notes: Dual-Band Wireless A+B PCI Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.034  

Power Potput listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application V7KDbcgLiNnfekoY1zDSxg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
United States
  Date of Grant: 12/04/2002

Application Dated: 12/04/2002
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WMP51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Digital Transmission System
Notes: Dual-Band Wireless A+B PCI Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.034  

Power Potput listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application fgeGR5uelBs7tzN2LBKOaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/04/2002

Application Dated: 12/04/2002
Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WMP51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual-Band Wireless A+B PCI Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5150.0  -  5250.0 0.046  
15E 5250.0  -  5350.0 0.042  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application fgeGR5uelBs7tzN2LBKOaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco-Linksys, LLC
17401 Armstrong Ave.
Irvine, CA 92614
United States
  Date of Grant: 12/04/2002

Application Dated: 12/04/2002
 
Attention: Ms Jennifer Yu , Associate Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PKW-WMP51AB
Name of Grantee:  Cisco-Linksys, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual-Band Wireless A+B PCI Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5150.0  -  5250.0 0.046  
15E 5250.0  -  5350.0 0.042  

Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: