1. FCC ID
  2. PL6
  3. PL6-2300-BTS3-R1

FCC ID PL6-2300-BTS3-R1

Base Station Transceiver

by Cisco Systems, Inc

Grantee Code: PL6   Product Code: 2300BTS3R1
Latest application date: 2006-12-18

FCC ID Device Details

FCC IDPL6-2300-BTS3-R1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePL6
Product Code2300BTS3R1
Applicant BusinessCisco Systems, Inc 🇺🇸
Related Domains cisco.com ntscorp.com
Equipment ClassBase Station Transceiver
Test FirmNational Technical Systems (NTS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2305-2320 MHzClass II permissive change or modification of presently authorized equipment2006-12-18
2305-2320 MHzOriginal Equipment2006-09-26

Exhibits

DocumentTypeAvailableFile
Internal photos 1Internal Photos2006-12-18PDF 1.7 MB
Internal photos 2Internal Photos2006-12-18PDF 1.5 MB
Blue BoardInternal Photos2006-09-26PDF 3.1 MB
Cards upside downInternal Photos2006-09-26PDF 155.5 KB
Finished openInternal Photos2006-09-26PDF 232.4 KB
Closed backExternal Photos2006-09-26PDF 712.3 KB
FrontExternal Photos2006-09-26PDF 154.7 KB
LabelID Label/Location Info2006-09-26PDF 96.5 KB
Picture 1Test Setup Photos2006-09-26PDF 592.5 KB
Picture 2Test Setup Photos2006-09-26PDF 633.5 KB
Test reportTest Report2006-12-18PDF 1.5 MB
Test reportTest Report2006-09-26PDF 2.4 MB
Authority letterCover Letter(s)2006-12-18PDF 163.7 KB
Letter of changesCover Letter(s)2006-12-18PDF 17.5 KB
Authority letterCover Letter(s)2006-09-26PDF 132.4 KB
Confidentiality letterCover Letter(s)2006-09-26PDF 136.6 KB
Tune upParts List/Tune Up Info2006-09-26PDF 12.3 KB
Part 1A Metadata onlyUsers ManualPDF 293.8 KB
Part 1B Metadata onlyUsers ManualPDF 2 MB
Part 2 Metadata onlyUsers ManualPDF 448 KB
Part 3 Metadata onlyUsers ManualPDF 2.1 MB
Part 4 Metadata onlyUsers ManualPDF 579 KB
Part 5A Metadata onlyUsers ManualPDF 999.4 KB
Part 5B Metadata onlyUsers ManualPDF 997.2 KB
Part 6 Metadata onlyUsers ManualPDF 1.7 MB
Part 7 Metadata onlyUsers ManualPDF 2.4 MB
Part 8 Metadata onlyUsers ManualPDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 58 KB
Schematics 1 Metadata onlySchematicsPDF 1.6 MB
Schematics 2 Metadata onlySchematicsPDF 1.9 MB
Technical description Metadata onlyOperational DescriptionPDF 160.3 KB

Application Information

Application IDsfMqPX1MAh+91miBYIUjbQ==
Final Action Date2006-12-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018679845
Model2300-BTS3-R1
Frequency Range2305-2320 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBase Station Transceiver
Responsible PartyGerard Thorpe, Manager , EMC Standards and Operations, gthorpe@cisco.com , 408-527-7907
AgentTom Tom Tom, National Technical Systems Corp., Tom.tidwell@ntscorp.com , 972-509-2566
Technical ContactTom Tidwell, National Technical Systems Corp., Tom.tidwell@ntscorp.com , 972-509-2566
Non-Technical ContactTom Tidwell, National Technical Systems Corp., Tom.tidwell@ntscorp.com , 972-509-2566
Test FirmKimberly Zavala, National Technical Systems (NTS), kimberly.zavala@nts.com , 972-509-2566
TCB Emailjoanna.olszanowska@nemko.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted at each antenna. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Applications

Application IDDatePurpose
sfMqPX1MAh+91miBYIUjbQ==2006-12-18Class II permissive change or modification of presently authorized equipment
jcXLKTYbNUG82AaJhHcv8w==2006-09-26Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
2305-2320 MHz201ppm5M00W7D27
2305-2320 MHz201ppm5M00F9W27
2345-2360 MHz201ppm5M00W7D27
2345-2360 MHz201ppm5M00F9W27

Grants

TCB Grant - Application sfMqPX1MAh+91miBYIUjbQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 12/18/2006

Application Dated: 12/18/2006
Cisco Systems, Inc
125 W Tasman
San Jose, CA 95134
 
Attention: Gerard Thorpe , Manager , EMC Standards and Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PL6-2300-BTS3-R1
Name of Grantee:  Cisco Systems, Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 2305.0  -  2320.0 20.0 1.0  PM 5M00W7D
27 2345.0  -  2360.0 20.0 1.0  PM 5M00W7D
27 2305.0  -  2320.0 20.0 1.0  PM 5M00F9W
27 2345.0  -  2360.0 20.0 1.0  PM 5M00F9W

Output power is conducted at each antenna. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

EAS Grant - Application sfMqPX1MAh+91miBYIUjbQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems, Inc
125 W Tasman
San Jose, CA 95134
United States 		  Date of Grant: 12/18/2006

Application Dated: 12/18/2006
 
Attention: Gerard Thorpe , Manager , EMC Standards and Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PL6-2300-BTS3-R1
Name of Grantee:  Cisco Systems, Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 2305.0  -  2320.0 20.0 1.0  PM 5M00W7D
27 2345.0  -  2360.0 20.0 1.0  PM 5M00W7D
27 2305.0  -  2320.0 20.0 1.0  PM 5M00F9W
27 2345.0  -  2360.0 20.0 1.0  PM 5M00F9W

Output power is conducted at each antenna. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



TCB Grant - Application jcXLKTYbNUG82AaJhHcv8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/26/2006

Application Dated: 09/26/2006
Cisco Systems, Inc
125 W Tasman
San Jose, CA 95134
 
Attention: Gerard Thorpe , Manager , EMC Standards and Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PL6-2300-BTS3-R1
Name of Grantee:  Cisco Systems, Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 2305.0  -  2320.0 20.0 1.0  PM 5M00W7D
27 2345.0  -  2360.0 20.0 1.0  PM 5M00W7D
27 2305.0  -  2320.0 20.0 1.0  PM 5M00F9W
27 2345.0  -  2360.0 20.0 1.0  PM 5M00F9W

Output power is conducted at each antenna. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

EAS Grant - Application jcXLKTYbNUG82AaJhHcv8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems, Inc
125 W Tasman
San Jose, CA 95134
United States 		  Date of Grant: 09/26/2006

Application Dated: 09/26/2006
 
Attention: Gerard Thorpe , Manager , EMC Standards and Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PL6-2300-BTS3-R1
Name of Grantee:  Cisco Systems, Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 2305.0  -  2320.0 20.0 1.0  PM 5M00W7D
27 2345.0  -  2360.0 20.0 1.0  PM 5M00W7D
27 2305.0  -  2320.0 20.0 1.0  PM 5M00F9W
27 2345.0  -  2360.0 20.0 1.0  PM 5M00F9W

Output power is conducted at each antenna. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To: