FCC ID PM7-IRL2001

Modular integrated reader/lock

by Recognition Source, LLC

Grantee Code: PM7   Product Code: IRL2001
Latest application date: 2004-01-12

FCC ID Device Details

FCC IDPM7-IRL2001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePM7
Product CodeIRL2001
Applicant BusinessRecognition Source, LLC 🇺🇸
Related Domains recognition-source.com radiomet.com
Equipment ClassModular integrated reader/lock
Test FirmRadiometrics Midwest Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902-928 MHzClass II permissive change or modification of presently authorized equipment2004-01-12
902-928 MHzClass II permissive change or modification of presently authorized equipment2003-10-20
902-928 MHzOriginal Equipment2001-07-01

Exhibits

DocumentTypeAvailableFile
Operational ManualUsers Manual2004-01-12PDF 973.2 KB
WISI manualUsers Manual2004-01-12PDF 2.3 MB
WPR manualUsers Manual2004-01-12PDF 887.5 KB
Users manualUsers Manual2003-10-20PDF 1.9 MB
ManualUsers Manual2001-07-01PDF 477.7 KB
Internal photos of EUTInternal Photos2004-01-12PDF 485.5 KB
Int photos of EUTInternal Photos2003-10-20PDF 452.5 KB
Internal photosInternal Photos2001-07-01PDF 776.1 KB
Ext photos of EUTExternal Photos2004-01-12PDF 93 KB
Ext Photos os EUTExternal Photos2003-10-20PDF 146.5 KB
External photosExternal Photos2001-07-01PDF 402.7 KB
ID Drawing and LocationID Label/Location Info2004-01-12PDF 206.5 KB
ID Label and locationID Label/Location Info2003-10-20PDF 805.5 KB
Label detailsID Label/Location Info2001-07-01PDF 287.9 KB
Block diagramBlock Diagram2001-07-01PDF 27.7 KB
Operational descriptionOperational Description2001-07-01PDF 6 KB
Photos of EUT setupTest Setup Photos2004-01-12PDF 474.5 KB
Photographs of test setupTest Setup Photos2003-10-20PDF 590.5 KB
Test setup photosTest Setup Photos2001-07-01PDF 297.6 KB
Measurement reportTest Report2004-01-12PDF 566 KB
EUT test reportTest Report2003-10-20PDF 497.5 KB
Test reportTest Report2001-07-01PDF 912 KB
Confidentiality letterCover Letter(s)2004-01-12PDF 167.8 KB
Letter of AuthorizationCover Letter(s)2004-01-12PDF 205.7 KB
Overview letterCover Letter(s)2004-01-12PDF 51.6 KB
Rev 3 confidential request letterCover Letter(s)2004-01-12PDF 102.2 KB
Revised Confidentiality LetterCover Letter(s)2004-01-12PDF 102.9 KB
Authorization LetterCover Letter(s)2003-10-20PDF 446.8 KB
Confidentiality requestCover Letter(s)2003-10-20PDF 392.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 549.8 KB
Block Diagram of EUT Metadata onlyBlock DiagramPDF 549.8 KB
Schematic Metadata onlySchematicsPDF 245.2 KB
Schematic Diagram Metadata onlySchematicsPDF 165.6 KB
Schematic diagram Metadata onlySchematicsPDF 165.6 KB
Description of EUT Metadata onlyOperational DescriptionPDF 48 KB
EUT Description Metadata onlyOperational DescriptionPDF 44.3 KB
EUT Parts list Metadata onlyParts List/Tune Up InfoPDF 22.1 KB
List of parts Metadata onlyParts List/Tune Up InfoPDF 20.4 KB

Application Information

Application IDSO0kovE1xNFtBpbjA13RGw==
Final Action Date2004-01-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018919456
ModelIRL2001
Frequency Range902-928 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionModular integrated reader/lock
Responsible PartyGerard Seyler, Vice President of Engineering, gseyler@recognition-source.com , 630-762-4461
AgentJoseph Joseph Joseph, Radiometrics Midwest Corporation, joe@radiomet.com , 815-293-0772
Technical ContactJoseph R Strzelecki, Radiometrics Midwest Corporation, joe@radiomet.com , 815-293-0772
Non-Technical ContactJoan E Strzelecki, Radiometrics Midwest Corporation, joan@radiomet.com , 815-293-0772
Test FirmJoseph Strzelecki, Radiometrics Midwest Corporation, 815-293-0772
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsGrant Conditions - The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
SO0kovE1xNFtBpbjA13RGw==2004-01-12Class II permissive change or modification of presently authorized equipment
6gu2qOD0SK/bXQmGHIAm1Q==2003-10-20Class II permissive change or modification of presently authorized equipment
MY/25VpsuN/RYUyKc2P3qg==2001-07-01Original Equipment

Equipment Authorization

FrequencyOutputRules
902-928 MHz0.200000015C

Grants

TCB Grant - Application SO0kovE1xNFtBpbjA13RGw==

This application does not exist.

EAS Grant - Application SO0kovE1xNFtBpbjA13RGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 01/12/2004

Application Dated: 12/11/2003
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-IRL2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Modular integrated reader/lock
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.2  

Grant Conditions - The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application MY/25VpsuN/RYUyKc2P3qg==

Mail To:
James Wiemeyer,
RF Ideas, Inc.
3820 Stern Av.
St. Charles, IL 60174
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/01/2001

Application Dated: 07/01/2001
Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-IRL2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access System Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.2  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application MY/25VpsuN/RYUyKc2P3qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 07/01/2001

Application Dated: 07/01/2001
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-IRL2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access System Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.2  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 6gu2qOD0SK/bXQmGHIAm1Q==

This application does not exist.

EAS Grant - Application 6gu2qOD0SK/bXQmGHIAm1Q==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 10/20/2003

Application Dated: 09/11/2003
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-IRL2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Modular integrated reader/lock
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.2  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:
James Wiemeyer, Engineering Manager
Recognition Source, LLC
3820 Stern Av.
St. Charles, IL 60174