FCC ID PM7DCMI2001

Access System Transmitter

by Recognition Source, LLC

Grantee Code: PM7   Product Code: DCMI2001
Latest application date: 2005-03-25

FCC ID Device Details

FCC IDPM7DCMI2001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePM7
Product CodeDCMI2001
Applicant BusinessRecognition Source, LLC 🇺🇸
Related Domains recognition-source.com irco.com
Equipment ClassAccess System Transmitter
Test FirmLS Research, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902-928 MHzChange in identification of presently authorized equipment. Original FCC ID: PM7-DCMI2001 Grant Date: 07/01/20012005-03-25
902-928 MHzClass II permissive change or modification of presently authorized equipment2004-01-14
902-928 MHzClass II permissive change or modification of presently authorized equipment2003-10-21
902-928 MHzOriginal Equipment2001-07-01

Exhibits

DocumentTypeAvailableFile
Antenna manualUsers Manual2004-01-14PDF 3.5 MB
Operational ManualUsers Manual2004-01-14PDF 973.2 KB
PIM manualUsers Manual2004-01-14PDF 1.8 MB
WRI manualUsers Manual2004-01-14PDF 2.1 MB
WUSI manualUsers Manual2004-01-14PDF 1.4 MB
ManualUsers Manual2003-10-21PDF 949.5 KB
ManualUsers Manual2001-07-01PDF 477.7 KB
Internal photos of PIMInternal Photos2004-01-14PDF 730.5 KB
Internal PhotosInternal Photos2003-10-21PDF 407 KB
Internal photosInternal Photos2001-07-01PDF 548.4 KB
Ext photos of EUTExternal Photos2004-01-14PDF 240 KB
PhotosExternal Photos2003-10-21PDF 144.5 KB
External photosExternal Photos2001-07-01PDF 151.4 KB
ID drawing and LocationID Label/Location Info2004-01-14PDF 183 KB
ID label and locationID Label/Location Info2003-10-21PDF 159.5 KB
Label detailsID Label/Location Info2001-07-01PDF 40.9 KB
Block diagramBlock Diagram2001-07-01PDF 27.7 KB
Operational descriptionOperational Description2001-07-01PDF 6 KB
Photos of EUT SetupTest Setup Photos2004-01-14PDF 1.2 MB
Setup photographsTest Setup Photos2003-10-21PDF 512 KB
Test setup photosTest Setup Photos2001-07-01PDF 293.1 KB
Measurement ReportTest Report2004-01-14PDF 718 KB
EUT test reportTest Report2003-10-21PDF 505 KB
Test reportTest Report2001-07-01PDF 915.5 KB
Confidential letter Rev 4Cover Letter(s)2004-01-14PDF 102.2 KB
Confidentiality letterCover Letter(s)2004-01-14PDF 162.9 KB
Cover letterCover Letter(s)2004-01-14PDF 54.2 KB
Letter of authorizationCover Letter(s)2004-01-14PDF 205.7 KB
Rev 3 confidential cover letterCover Letter(s)2004-01-14PDF 102.4 KB
Revised confidentiality requestCover Letter(s)2004-01-14PDF 102.9 KB
Authorization letterCover Letter(s)2003-10-21PDF 446.8 KB
Confidentiality requestCover Letter(s)2003-10-21PDF 393.5 KB
Block diagram PIM Metadata onlyBlock DiagramPDF 549.8 KB
EUT block diagram Metadata onlyBlock DiagramPDF 549.8 KB
Schematic Metadata onlySchematicsPDF 245.2 KB
Schematic Diagram Metadata onlySchematicsPDF 165.6 KB
Schematic diagram Metadata onlySchematicsPDF 165.6 KB
Description of EUT Metadata onlyOperational DescriptionPDF 53.5 KB
Description of EUT Metadata onlyOperational DescriptionPDF 44.7 KB
EUT parts list Metadata onlyParts List/Tune Up InfoPDF 20.4 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 22.1 KB

Application Information

Application IDXxwIfQWLnIBKXdE2v2DZlw==
Final Action Date2005-03-25
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: PM7-DCMI2001 Grant Date: 07/01/2001
Applicant FRN0018919456
ModelDCMI2001
Frequency Range902-928 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionAccess System Transmitter
Responsible PartyGerard Seyler, Vice President of Engineering, gseyler@recognition-source.com , 630-762-4461
Technical ContactDennis R Johanson, Locknetics Security Engineering, dennis_johanson@irco.com , 630-876-5691
Non-Technical ContactMichael Woznicki, Locknetics Security Engineering, mike_woznicki@irco.com , 630-876-5686
Test FirmRyan Urness, LS Research, LLC, rurness@lsr.com , 262-375-4400
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
XxwIfQWLnIBKXdE2v2DZlw==2005-03-25Change in identification of presently authorized equipment. Original FCC ID: PM7-DCMI2001 Grant Date: 07/01/2001
C74QBAh9Ir3HEDPkFVSvaA==2004-01-14Class II permissive change or modification of presently authorized equipment
5AABHtQdP6bZPzfFkTorGA==2003-10-21Class II permissive change or modification of presently authorized equipment
fZYHE2UQ64H+h1d0W3MwHg==2001-07-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902-928 MHz0.300000015C
902-928 MHz0.300000015C41

Grants

TCB Grant - Application XxwIfQWLnIBKXdE2v2DZlw==

This application does not exist.

EAS Grant - Application XxwIfQWLnIBKXdE2v2DZlw==

This application currently is not in final status.

TCB Grant - Application fZYHE2UQ64H+h1d0W3MwHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/01/2001

Application Dated: 07/01/2001
Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-DCMI2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access System Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.3  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device requires professional installation.

EAS Grant - Application fZYHE2UQ64H+h1d0W3MwHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 07/01/2001

Application Dated: 07/01/2001
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-DCMI2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access System Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.3  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device requires professional installation.



TCB Grant - Application C74QBAh9Ir3HEDPkFVSvaA==

This application does not exist.

EAS Grant - Application C74QBAh9Ir3HEDPkFVSvaA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 01/14/2004

Application Dated: 12/12/2003
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-DCMI2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access control panel interface module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.3  

Grant Conditions - The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device requires professional installation.



TCB Grant - Application 5AABHtQdP6bZPzfFkTorGA==

This application does not exist.

EAS Grant - Application 5AABHtQdP6bZPzfFkTorGA==

Mail To:
James Wiemeyer, Engineering Manager
Recognition Source, LLC
3820 Stern Av.
St. Charles, IL 60174
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Recognition Source, LLC
3820 Stern Avenue
St, Charles, IL 60174
United States
  Date of Grant: 10/21/2003

Application Dated: 09/11/2003
 
Attention: Gerard Seyler , Vice President of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PM7-DCMI2001
Name of Grantee:  Recognition Source, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Access control panel interface module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.0  -  928.0 0.3  

Grant Conditions – The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device requires professional installation.



Mail To:
James Wiemeyer, Engineering Manager
Recognition Source, LLC
3820 Stern Av.
St. Charles, IL 60174