FCC ID PODTH-UVF9

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 07/31/2020 Application Dated: 07/31/2020

TYT ELECTRONICS CO., LTD

Block 39-1, Optoelectronics-information

industry base, Nan'an,

Quanzhou, Fujian,, China

Attention: Jiamao Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PODTH-UVF9
Name of Grantee:	TYT ELECTRONICS CO., LTD
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Two-way Radio

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	4.3954	1.095  PM	11K0F3E
EF	90	400.0  -  470.0	3.7239	1.08  PM	11K0F3E

CC Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values are Head 3.84 W/kg, Body-worn 4.10 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan'an, Quanzhou, Fujian,, China

Date of Grant: 07/31/2020 Application Dated: 07/31/2020

Attention: Jiamao Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PODTH-UVF9
Name of Grantee:	TYT ELECTRONICS CO., LTD
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Two-way Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	4.3954	1.095  PM	11K0F3E
EF	90	400.0  -  470.0	3.7239	1.08  PM	11K0F3E

CC Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values are Head 3.84 W/kg, Body-worn 4.10 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application 92P/aim7hCXpxOBd/3zENg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 11/15/2013 Application Dated: 11/15/2013

TYT ELECTRONICS CO., LTD

Block 39-1, Optoelectronics-information industry b

Fujian?China

Quanzhou, China

Attention: Jiamao Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PODTH-UVF9
Name of Grantee:	TYT ELECTRONICS CO., LTD
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Two-way Radio

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	4.416	1.908  PM	11K3F3E
EF	90	400.0  -  470.0	3.767	1.145  PM	11K3F3E

Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values are Head 3.84 W/kg, Body-worn 4.10 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry b Fujian?ChinaP.O. Box , Quanzhou, China

Date of Grant: 11/15/2013 Application Dated: 11/15/2013

Attention: Jiamao Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PODTH-UVF9
Name of Grantee:	TYT ELECTRONICS CO., LTD
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Two-way Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	4.416	1.908  PM	11K3F3E
EF	90	400.0  -  470.0	3.767	1.145  PM	11K3F3E

Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The highest reported SAR values are Head 3.84 W/kg, Body-worn 4.10 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: