FCC ID POJDMLWAN915
Digital Matter LWAN 915
by Digital Matter Embedded
Grantee Code: POJ Product Code: DMLWAN915
Latest application date: 2019-04-11
FCC ID Device Details
| FCC ID | POJDMLWAN915 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | POJ |
| Product Code | DMLWAN915 |
| Applicant Business | Digital Matter Embedded 🇿🇦 |
| Related Domains |  dmem.co.za |
| Equipment Class | Digital Matter LWAN 915 |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-11 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: POJOYSTERLWAN915 Grant Date: 08/27/2018 | 2019-02-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos Host Guppy | Internal Photos | 2019-04-11 | PDF 492.7 KB |
| Internal Photos Host Yabby | Internal Photos | 2019-04-11 | PDF 270.7 KB |
| External Photos Guppy | External Photos | 2019-04-11 | PDF 560.3 KB |
| External Photos Yabby | External Photos | 2019-04-11 | PDF 294.2 KB |
| External Photos | External Photos | 2019-02-28 | PDF 926.4 KB |
| Product Label | ID Label/Location Info | 2019-02-28 | PDF 174.3 KB |
| Test Setup Photos Guppy | Test Setup Photos | 2019-04-11 | PDF 259 KB |
| Test Setup Photos Yabby | Test Setup Photos | 2019-04-11 | PDF 205.6 KB |
| Test Report Host Guppy | Test Report | 2019-04-11 | PDF 1.1 MB |
| Test Report Host Yabby | Test Report | 2019-04-11 | PDF 930.9 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2019-04-11 | PDF 325.9 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2019-04-11 | PDF 674.6 KB |
| Change of ID Authorization Letter | Cover Letter(s) | 2019-02-28 | PDF 78.7 KB |
| Change of ID Request Letter | Cover Letter(s) | 2019-02-28 | PDF 64.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2019-02-28 | PDF 74.1 KB |
| MPE Calculation Guppy | RF Exposure Info | 2019-04-11 | PDF 98.6 KB |
| MPE Calculation Yabby | RF Exposure Info | 2019-04-11 | PDF 98.8 KB |
Application Information
| Application ID | vtxU77DrlQoS+ckPlvCd/A== |
|---|---|
| Final Action Date | 2019-04-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022078604 |
| Model | DMLWAN915 |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Digital Matter LWAN 915 |
| Responsible Party | Adrian John Pickles, Technical Manager, Adrian@dmem.co.za , +27115409274 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add hosts: Guppy LWAN 915, Yabby LWAN 915. PCB Antenna, -1dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Limited Module Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance and must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vtxU77DrlQoS+ckPlvCd/A== | 2019-04-11 | Class II permissive change or modification of presently authorized equipment |
| K9aH4WwzVtQR1Ge+6H+6dg== | 2019-02-28 | Change in identification of presently authorized equipment. Original FCC ID: POJOYSTERLWAN915 Grant Date: 08/27/2018 |
Grants
TCB Grant - Application vtxU77DrlQoS+ckPlvCd/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 04/11/2019 Application Dated: 04/11/2019 |
| Digital Matter Embedded |
| The OVAL, Kingsmead building, CNR Meadowbrook and |
| P.O. Box PO 70732, |
| Johannesburg, 2021 South Africa |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJDMLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Matter LWAN 915 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| C2PC to add hosts: Guppy LWAN 915, Yabby LWAN 915. PCB Antenna, -1dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Limited Module Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance and must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application vtxU77DrlQoS+ckPlvCd/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digital Matter Embedded The OVAL, Kingsmead building, CNR Meadowbrook and P.O. Box PO 70732, Johannesburg, 2021 South Africa |
Date of Grant: 04/11/2019 Application Dated: 04/11/2019 |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJDMLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Matter LWAN 915 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| C2PC to add hosts: Guppy LWAN 915, Yabby LWAN 915. PCB Antenna, -1dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Limited Module Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance and must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/28/2019 Application Dated: 02/28/2019 |
| Digital Matter Embedded |
| The OVAL, Kingsmead building, CNR Meadowbrook and |
| P.O. Box PO 70732, |
| Johannesburg, 2021 South Africa |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJDMLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Matter LWAN 915 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application K9aH4WwzVtQR1Ge+6H+6dg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digital Matter Embedded The OVAL, Kingsmead building, CNR Meadowbrook and P.O. Box PO 70732, Johannesburg, 2021 South Africa |
Date of Grant: 02/28/2019 Application Dated: 02/28/2019 |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJDMLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Matter LWAN 915 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: |