FCC ID POJOYSTERLWAN915
LoRa module
by Digital Matter Embedded
Grantee Code: POJ Product Code: OYSTERLWAN915
Latest application date: 2018-09-19
FCC ID Device Details
| FCC ID | POJOYSTERLWAN915 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | POJ |
| Product Code | OYSTERLWAN915 |
| Applicant Business | Digital Matter Embedded 🇿🇦 |
| Related Domains |  dmem.co.za |
| Equipment Class | LoRa module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-19 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 02/08/2017 | 2018-08-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2018-08-27 | PDF 167.7 KB |
| Product Label | ID Label/Location Info | 2018-09-19 | PDF 163.1 KB |
| Product Label (Host Label) | ID Label/Location Info | 2018-09-19 | PDF 88.4 KB |
| Product Label | ID Label/Location Info | 2018-08-27 | PDF 157.7 KB |
| Test Setup Photos | Test Setup Photos | 2018-09-19 | PDF 241.9 KB |
| DTS Test Report | Test Report | 2018-09-19 | PDF 942.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-09-19 | PDF 379.1 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-09-19 | PDF 439.9 KB |
| Change of ID Authorization Letter | Cover Letter(s) | 2018-08-27 | PDF 76.2 KB |
| Change of ID Request Letter | Cover Letter(s) | 2018-08-27 | PDF 123.6 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-08-27 | PDF 107.1 KB |
Application Information
| Application ID | cB9T4PnzeB7ubyN1OazQAg== |
|---|---|
| Final Action Date | 2018-09-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022078604 |
| Model | OYSTERLWAN915 |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LoRa module |
| Responsible Party | Adrian John Pickles, Technical Manager, Adrian@dmem.co.za , +27115409274 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add host Oyster. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cB9T4PnzeB7ubyN1OazQAg== | 2018-09-19 | Class II permissive change or modification of presently authorized equipment |
| ZK0H+FqTfg/8JtvhlbruZg== | 2018-08-27 | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 02/08/2017 |
Equipment Authorization
Grants
TCB Grant - Application ZK0H+FqTfg/8JtvhlbruZg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/27/2018 Application Dated: 08/27/2018 |
| Digital Matter Embedded |
| The OVAL, Kingsmead building, CNR Meadowbrook and |
| P.O. Box PO 70732, |
| Johannesburg, 2021 South Africa |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJOYSTERLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0544 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application ZK0H+FqTfg/8JtvhlbruZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digital Matter Embedded The OVAL, Kingsmead building, CNR Meadowbrook and P.O. Box PO 70732, Johannesburg, 2021 South Africa |
Date of Grant: 08/27/2018 Application Dated: 08/27/2018 |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJOYSTERLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0544 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 09/19/2018 Application Dated: 09/19/2018 |
| Digital Matter Embedded |
| The OVAL, Kingsmead building, CNR Meadowbrook and |
| P.O. Box PO 70732, |
| Johannesburg, 2021 South Africa |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJOYSTERLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| C2PC to add host Oyster. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application cB9T4PnzeB7ubyN1OazQAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Digital Matter Embedded The OVAL, Kingsmead building, CNR Meadowbrook and P.O. Box PO 70732, Johannesburg, 2021 South Africa |
Date of Grant: 09/19/2018 Application Dated: 09/19/2018 |
| Attention: Adrian Pickles , Technical Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POJOYSTERLWAN915 |
| Name of Grantee: | Digital Matter Embedded |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| C2PC to add host Oyster. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: |