FCC ID POR-WL18DBMOD
WiFi and Bluetooth Module
by NetModule AG
Grantee Code: POR Product Code: WL18DBMOD
Latest application date: 2024-01-26
FCC ID Device Details
| FCC ID | POR-WL18DBMOD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | POR |
| Product Code | WL18DBMOD |
| Applicant Business | NetModule AG 🇨🇭 |
| Related Domains |  netmodule.com |
| Equipment Class | WiFi and Bluetooth Module |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-26 |
| 5745-5825 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2023-11-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2023-11-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 | 2023-11-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| NB1601_MANUAL_EN | Users Manual | 2024-07-22 | PDF 4.1 MB |
| NB800_MANUAL_EN | Users Manual | 2024-07-22 | PDF 4.7 MB |
| NG800_MANUAL_EN | Users Manual | 2024-07-22 | PDF 4.2 MB |
| NB1601_PhotosIntern | Internal Photos | 2024-07-22 | PDF 365.6 KB |
| NB800_PhotosIntern | Internal Photos | 2024-07-22 | PDF 535.9 KB |
| NG800_PhotosIntern | Internal Photos | 2024-07-22 | PDF 408.1 KB |
| NB1601_PhotosExtern | External Photos | 2024-07-22 | PDF 284.3 KB |
| NB800_PhotosExtern | External Photos | 2024-07-22 | PDF 378.6 KB |
| NG800_PhotosExtern | External Photos | 2024-07-22 | PDF 284.3 KB |
| External Photos | External Photos | 2023-11-16 | PDF 949.6 KB |
| TypeLabel_NB1601 | ID Label/Location Info | 2024-01-26 | PDF 623.7 KB |
| TypeLabel_NB800 | ID Label/Location Info | 2024-01-26 | PDF 510.4 KB |
| TypeLabel_NG800 | ID Label/Location Info | 2024-01-26 | PDF 177.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2023-11-16 | PDF 1.2 MB |
| NB1601_BlockDiagram | Block Diagram | 2024-01-26 | PDF 4.6 MB |
| NB800_BlockDiagram | Block Diagram | 2024-01-26 | PDF 2.3 MB |
| NG800_BlockDiagram | Block Diagram | 2024-01-26 | PDF 3.7 MB |
| Antenna datasheetReel_K98PPPPGAR_0300_303_303_303_303_303_N8 | Operational Description | 2024-01-26 | PDF 1 MB |
| Antennadatasheet2WJs_Reel_F70XFR_0300_41_41_R118 | Operational Description | 2024-01-26 | PDF 591.3 KB |
| Coach-2WJs_Reel_F70XFR_0300_41_41_R118 | Operational Description | 2024-01-26 | PDF 591.3 KB |
| Coach-4NGJs_Reel_K98PPPPGAR_0300_303_303_303_303_303_N8 | Operational Description | 2024-01-26 | PDF 1 MB |
| NB1601_OperationalDescription | Operational Description | 2024-01-26 | PDF 446.5 KB |
| NB800_OperationalDescription | Operational Description | 2024-01-26 | PDF 692.6 KB |
| NG800_OperationalDescription | Operational Description | 2024-01-26 | PDF 156.5 KB |
| MDE_NETMO_2205_FCC_Photo_Report | Test Setup Photos | 2024-01-26 | PDF 338.3 KB |
| MDE_NETMO_2206_FCC_Photo_Report | Test Setup Photos | 2024-01-26 | PDF 537.7 KB |
| MDE_NETMO_2207_FCC_Photo_Report | Test Setup Photos | 2024-01-26 | PDF 605.7 KB |
| Antenna_Overview | Test Report | 2024-01-26 | PDF 397.6 KB |
| MDE_NETMO_2205_FCC_01_SimulTx_SIGNED | Test Report | 2024-01-26 | PDF 966.6 KB |
| MDE_NETMO_2206_FCC_02_SimulTx_SIGNED | Test Report | 2024-01-26 | PDF 962 KB |
| MDE_NETMO_2207_FCC_02_SimulTx_SIGNED | Test Report | 2024-01-26 | PDF 954.4 KB |
| Covered_List_Attestation_FCC_ApplicationLetter | Attestation Statements | 2024-01-26 | PDF 283.9 KB |
| US Agent | Attestation Statements | 2024-01-26 | PDF 307.3 KB |
| Covered_List_Attestation_FCC_Application Lette | Attestation Statements | 2023-11-16 | PDF 283.9 KB |
| us_agent_of_service_of_process | Attestation Statements | 2023-11-16 | PDF 307.3 KB |
| Description_of_Change | Cover Letter(s) | 2024-01-26 | PDF 17.3 KB |
| Letter_of_Authorization | Cover Letter(s) | 2024-01-26 | PDF 205 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2024-01-26 | PDF 16 KB |
| NetModule_FCC_Change_in_ID | Cover Letter(s) | 2023-11-16 | PDF 241.8 KB |
| request of change in ID_NetModule | Cover Letter(s) | 2023-11-16 | PDF 12 KB |
| MPE Report | RF Exposure Info | 2024-01-26 | PDF 458.1 KB |
| NB1601_Schematics Metadata only | Schematics | PDF 4.6 MB | |
| NB800_Schematics Metadata only | Schematics | PDF 2.3 MB | |
| NG800_Schematics Metadata only | Schematics | PDF 3.6 MB |
Application Information
| Application ID | a5/YWy7ISdxL8cRebWPmZg== |
|---|---|
| Final Action Date | 2024-01-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022008676 |
| Model | WL18DBMOD |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Urs Gruetter, Urs.Gruetter@netmodule.com , +41319852510 |
| Agent | Melanie Melanie Melanie, 7layers GmbH, melanie.anastassiou@bureauveritas.com  , 492102749311 |
| Technical Contact | Urs Gruetter, NetModule AG, urs.gruetter@netmodule.com , 41319852510 |
| Non-Technical Contact | Urs Gruetter, NetModule AG, urs.gruetter@netmodule.com , 41319852510 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com  , 0049 2102 749 452 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/22/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| a5/YWy7ISdxL8cRebWPmZg== | 2024-01-26 | Class II permissive change or modification of presently authorized equipment |
| Yyyy2RE6eY5ivo8YSsDn8A== | 2024-01-26 | Class II permissive change or modification of presently authorized equipment |
| Uon3bPncQBSxarKMQLVDaA== | 2024-01-26 | Class II permissive change or modification of presently authorized equipment |
| JXdpjAe9RBDbLLBw8SraAw== | 2023-11-16 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
| IhsRKEpXlf17Aca7VWFaRg== | 2023-11-16 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
| 9Dg1OtW51UzG6hAD66FRcg== | 2023-11-16 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 03/27/2018 |
Equipment Authorization
Grants
TCB Grant - Application Yyyy2RE6eY5ivo8YSsDn8A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Yyyy2RE6eY5ivo8YSsDn8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Uon3bPncQBSxarKMQLVDaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application JXdpjAe9RBDbLLBw8SraAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II PermissiveChange is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IhsRKEpXlf17Aca7VWFaRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II PermissiveChange is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application a5/YWy7ISdxL8cRebWPmZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 01/26/2024 Application Dated: 01/23/2024 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| C2PC: This Class II Permissive Change incorporates previously certified modules into the host as described in the filing. The separation distance is 40 cm from all persons. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| NetModule AG |
| NetModule AG |
| Maulbeerstrasse 10 |
| Bern, 3011 Switzerland |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9Dg1OtW51UzG6hAD66FRcg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NetModule AG NetModule AG Maulbeerstrasse 10 Bern, 3011 Switzerland |
Date of Grant: 11/16/2023 Application Dated: 11/08/2023 |
| Attention: Urs Gruetter |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | POR-WL18DBMOD |
| Name of Grantee: | NetModule AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all finalhost configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmitsimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEMintegrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integratorsand end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid onlywhen the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Separate approval is required for all other operating configurations, including portableconfigurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |