- FCC ID1
- PPD2
- PPD-AR5BMB553
FCC ID PPD-AR5BMB55
802.11 b/g MPCI Module
Grantee Code: PPD Product Code: AR5BMB55
Latest application date: 2008-02-19
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|
| 2412-2462 MHz | Original Equipment | 2008-02-19 |
Applications
| Application ID | Date | Purpose |
|---|
| mvlJ//TU7mxKuSriLYqkCA== | 2008-02-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|
| 2412-2462 MHz | 0.2140000 | 15C |
Grants
TCB Grant - Application mvlJ//TU7mxKuSriLYqkCA==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Curtis-Straus LLC
One Distribution Center Circle
Suite #1
Littleton, MA 01460
|
Date of Grant: 02/19/2008
Application Dated: 02/19/2008
|
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
San Jose, CA 95110
|
| |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
PPD-AR5BMB55 |
|
|
| Name of Grantee: |
Qualcomm Atheros, Inc. |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
802.11 b/g MPCI Module |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
15C |
2412.0
-
2462.0
|
0.214
|
|
|
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application mvlJ//TU7mxKuSriLYqkCA==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Qualcomm Atheros, Inc.
1700 Technology Dr
San Jose, CA 95110
United States
|
|
Date of Grant: 02/19/2008
Application Dated: 02/19/2008
|
| |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
PPD-AR5BMB55 |
|
|
| Name of Grantee: |
Qualcomm Atheros, Inc. |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
802.11 b/g MPCI Module |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
15C |
2412.0
-
2462.0
|
0.214
|
|
|
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |