FCC ID PPD-AR5BXB6-M

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 10/20/2006 Application Dated: 10/20/2006

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AR5BXB6 802.11abg PCI Express Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0  -  5320.0	0.041
CC ND	15E	5500.0  -  5700.0	0.06026

Class II permissive change filing. Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150-5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in the previous filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz-band 1.0 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 10/20/2006 Application Dated: 10/20/2006

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AR5BXB6 802.11abg PCI Express Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC ND	15E	5180.0  -  5320.0	0.041
CC ND	15E	5500.0  -  5700.0	0.06026

Class II permissive change filing. Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150-5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in the previous filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz-band 1.0 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Me8qJRmD9KX82kZNcfMQ9w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/21/2005 Application Dated: 11/21/2005

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	PCI Express 802.11 a/b/g Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.041

Class II permissive change filing. Only those antenna(s) documented in this Class II change filing may be used with this transmitter. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. In the 5150MHz to 5250MHz frequency range this transmitter is restricted to indoor.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 11/21/2005 Application Dated: 11/21/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	PCI Express 802.11 a/b/g Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.041

Class II permissive change filing. Only those antenna(s) documented in this Class II change filing may be used with this transmitter. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. In the 5150MHz to 5250MHz frequency range this transmitter is restricted to indoor.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KG/mEW+ZrZH0mF2gs9Ow7Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 07/14/2005 Application Dated: 07/14/2005

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.19
CC	15C	5745.0  -  5825.0	0.141

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 07/14/2005 Application Dated: 07/14/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.19
CC	15C	5745.0  -  5825.0	0.141

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HV7ndDqT9u8WkOKCzmWRiA==

EAS Grant - Application HV7ndDqT9u8WkOKCzmWRiA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 01/11/2006 Application Dated: 12/16/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AR5BXB6 802.11abg PCI Express Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5320.0	0.041

Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150-5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz-band 1.0 W/kg.

TCB Grant - Application AvpRGDZr1/p9hkV2aOntSw==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 07/14/2005 Application Dated: 07/14/2005

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.041

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. In the 5150MHz to 5250MHz frequency range this transmitter is restricted to indoor.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 07/14/2005 Application Dated: 07/14/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.041

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. In the 5150MHz to 5250MHz frequency range this transmitter is restricted to indoor.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5niQP8BOm/3zEKhmdULOWA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/21/2005 Application Dated: 11/21/2005

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Digital Transmission System
Notes:	PCI Express 802.11 a/b/g Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.19
CC	15C	5745.0  -  5825.0	0.141

Class II permissive change filing. Only those antenna(s) documented in this Class II change filing may be used with this transmitter. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 11/21/2005 Application Dated: 11/21/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Digital Transmission System
Notes:	PCI Express 802.11 a/b/g Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.19
CC	15C	5745.0  -  5825.0	0.141

Class II permissive change filing. Only those antenna(s) documented in this Class II change filing may be used with this transmitter. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5+MA0C1gQS3s06yV2cq77Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 01/19/2008 Application Dated: 01/19/2008

Qualcomm Atheros, Inc.

1700 Technology Dr

San Jose, CA 95110

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
ND	15E	5180.0  -  5320.0	0.041
ND	15E	5500.0  -  5700.0	0.06026

Class II permissive change filing. Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150 -5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in the previous filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHzband 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz -band 1.0 W/kg.

ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 01/19/2008 Application Dated: 01/19/2008

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11abg module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
ND	15E	5180.0  -  5320.0	0.041
ND	15E	5500.0  -  5700.0	0.06026

Class II permissive change filing. Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150 -5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in the previous filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHzband 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz -band 1.0 W/kg.

ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 3CQSokqvbtzrPJzoRTDn3g==

EAS Grant - Application 3CQSokqvbtzrPJzoRTDn3g==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States

Date of Grant: 01/11/2006 Application Dated: 12/16/2005

Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	PPD-AR5BXB6-M
Name of Grantee:	Qualcomm Atheros, Inc.
Equipment Class:	Digital Transmission System
Notes:	AR5BXB6 802.11abg PCI Express Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.19
	15C	5745.0  -  5825.0	0.141

Power output listed is conducted. Modular approval for use in mobile-only configurations. In the 5150-5250 MHz frequency range this transmitter is restricted to indoor-only use. This module must be installed by the OEM or OEM integrator. Installation instructions for this module must not be provided to end users. Only antenna(s) documented in filings under this FCC ID may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in filings under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance was evaluated for device in specific computer operating in portable RF exposure conditions as described in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.1 W/kg; 5.2 GHz-band 0.17 W/kg; 5.8 GHz-band 1.0 W/kg.

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037