FCC ID PPD-QCNFA425
Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card
by Qualcomm Atheros, Inc.
Grantee Code: PPD Product Code: QCNFA425
Latest application date: 2021-08-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-02 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-04-30 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-04-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-04-30 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-12-04 |
| 2402 MHz | Class II permissive change or modification of presently authorized equipment | 2017-12-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-12-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-07 |
| 2402-2480 MHz | Original Equipment | 2015-09-02 |
| 5180-5240 MHz | Original Equipment | 2015-09-02 |
| 2402-2480 MHz | Original Equipment | 2015-09-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 7.User Manual Blocked | Users Manual | 2022-01-29 | PDF 1.4 MB |
| 7.User Manual_Rev0513 Blocked | Users Manual | 2021-11-28 | PDF 1.6 MB |
| User Manual Blocked | Users Manual | 2019-01-01 | PDF 3.8 MB |
| User manual Blocked | Users Manual | 2018-10-27 | PDF 2.3 MB |
| User Manual_20170829_v1 - Technical-User Manual.PDF Blocked | Users Manual | 2018-02-25 | PDF 1.3 MB |
| User Manual_20171025_v1 - (QCNFA425) UserMan.pdf Blocked | Users Manual | 2017-12-30 | PDF 1.5 MB |
| Spec&LLW EN Blocked | Users Manual | 2017-11-05 | PDF 367.9 KB |
| user manual Blocked | Users Manual | 2017-11-05 | PDF 4.6 MB |
| User Manual Blocked | Users Manual | 2017-06-07 | PDF 4.1 MB |
| User Manual_20160706_v1 - Technical-User Manual_R1 Blocked | Users Manual | 2017-01-03 | PDF 760.4 KB |
| 14.Internal Photos Blocked | Internal Photos | 2022-01-29 | PDF 1.7 MB |
| 16.Module Lable Blocked | Internal Photos | 2022-01-29 | PDF 73.4 KB |
| 14.Internal Photos Blocked | Internal Photos | 2021-11-28 | PDF 1.1 MB |
| 17.Module photo Blocked | Internal Photos | 2021-11-28 | PDF 205 KB |
| Internal Photos Blocked | Internal Photos | 2019-01-01 | PDF 617.6 KB |
| Internal Photos Blocked | Internal Photos | 2018-10-27 | PDF 2 MB |
| Internal photos Blocked | Internal Photos | 2018-10-27 | PDF 2 MB |
| Internal Photos_20170829_v1 - Photo-Internal Photos.pdf Blocked | Internal Photos | 2018-02-25 | PDF 3.4 MB |
| Internal Photos_20171025_v1 - (QCNFA425) Inpho_SAR.pdf Blocked | Internal Photos | 2017-12-30 | PDF 2.5 MB |
| Internal Photos Blocked | Internal Photos | 2017-11-05 | PDF 309.9 KB |
| Internal Photos Blocked | Internal Photos | 2017-06-07 | PDF 3.7 MB |
| Internal Photos_20160629_v1 - Photo-Internal Photos_R1 Blocked | Internal Photos | 2017-01-03 | PDF 2.4 MB |
| 15.External Photos Blocked | External Photos | 2022-01-29 | PDF 1.1 MB |
| 15.External Photos Blocked | External Photos | 2021-11-28 | PDF 1.6 MB |
| External Photos Blocked | External Photos | 2019-01-01 | PDF 1 MB |
| External photos Blocked | External Photos | 2018-10-27 | PDF 579 KB |
| KR18-SPF0003-B_01585_Qualcomm_NP550XTA_SAR_Report Appendix B. EUT Phot Blocked | External Photos | 2018-10-27 | PDF 540.9 KB |
| KR18-SPF0003-B_01585_Qualcomm_NP550XTA_SAR_Report_Appendix B. EUT Photo Blocked | External Photos | 2018-10-27 | PDF 540.9 KB |
| External Photos_20170829_v1 - Photo-External Photos.pdf Blocked | External Photos | 2018-02-25 | PDF 1.7 MB |
| External Photos_20171025_v1 - (QCNFA425) Expho_SAR.pdf Blocked | External Photos | 2017-12-30 | PDF 660.9 KB |
| External Photos Blocked | External Photos | 2017-11-05 | PDF 918.3 KB |
| External Photos Blocked | External Photos | 2017-06-07 | PDF 624.8 KB |
| External Photos_20160615_v1 - Photo-External Photos Blocked | External Photos | 2017-01-03 | PDF 889.2 KB |
| 6.Label and Label Location Blocked | ID Label/Location Info | 2021-08-02 | PDF 337.2 KB |
| 6.Label and label location_Rev0513 Blocked | ID Label/Location Info | 2021-06-01 | PDF 311.7 KB |
| Label Location Blocked | ID Label/Location Info | 2021-06-01 | PDF 547.7 KB |
| label & location Blocked | ID Label/Location Info | 2018-07-05 | PDF 133.2 KB |
| Label format and location Blocked | ID Label/Location Info | 2018-04-30 | PDF 843.1 KB |
| ID Label & Location Info._20171025_v1 - (QCNFA425) LabelLoc.pdf Blocked | ID Label/Location Info | 2017-12-04 | PDF 33.4 KB |
| ID Label & Location Info._20171025_v1 - (QCNFA425) Labelsmpl.pdf Blocked | ID Label/Location Info | 2017-12-04 | PDF 81.7 KB |
| ID Label & Location Info._20170829_v1 - Technical-Label Location.pdf Blocked | ID Label/Location Info | 2017-09-21 | PDF 152.1 KB |
| ID Label & Location Info._20170829_v1 - Technical-Label.pdf Blocked | ID Label/Location Info | 2017-09-21 | PDF 2 MB |
| label and label location Blocked | ID Label/Location Info | 2017-05-09 | PDF 5.4 MB |
| module label Blocked | ID Label/Location Info | 2017-05-09 | PDF 732.1 KB |
| LabelLoc Blocked | ID Label/Location Info | 2017-05-08 | PDF 46 KB |
| Labelsmpl Blocked | ID Label/Location Info | 2017-05-08 | PDF 114.7 KB |
| 10.SAR Report_Appendix D. Photographs of the Test Set-Up Blocked | Test Setup Photos | 2022-01-29 | PDF 27.7 KB |
| 12.Test Setup Photos Blocked | Test Setup Photos | 2021-11-28 | PDF 403.6 KB |
| 13.SAR Report_Appendix D. Photographs of the Test Set-Up Blocked | Test Setup Photos | 2021-11-28 | PDF 23.8 KB |
| SAR test setup photo Blocked | Test Setup Photos | 2019-01-01 | PDF 227.3 KB |
| KR18-SPF0003-B_01585_Qualcomm_NP550XTA_SAR_Report_Appendix C. Test Pho Blocked | Test Setup Photos | 2018-10-27 | PDF 326.7 KB |
| KR18-SPF0003-B_01585_Qualcomm_NP550XTA_SAR_Report_Appendix C. Test Photo Blocked | Test Setup Photos | 2018-10-27 | PDF 326.7 KB |
| Test setu pphotos Blocked | Test Setup Photos | 2018-10-27 | PDF 314.9 KB |
| Test setup photos Blocked | Test Setup Photos | 2018-10-27 | PDF 314.9 KB |
| Test Setup Photos_20170829_v1 - Photo-Test Setup Photos (SAR).pdf Blocked | Test Setup Photos | 2018-02-25 | PDF 761.1 KB |
| Test Setup Photos_20171025_v1 - (QCNFA425) Tsup_SAR.pdf Blocked | Test Setup Photos | 2017-12-30 | PDF 99.7 KB |
| Test Setup Photos Blocked | Test Setup Photos | 2017-11-05 | PDF 155 KB |
| Test Setup Photos Blocked | Test Setup Photos | 2017-06-07 | PDF 276.5 KB |
| SAR Setup Photos Blocked | Test Setup Photos | 2017-01-03 | PDF 1.1 MB |
| 11.Test Report_BLE APLRSE only_Rev0513 Blocked | Test Report | 2021-06-01 | PDF 817.3 KB |
| 11.Test Report_BT APLRSE only_Rev0513 Blocked | Test Report | 2021-06-01 | PDF 923.7 KB |
| 11.Test Report_RLAN APLRSEPower[FCC]_Rev0527 Blocked | Test Report | 2021-06-01 | PDF 2.2 MB |
| 11.Test Report_WLAN APL RSE only_Rev0513 Blocked | Test Report | 2021-06-01 | PDF 1.4 MB |
| SAR test report Blocked | RF Exposure Info | 2018-07-05 | PDF 3.2 MB |
| SAR test report 1 of 2 Blocked | RF Exposure Info | 2018-04-30 | PDF 2.9 MB |
| SAR test report 2 of 2 Blocked | RF Exposure Info | 2018-04-30 | PDF 5.4 MB |
| Test Report Blocked | Test Report | 2018-04-30 | PDF 3.2 MB |
| test report 1 of 3 Blocked | Test Report | 2018-04-30 | PDF 2.4 MB |
| test report 2 of 3 Blocked | Test Report | 2018-04-30 | PDF 2.5 MB |
| test report 3 of 3 Blocked | Test Report | 2018-04-30 | PDF 2.6 MB |
| Test Report_20171115_v1 - (QCNFA425) TestRpt_SAR part 1_1115.pdf Blocked | Test Report | 2017-12-04 | PDF 879 KB |
| Test Report_20171115_v1 - (QCNFA425) TestRpt_SAR part 2_1115.pdf Blocked | Test Report | 2017-12-04 | PDF 5.7 MB |
| RF Exposure Info._20170829_v1 - Test Report-RF Exposure (SAR_Appendix C1).pdf Blocked | RF Exposure Info | 2017-09-21 | PDF 5.2 MB |
| RF Exposure Info._20170829_v1 - Test Report-RF Exposure (SAR_Appendix C2).pdf Blocked | RF Exposure Info | 2017-09-21 | PDF 4.2 MB |
| RF Exposure Info._20170920_v1 - Test Report-RF Exposure (SAR)_R4 0920.pdf Blocked | RF Exposure Info | 2017-09-21 | PDF 1.5 MB |
| RSE justification Blocked | Attestation Statements | 2018-04-30 | PDF 179.6 KB |
| Cover Letter_20170829_v1 - Cover Letter-Host Family Attestation.pdf Blocked | Cover Letter(s) | 2017-09-21 | PDF 19.1 KB |
| Attestation Letter Blocked | Cover Letter(s) | 2017-05-09 | PDF 95.1 KB |
| 2.Cover Letter FCC Permissive Change Letter_Rev0723 Blocked | Cover Letter(s) | 2021-08-02 | PDF 149 KB |
| 3.Declaration of authorization Blocked | Cover Letter(s) | 2021-08-02 | PDF 129.9 KB |
| 4.Request for non-disclosure Blocked | Cover Letter(s) | 2021-08-02 | PDF 102 KB |
| 5.Signature Authorization QC Atheros Caroline Yu Blocked | Cover Letter(s) | 2021-08-02 | PDF 18.5 KB |
| 2.Cover Letter ermissive Change Letter Blocked | Cover Letter(s) | 2021-06-01 | PDF 148.7 KB |
| 3.Declaration of authorization Blocked | Cover Letter(s) | 2021-06-01 | PDF 228.8 KB |
| 4.Request for non-disclosure Blocked | Cover Letter(s) | 2021-06-01 | PDF 148.2 KB |
| C2PC request Blocked | Cover Letter(s) | 2018-07-05 | PDF 161 KB |
| RSE justification letter Blocked | Cover Letter(s) | 2018-07-05 | PDF 161.6 KB |
| Signature Authorization Blocked | Cover Letter(s) | 2018-07-05 | PDF 18.5 KB |
| agent authorization Blocked | Cover Letter(s) | 2018-07-05 | PDF 227.7 KB |
| confidentility Blocked | Cover Letter(s) | 2018-07-05 | PDF 266.1 KB |
| Agent authorization 1 of 2 Blocked | Cover Letter(s) | 2018-04-30 | PDF 189.3 KB |
| Agent authorization 2 of 2 Blocked | Cover Letter(s) | 2018-04-30 | PDF 44.2 KB |
| C2PC letter Blocked | Cover Letter(s) | 2018-04-30 | PDF 176.5 KB |
| Request for confidentiality Blocked | Cover Letter(s) | 2018-04-30 | PDF 178.5 KB |
| Cover Letters_20171025_v1 - (QCNFA425) FCC C2PC request form - QCNFA425.pdf Blocked | Cover Letter(s) | 2017-12-04 | PDF 182.3 KB |
| Cover Letters_20171025_v1 - (QCNFA425) FCC RSE justification letter.pdf Blocked | Cover Letter(s) | 2017-12-04 | PDF 186.8 KB |
| Cover Letters_20171025_v1 - (QCNFA425) FCC agent authorization.pdf Blocked | Cover Letter(s) | 2017-12-04 | PDF 192 KB |
| Cover Letters_20171025_v1 - (QCNFA425) FCC long and short term confidentility.pd Blocked | Cover Letter(s) | 2017-12-04 | PDF 185 KB |
| Cover Letters_20171025_v1 - (QCNFA425) FCC_auth_sign_Mark-Ortlieb.pdf Blocked | Cover Letter(s) | 2017-12-04 | PDF 44.2 KB |
| Cover Letters_20170829_v1 - Cover Letter-Authorization.pdf Blocked | Cover Letter(s) | 2017-09-21 | PDF 44.2 KB |
| Cover Letters_20170829_v1 - Cover Letter-Class II Permissive Change Declaration. Blocked | Cover Letter(s) | 2017-09-21 | PDF 182.4 KB |
| Cover Letters_20170829_v1 - Cover Letter-Confidentiality.pdf Blocked | Cover Letter(s) | 2017-09-21 | PDF 184.9 KB |
| Cover Letters_20170829_v1 - Cover Letter-POA.pdf Blocked | Cover Letter(s) | 2017-09-21 | PDF 196.5 KB |
| Cover Letters_20170829_v1 - Cover Letter-RSE justification letter.pdf Blocked | Cover Letter(s) | 2017-09-21 | PDF 185.4 KB |
| C2PC request Blocked | Cover Letter(s) | 2017-05-09 | PDF 351.8 KB |
| RSE justification Blocked | Cover Letter(s) | 2017-05-09 | PDF 353.4 KB |
| agent authorization Blocked | Cover Letter(s) | 2017-05-09 | PDF 357.2 KB |
| auth_sign Blocked | Cover Letter(s) | 2017-05-09 | PDF 44.2 KB |
| confidentility Blocked | Cover Letter(s) | 2017-05-09 | PDF 355.4 KB |
| C2PC request Blocked | Cover Letter(s) | 2017-05-08 | PDF 351.6 KB |
| Declaration of authorization Blocked | Cover Letter(s) | 2017-05-08 | PDF 15.2 KB |
| RSE justification letter Blocked | Cover Letter(s) | 2017-05-08 | PDF 356.7 KB |
| agent authorization Blocked | Cover Letter(s) | 2017-05-08 | PDF 359.7 KB |
| confidentility Blocked | Cover Letter(s) | 2017-05-08 | PDF 354.3 KB |
| similarity letter Blocked | Cover Letter(s) | 2017-05-08 | PDF 16.8 KB |
| 10.SAR ReportAppendix B. SAR Plots of SAR Measurement Blocked | RF Exposure Info | 2021-08-02 | PDF 191.4 KB |
| 10.SAR Report_Appendix A. SAR Plots of System Verification Blocked | RF Exposure Info | 2021-08-02 | PDF 200.3 KB |
| 10.SAR Report_Appendix C. Calibration Certificate-1 Blocked | RF Exposure Info | 2021-08-02 | PDF 4.6 MB |
| 10.SAR Report_Appendix C. Calibration Certificate-2 Blocked | RF Exposure Info | 2021-08-02 | PDF 4.9 MB |
| 10.SAR Report_Appendix C. Calibration Certificate-3 Blocked | RF Exposure Info | 2021-08-02 | PDF 4.6 MB |
| 10.SAR Report_Appendix C. Calibration Certificate-4 Blocked | RF Exposure Info | 2021-08-02 | PDF 4.8 MB |
| 10.SAR Report_Rev0728 Blocked | RF Exposure Info | 2021-08-02 | PDF 1.6 MB |
| 13.SAR Report [FCC]_Rev0527 Blocked | RF Exposure Info | 2021-06-01 | PDF 829.4 KB |
| 13.SAR Report_Appendix A. SAR Plots of System Verification Blocked | RF Exposure Info | 2021-06-01 | PDF 211.8 KB |
| 13.SAR Report_Appendix B. SAR Plots of SAR Measurement Blocked | RF Exposure Info | 2021-06-01 | PDF 200.4 KB |
| 13.SAR Report_Appendix C. Calibration Certificate-1-1 Blocked | RF Exposure Info | 2021-06-01 | PDF 4.8 MB |
| 13.SAR Report_Appendix C. Calibration Certificate-1-2 Blocked | RF Exposure Info | 2021-06-01 | PDF 4.8 MB |
| 13.SAR Report_Appendix C. Calibration Certificate-2-1 Blocked | RF Exposure Info | 2021-06-01 | PDF 4.7 MB |
| 13.SAR Report_Appendix C. Calibration Certificate-2-2 Blocked | RF Exposure Info | 2021-06-01 | PDF 5 MB |
| 13.SAR Report_Appendix C. Calibration Certificate-2-3 Blocked | RF Exposure Info | 2021-06-01 | PDF 552.9 KB |
| CALIBRATION REPORT Blocked | RF Exposure Info | 2018-07-05 | PDF 4.1 MB |
| DASY Dipole Measurement Report Blocked | RF Exposure Info | 2018-07-05 | PDF 1.2 MB |
| SAR Report 1 of 2 Blocked | RF Exposure Info | 2018-04-30 | PDF 2.9 MB |
| SAR Report 2 of 2 Blocked | RF Exposure Info | 2018-04-30 | PDF 5.4 MB |
| Appendix C DASY Calibration Blocked | RF Exposure Info | 2017-05-09 | PDF 4 MB |
| Appendix D Plots of SAR Test Result Blocked | RF Exposure Info | 2017-05-09 | PDF 1 MB |
| SAR Blocked | RF Exposure Info | 2017-05-09 | PDF 940.7 KB |
| TestRpt_SAR Blocked | RF Exposure Info | 2017-05-08 | PDF 5.2 MB |
Application Information
| Application ID | o8VdRDcOnDyTsWdmh+Pmvg== |
|---|---|
| Final Action Date | 2021-08-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003716743 |
| Model | QCNFA425 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Responsible Party | Paul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com  , 858-651-1547 |
| Technical Contact | Grace Chen, BTL Inc., grace.chen@newbtl.com  , +886-2-2641-8798 |
| Test Firm | Andy Yeh, BTL Inc., andy.yeh@btl.com.tw  , +886-2-2641-8198 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/29/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| o8VdRDcOnDyTsWdmh+Pmvg== | 2021-08-02 | Class II permissive change or modification of presently authorized equipment |
| jBGwHoWPK6WC39dJH4FcDA== | 2021-08-02 | Class II permissive change or modification of presently authorized equipment |
| BgS56sBcBH/oFtzgWxcuKQ== | 2021-08-02 | Class II permissive change or modification of presently authorized equipment |
| wZH3v8LkpBdYU4+1tnnSfg== | 2021-06-01 | Class II permissive change or modification of presently authorized equipment |
| tUqkCi9+TkDClkTT4jSumw== | 2021-06-01 | Class II permissive change or modification of presently authorized equipment |
| e+3ZC6c0HzBpYz4RRWgauA== | 2021-06-01 | Class II permissive change or modification of presently authorized equipment |
| unzjgyoQdVWJME7z8iFisQ== | 2018-07-05 | Class II permissive change or modification of presently authorized equipment |
| uXJbOJDVtDuTtPacRxr1eg== | 2018-07-05 | Class II permissive change or modification of presently authorized equipment |
| U6kc94QA7FbjGe15UY4O0Q== | 2018-07-05 | Class II permissive change or modification of presently authorized equipment |
| wzpnXp5cslAWZ8Dxfb0Rjw== | 2018-04-30 | Class II permissive change or modification of presently authorized equipment |
| ruIrRAt1dxS3UXLGEun1VQ== | 2018-04-30 | Class II permissive change or modification of presently authorized equipment |
| fA4WscLVaHTj6zRQetB3XA== | 2018-04-30 | Class II permissive change or modification of presently authorized equipment |
| sEIkQgnQdYhYhs9jCIvcpA== | 2017-12-04 | Class II permissive change or modification of presently authorized equipment |
| ZpmjHRH3/Keo6cgJwbHPCw== | 2017-12-04 | Class II permissive change or modification of presently authorized equipment |
| QHl1VQAF8403CVS4oJ41vQ== | 2017-12-04 | Class II permissive change or modification of presently authorized equipment |
| k1Z0kZxkPwstxWmtnpDwWQ== | 2017-09-21 | Class II permissive change or modification of presently authorized equipment |
| U99SIxj90dAYIRSzT2gTKw== | 2017-09-20 | Class II permissive change or modification of presently authorized equipment |
| 6/B/dmc7KH/eUB7kqOZIcQ== | 2017-09-20 | Class II permissive change or modification of presently authorized equipment |
| oxZqk/CSeV6KzayXWDmABg== | 2017-05-09 | Class II permissive change or modification of presently authorized equipment |
| hwioLLP/sM4+DNLnZ0ARCA== | 2017-05-09 | Class II permissive change or modification of presently authorized equipment |
| +dCuh7rVMFU/fWuneCdKkQ== | 2017-05-09 | Class II permissive change or modification of presently authorized equipment |
| mTiriX7JUBN2Rwov0I1RaA== | 2017-05-08 | Class II permissive change or modification of presently authorized equipment |
| GTyyMVQv0qKDKr+GbedPqA== | 2017-05-08 | Class II permissive change or modification of presently authorized equipment |
| 2CRqJwlBB8FKyayHSaWvhA== | 2017-05-08 | Class II permissive change or modification of presently authorized equipment |
| veB4JCMc5+AI33uEQZZghQ== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| Ky6I9ZseiiJqtIPfhG/bQA== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| BU9ZBnPy9TZx4s0BwMQ1tg== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| sHnExEHL0sEL/H+BMpNM2w== | 2016-07-07 | Class II permissive change or modification of presently authorized equipment |
| o9mmvRFJGqLFKl5YERGnhg== | 2016-07-07 | Class II permissive change or modification of presently authorized equipment |
| U0taZmHYg34Xzh9/HjUjaA== | 2016-07-07 | Class II permissive change or modification of presently authorized equipment |
| q2jidIC6y1nPXY5jFVVbmA== | 2015-09-02 | Original Equipment |
| mhiLCsChZfvaFOh5ahcYkg== | 2015-09-02 | Original Equipment |
| hBd6Tg/0NQG+p0nsBE3vKA== | 2015-09-02 | Original Equipment |
| Wiyon/VX4ygVWZE81b3h3Q== | 2015-09-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.002 | 15C | CC |
| 2402-2480 MHz | 0.018 | 15C | CC |
| 2402 MHz | 0.002 | 15C | CC |
| 2402-2480 MHz | 0.013 | 15C | CC |
| 2412-2472 MHz | 0.246 | 15C | CC |
| 2412-2462 MHz | 0.246 | 15C | CC |
| 2422-2462 MHz | 0.189 | 15C | CC |
| 2422-2452 MHz | 0.189 | 15C | CC |
| 5190-5230 MHz | 0.035 | 15E | 38, CC |
| 5190-5230 MHz | 0.035 | 15E | CC |
| 5190-5240 MHz | 0.035 | 15E | 38, CC |
| 5210 MHz | 0.014 | 15E | 38, CC |
| 5210 MHz | 0.014 | 15E | CC |
| 5260-5320 MHz | 0.055 | 15E | 38, CC |
| 5260-5320 MHz | 0.055 | 15E | CC |
| 5270-5310 MHz | 0.046 | 15E | 38, CC |
| 5270-5310 MHz | 0.046 | 15E | CC |
Grants
TCB Grant - Application ZpmjHRH3/Keo6cgJwbHPCw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2402.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.70 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZpmjHRH3/Keo6cgJwbHPCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2402.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.70 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/30/2018 Application Dated: 04/30/2018 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 TypeCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR values across all filings under this FCCID is 0.31 W/kg. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wzpnXp5cslAWZ8Dxfb0Rjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 04/30/2018 Application Dated: 04/30/2018 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 TypeCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR values across all filings under this FCCID is 0.31 W/kg. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/01/2021 Application Dated: 05/26/2021 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Strema 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wZH3v8LkpBdYU4+1tnnSfg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 06/01/2021 Application Dated: 05/26/2021 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Strema 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/02/2015 Application Dated: 09/02/2015 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Wiyon/VX4ygVWZE81b3h3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 09/02/2015 Application Dated: 09/02/2015 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5240.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook/tablet host (ASUSTek Models T102H/R106H/H102H). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths in the 5 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for standalone and simultaneous exposure conditions are 0.36 W/kg and 0.38 W/kg respectively. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.39 W/kg and 0.61 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application veB4JCMc5+AI33uEQZZghQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5240.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook/tablet host (ASUSTek Models T102H/R106H/H102H). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths in the 5 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for standalone and simultaneous exposure conditions are 0.36 W/kg and 0.38 W/kg respectively. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.39 W/kg and 0.61 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR value is 1.22 W/kg. The highest reported SAR value across all filings under this FCC ID is 1.22 W/kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uXJbOJDVtDuTtPacRxr1eg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR value is 1.22 W/kg. The highest reported SAR value across all filings under this FCC ID is 1.22 W/kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.28 W/kg and 1.38 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.28 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application unzjgyoQdVWJME7z8iFisQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.28 W/kg and 1.38 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.28 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/20/2017 Application Dated: 09/20/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models T103H/R107H/H103H) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.6 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U99SIxj90dAYIRSzT2gTKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 09/20/2017 Application Dated: 09/20/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models T103H/R107H/H103H) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.6 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.38 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U6kc94QA7FbjGe15UY4O0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/05/2018 Application Dated: 07/05/2018 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.38 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are <0.1 W/kg and 1.29 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U0taZmHYg34Xzh9/HjUjaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are <0.1 W/kg and 1.29 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/01/2021 Application Dated: 05/26/2021 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Strema 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body is 1.40 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.40 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tUqkCi9+TkDClkTT4jSumw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 06/01/2021 Application Dated: 05/26/2021 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Strema 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body is 1.40 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.40 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 0.39 W/kg and 0.61 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sHnExEHL0sEL/H+BMpNM2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 0.39 W/kg and 0.61 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.87 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sEIkQgnQdYhYhs9jCIvcpA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| 38 CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| 38 CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| 38 CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| 38 CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| 38 CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| 38 CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| 38 CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this application is 0.87 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/30/2018 Application Dated: 04/30/2018 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 TypeCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is <0.10 W/Kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ruIrRAt1dxS3UXLGEun1VQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 04/30/2018 Application Dated: 04/30/2018 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 TypeCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.035 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.014 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.046 | ||
| CC | 15E | 5290.0 - 5290.0 | 0.017 | ||
| CC | 15E | 5500.0 - 5720.0 | 0.053 | ||
| CC | 15E | 5510.0 - 5710.0 | 0.045 | ||
| CC | 15E | 5530.0 - 5690.0 | 0.041 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.057 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.035 | ||
| CC | 15E | 5775.0 - 5775.0 | 0.021 |
| Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is <0.10 W/Kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QHl1VQAF8403CVS4oJ41vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 12/04/2017 Application Dated: 12/04/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/02/2015 Application Dated: 09/01/2015 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application q2jidIC6y1nPXY5jFVVbmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 09/02/2015 Application Dated: 09/01/2015 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/09/2017 Application Dated: 05/09/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (model Lenovo MIIX 320-10ICR, 80XF) with Power reduction. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oxZqk/CSeV6KzayXWDmABg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 05/09/2017 Application Dated: 05/09/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (model Lenovo MIIX 320-10ICR, 80XF) with Power reduction. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 1.08 W/Kg and 1.29 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application o9mmvRFJGqLFKl5YERGnhg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 07/07/2016 Application Dated: 07/07/2016 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.246 | ||
| CC | 15C | 2422.0 - 2462.0 | 0.189 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 1.08 W/Kg and 1.29 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/02/2021 Application Dated: 07/28/2021 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application o8VdRDcOnDyTsWdmh+Pmvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 08/02/2021 Application Dated: 07/28/2021 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/08/2017 Application Dated: 05/08/2017 |
| Qualcomm Atheros, Inc. |
| 1700 Technology Dr |
| San Jose, CA 95110 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUSTeK Computer models TP203N / J203N / R211N / E207N) with Power reduction for Pad mode. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this application for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mTiriX7JUBN2Rwov0I1RaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Atheros, Inc. 1700 Technology Dr San Jose, CA 95110 United States |
Date of Grant: 05/08/2017 Application Dated: 05/08/2017 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPD-QCNFA425 |
| Name of Grantee: | Qualcomm Atheros, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.018 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUSTeK Computer models TP203N / J203N / R211N / E207N) with Power reduction for Pad mode. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this application for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |