FCC ID PPQ-CX8703MB
JukeBlox Networked Media Module
by LITE-ON Technology Corp.
Grantee Code: PPQ Product Code: CX8703MB
Latest application date: 2013-11-14
FCC ID Device Details
| FCC ID | PPQ-CX8703MB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PPQ |
| Product Code | CX8703MB |
| Applicant Business | LITE-ON Technology Corp. 🇹🇼 |
| Related Domains |  liteon.com |
| Equipment Class | JukeBlox Networked Media Module |
| Test Firm | Quie Tek Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-11-14 |
| 2412-2462 MHz | Original Equipment | 2012-10-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (CX870-3MB) UserMan | Users Manual | 2013-11-14 | PDF 1.5 MB |
| (CX870-3MB) UserMan_20121015 | Users Manual | 2012-10-16 | PDF 1.5 MB |
| (CX870-3MB) Inpho | Internal Photos | 2013-11-14 | PDF 785.8 KB |
| (CX870-3MB) Inpho_20121015 | Internal Photos | 2012-10-16 | PDF 551.5 KB |
| (CX870-3MB) Expho | External Photos | 2013-11-14 | PDF 175.8 KB |
| (CX870-3MB) Expho | External Photos | 2012-10-16 | PDF 176.6 KB |
| (CX870-3MB) LabelLoc | ID Label/Location Info | 2012-10-16 | PDF 97.4 KB |
| (CX870-3MB) Labelsmpl | ID Label/Location Info | 2012-10-16 | PDF 37.9 KB |
| (CX870-3MB) Tsup | Test Setup Photos | 2013-11-14 | PDF 138.5 KB |
| (CX870-3MB) Tsup_20121015 | Test Setup Photos | 2012-10-16 | PDF 843.1 KB |
| (CX870-3MB) TestRpt | Test Report | 2013-11-14 | PDF 301.4 KB |
| (CX870-3MB) TestRpt_20121015 | Test Report | 2012-10-16 | PDF 4 MB |
| (CX870-3MB) ATTESTATION | Cover Letter(s) | 2013-11-14 | PDF 10.2 KB |
| (CX870-3MB) ATTESTATION | Attestation Statements | 2012-10-16 | PDF 16.6 KB |
| (CX870-3MB) About WiFi Channels 12 & 13 Declaration letter | Cover Letter(s) | 2013-11-14 | PDF 48.9 KB |
| (CX870-3MB) FCC Class II Change | Cover Letter(s) | 2013-11-14 | PDF 13.3 KB |
| (CX870-3MB) RF_160_03, Declaration of authorization | Cover Letter(s) | 2013-11-14 | PDF 17.9 KB |
| (CX870-3MB) Confidentiality | Cover Letter(s) | 2012-10-16 | PDF 52.1 KB |
| (CX870-3MB) Declaration of authorization | Cover Letter(s) | 2012-10-16 | PDF 46.7 KB |
| (CX870-3MB) FCC Modular Approval Request-_20121015 | Cover Letter(s) | 2012-10-16 | PDF 104.7 KB |
| (CX870-3MB) RFExp | RF Exposure Info | 2013-11-14 | PDF 36.4 KB |
| (CX870-3MB) RFExp | RF Exposure Info | 2012-10-16 | PDF 37.7 KB |
Application Information
| Application ID | NJkiUrOSCRPFHNzllWfnjg== |
|---|---|
| Final Action Date | 2013-11-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022158786 |
| Model | -CX8703MB |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | JukeBlox Networked Media Module |
| Responsible Party | TC Wu, Deputy Director(R & D Division), tc.wu@liteon.com , 86-2222-6181 |
| Agent | QuieTek Corporation, gene@quietek.com  , 886-2-86013788 |
| Technical Contact | Sabina Chen, QuieTek Corporation, sabinachen@quietek.com , 886-2-8601-3788 |
| Test Firm | Sky Hsu, Quie Tek Corporation, skyhsu@quietek.com , 886-2-86013788 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi- ransmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. Class II Permissive Change by adding two antennas. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NJkiUrOSCRPFHNzllWfnjg== | 2013-11-14 | Class II permissive change or modification of presently authorized equipment |
| 1uECZZ1UvjE3e7ZAZyZZKw== | 2012-10-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1750000 | 15C |
Grants
TCB Grant - Application NJkiUrOSCRPFHNzllWfnjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/14/2013 Application Dated: 11/12/2013 |
| LITE-ON Technology Corp. |
| Bldg. C, 90, Chien 1 Rd., Chung-Ho, |
| New Taipei City,, 23585 Taiwan |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-CX8703MB |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.175 |
| Single Modular Approval. Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi- ransmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. Class II Permissive Change by adding two antennas. |
EAS Grant - Application NJkiUrOSCRPFHNzllWfnjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LITE-ON Technology Corp. Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City,, 23585 Taiwan |
Date of Grant: 11/14/2013 Application Dated: 11/12/2013 |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-CX8703MB |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.175 |
| Single Modular Approval. Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi- ransmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. Class II Permissive Change by adding two antennas. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/16/2012 Application Dated: 10/15/2012 |
| LITE-ON Technology Corp. |
| Bldg. C, 90, Chien 1 Rd., Chung-Ho, |
| New Taipei City,, 23585 Taiwan |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-CX8703MB |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.175 |
| Single Modular Approval. Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi- ransmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
EAS Grant - Application 1uECZZ1UvjE3e7ZAZyZZKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LITE-ON Technology Corp. Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City,, 23585 Taiwan |
Date of Grant: 10/16/2012 Application Dated: 10/15/2012 |
| Attention: TC Wu , Deputy Director(R & D Division) |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PPQ-CX8703MB |
| Name of Grantee: | LITE-ON Technology Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.175 |
| Single Modular Approval. Power Output listed is Conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi- ransmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
| Mail To: |